• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.2
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.116-127
• /
• 1994

A method using the linear matrix algebra is developed in order to determine unknown external forces in linear structural analyses. The method defines a matrix which represents the linearity of the vibrational analysis for a structural system. The unknown external forces are determined by the operations of the matrix. The method is applied to find an engine motion in an automobile system. For a simulation process, an exhaust system is modeled and analyzed by the finite element method. The validity of the simulation is verified by comparing with the experimental results the free vibration. Also, an experiment on the forced vibration is performed to determine the damping ratio of the exhaust sysetm. Estimated model parameters(natural frequency, mode shape) are in accord with the experimental results. Because the method merely repeats the transpose and inverse operations of a matrix, the solution is extremely easy and simple. Moreover, it is more accurate than the existing methods in that there is no artificial assumptions in the calculation processes. Therefore, the method is found to be reliable for the analysis of the exhaust system considering the characteristics of vibrations. Although the suggested method is tested by only the exhaust system here, it can be applied to general structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.417-418
• /
• 2006

CATIA V5 is one of the most preferred softwares in product design for domestic and industrial use. But with the development of the IT industry, design data by CATIA V5 can easily be hacked and stolen especially via the internet and through assistance storage medium. The design data could be protected through executive, physical and technical security system. The best way to maintain confidentiality of data from unauthorized access is to have a cryptosystem of the technical security. In this paper, a cryptosystem for the protection of design data was being proposed. The memory contains the file information made by the New and Open function of CATIA V5. No error can be expected even if the file changed before of after the application of Save and Open function, A cryptosystem was constructed in CATIA V5 by inserting crypto algorithm before and after the I/O process. The encryption/decryption algorithm of each function was based on the complex cipher, which applied permutation cipher and transpose cipher. The file security system was programmed in CAA V5 and Visual C++.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.77-81
• /
• 2007

CATIA V5 is one of the most preferred softwares in product design for domestic and industrial use. But with the development of the IT industry, design data by CATIA V5 can easily be hacked and stolen especially via the internet and through assistance storage medium. The design data could be protected through executive, physical and technical security system. the best way to maintain confidentiality of data from unauthorized access is to have a cryptosystem of the technical security. In this paper, a cryptosystem for the protection of design data was being proposed. The memory contains the file information made by the New and Open function of CATIA V5. No error can be expected even if the file changed before of after the application of Save and Open function. A cryptosystem was constructed in CATIA V5 by inserting crypto algorithm before and after the I/O process. The encryption/decryption algorithm of each function was based on the complex cipher, which applied permutation cipher and transpose cipher. The file security system was programmed in CAA V5 and Visual C++.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2017

Using an inverse of the geometric Jacobian matrix is one of the most popular ways to control robot manipulators, because the Jacobian matrix contains the relationship between joint space velocities and operational space velocities. However, the control algorithm based on Jacobian matrix has algorithmic singularities: The robot manipulator becomes unstable when the Jacobian matrix loses rank. To solve this problem, various methods such as damped and filtered inverse have been proposed, but comparative studies to evaluate the performance of these algorithms are insufficient. Thus, this paper deals with a comparative analysis of six representative singularity avoidance algorithms: Damped Pseudo Inverse, Error Damped Pseudo Inverse, Scaled Jacobian Transpose, Selectively Damped Inverse, Filtered Inverse, and Task Transition Method. Especially, these algorithms are verified through computer simulations with a virtual model of a humanoid robot, THORMANG, in order to evaluate tracking error, computational time, and multiple task performance. With the experimental results, this paper contains a deep discussion about the effectiveness and limitations of each algorithm.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.2
• /
• pp.34-37
• /
• 2008

