• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.415-423
• /
• 2010

Pore network models are useful tools to investigate soil pore geometry. These models provide quantitative information of pore geometry from 3D images. This study presents a pore network model to quantify pore structure and hydraulic characteristics. The objectives of this work were to apply the pore network model to characterize pore structure from large images to quantify pore structure, calculate water retention and hydraulic conductivity properties from a three dimensional soil image, and to combine measured hydraulic properties from experiments with calculated hydraulic properties from image. Soil samples were taken from a site located at the Baltimore science center, which is located inside of the city. Undisturbed columns were taken from the site and scanned with a computer tomographer at resolutions of 22 ${\mu}m$. Pore networks were extracted by medial-axis transformation and were used to measure pore geometry from one of the scanned samples. Water retention and unsaturated hydraulic conductivity values were calculated from the soil image. Properties of soil bulk density, water retention and unsaturated hydraulic conductivity were measured from three replicates of scanned soil samples. 3D image analysis provided accurate detailed pore properties such as individual pore volumes, pore length, and tortuosity of all pores. These data made possible to calculate accurate estimations of water retention and hydraulic conductivity. Combination of the calculated and measured hydraulic properties gave more accurate information on pore sizes over wider range than measured or calculated data alone. We could conclude that the hydraulic property computed from soil images and laboratory measurements can describe a full structure of intra- and inter-aggregate pores in soil.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.449-465
• /
• 2008

Coastal lagoon has experienced a natural geomorphic development process which has been aggraded after the climax of transgression in Holocene. This study estimates superiority on landscape conservation of lagoons and degree of landscape changes during the 20th century as conservation ratios of area and shore length, and analyzes the causes of the changes and classifies the lagoons based on the data by case study of the major 7 coastal lagoons(Hwajinpo, Songjiho, Gwangpoho, Yeongrangho, Maeho, Hyangho, and Gyeongpoho) in the middle East Coast of the Korean Peninsular. Based on the conservation ratios of area and shore length, the areal change is in order of Songjiho($0.56km^2$, 92%), Hwajinpo($2.06km^2$, 90%), Yeongrangho($0.96km^2$, 86%), Hyangho($0.32km^2$, 76%), Gyeongpoho($0.90km^2$, 52%), Maeho($0.14km^2$, 50%), and Gwangpoho($0.07km^2$, 32%), and the shore length change is in order of Hwajinpo(11.90km, 100%), Hyangho(3.34km, 90%), Yeongnangho(7.21km, 89%), Gyeongpoho(7.11km, 79%), Songjiho(5.56km, 79%), Gwangpoho(1.16km, 62%), and Maeho(2.16km, 58%). Therefore, the characteristics of landscape changes of the lagoons in the study area can be represented in order of Hwajinpo(Al), Hyangho(A2), Yeongrangho(A3), Songjiho(A4), Gyeongpoho(B4), Gwangpoho(B5), Maeho(B6). Serious process for land use and industrial development has changed landscape around lagoons decreasing the area of coastal plains dramatically up to this century. Because small lagoons such as Maeho and Gwangpoho have experienced severe transformation and destruction, and Gyeongpoho was transformed into artificial lake for urbanization and tourism, they show dramatic landscape change.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.23-28
• /
• 2016

In spite of various merit of algae as biofuel, the production cost of algae is a considerable obstacle for commercialization. The concurrent development of essential technologies is needed for the cultivating, harvesting, extracting and energy transformation. The production cost of algae biofuel has still higher than that of the other commercial biofuel. The major research activity has been focused on the cultivating and the research of other processes has been done with relatively lower activity. It is difficult to separate the algae from water because of the similar magnitude of density each other. The agglomeration and extracting of algae with the hybrid technology using ultrasonic wave is rare effect of environmental hazard and also it is appropriate technology for the next generation energy resources. The present research is investigated for the effective separation of algae from water with the ultrasonics wave. The aim of the present research is focused on the establishment of optimal design of algae agglomeration system. For this purpose, the computational fluid dynamic analysis has been conducted in the flow field with ultrasonic wave and algae flow to clarify the mechanism of algae separation by ultrasonic wave.

• Journal of Plant Biotechnology
• /
• v.31 no.4
• /
• pp.285-293
• /
• 2004

FMDV is a viral pathogen that caused foot-and-mouth disease in animals. VP1 is a major capsid protein of FMDV. It is known as one of best materials for the FMDV diagnosis and for the development of protein vaccine. In this study, 633 bp of VP1 gene was modified for the expression of VP1 in plant, based on the VP1 DNA sequence from FMDV taiwan O type and from FMDV isolated vietnam. The. deduced DNA fragment was artificially synthesized using the multiple fragment extension with long-nucleotides. A new plant transgenic vector system, pCAMBIA139011 was constructed on the basis of pBI12l and pCAMBIA1390. Using this vector system and GFP gene or modified VP1 gene, each target gene was introduced into Nicotiana tabacum. The insertion of whole target gene was successfully confirmed in each transgenic plant named GFP-A7 and VP1-4, respectively. The expression level of each gene was estimated by RT-PCR and Real-Time PCR using VP1, GFP specific primers.

• Journal of Plant Biotechnology
• /
• v.32 no.4
• /
• pp.233-241
• /
• 2005

Plants have considerable advantages for the production of antigenic proteins because they provide an inexpensive source of protein and an easy administration of vaccine. Since a publication describing edible plant vaccine of HBsAg in 1992, a number of laboratories around the world have studied the use of plants as the bioreactor to produce antigenic proteins of human or animal pathogens. Over the last ten years, these works have been mainly focused on three major strategies for the production of antigenic proteins in plants: stable genetic transformation of either the nuclear or