According to the recent design of an HTS (High Temperature Superconducting) power transformer whose capacity is hundreds MVA, the rated current values of the low voltage side are generally over thousands amps. Considering the performance of the recent HTS wires, it is inevitable to use several HTS wires in parallel for large rated current. Lots of stacked HTS wires were fabricated and tested so far, and the results have showed that we have to transpose each wire in order to reduce the AC losses as well as to increase the current capacity. But many development programs about HTS transformers reveal that the transposition of the several wires during the winding process is quite difficult not only in case of the layer windings but also in case of the pancake type ones. So, we need transposed multiple HTS wire which we can handle like single wire or cable for the HTS windings of large capacity power transformer. We fabricated several kinds of samples of multiple HTS wire with transposition to apply it to the HTS windings of power transformer. The electrical characteristics such as critical currents or AC losses are analyzed by experiments in case by case. Finally we present the best design of a multiple HTS wire for power transformer.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.3
• /
• pp.15-19
• /
• 2009

Recently, it is proposed to make striations on the YBCO coated conductor and to transpose each other as one of the solutions to decrease the perpendicular magnetization loss. For large power application using HTS, the stacked conductor packing the YBCO coated conductors should be used because single conductor is limited in flowing of demanded large current. In this paper, we research the affect of the striation and continuously transposed stacking geometry on the magnetization loss in perpendicularly exposed magnetic field. Several short samples having different number of striation and continuously transposed stack are prepared and tested in perpendicularly exposed magnetic field for the magnetization loss characteristics. The magnetization loss of striated sample was lower than sample without striation. The reduction effect on magnetization loss by the striation is obviously appeared in higher field and lower number of stack and decreased as increasing the transposed stacking number. Also, the reduction effect by transposed stack is obviously appeared in lower field at lower number of striation and isn't appeared at higher striation number and higher magnetic field.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.27-34
• /
• 2012

In this paper, the implementation of high throughput two-dimensional (2-D) $8{\times}8$ forward and inverse integer DCT transform for H.264 is presented. The forward and inverse transforms are represented using simple shift and addition operations. Matrix decomposition and matrix operation such as the Kronecker product and direct sum are used to reduce the computation complexity. The proposed design uses integer computations and does not use transpose memory and hence, the resource consumption is also reduced. The maximum operating frequency of the proposed pipelined architecture is 1.184 GHz, which achieves 25.27 Gpixels/sec throughput rate with the hardware cost of 44864 gates. High throughput and low hardware makes the proposed design useful for real time H.264/AVC high definition processing.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.733-738
• /
• 2008

Serial Music, introduced by A. Sch nberg, is a one of the important composition techniques. This music style has features of pantonality and atonality, so it generates unique atmosphere of modern music. In this paper, we introduce an method of generating serial music using mathematical algorithm. This method generates music that satisfy the requirement that the number of pitches belonged to each pitch class are exactly same, though the requirement is less strict than Sch nberg's definition. To do this, our method uses space-filling curves traversing the twelve tone matrix, which is constructed by the serial series, its inversion and its transpose. Using these curves, we can generate a music that has all notes in the matrix exactly once and adequate repeatness because of the curve's locality. Result music, therefore, can be more suitable for people that are not familiar with modern music, while maintaining the features of pantonality and atonality. This paper also introduces a method of generating extended serial music that uses serialism of duration and dynamic of notes, using multi-dimensional space-filling curves.

• Journal of Veterinary Clinics
• /
• v.31 no.2
• /
• pp.133-136
• /
• 2014

An 8 kg, 9-month-old castrated male Shiba Inu presented with a history of intermittent bilateral hind limb lameness. On examination, grade III medial patellar luxation of the bilateral hind limbs was diagnosed. A novel surgical method involving relatively noninvasive tibial tuberosity transposition was used to restore normal alignment of the quadriceps mechanism. The procedure involved an incision on the medial cortical bone of the tibial tuberosity along the tibial crest and placement of a cortical screw on the medial side of the tibial crest to laterally transpose the tibial tuberosity. Lameness and patellar luxation of bilateral hind limbs were improved at a 3-month postoperative examination. This technique could be considered an effective treatment for medial patellar luxation in skeletal immature patients.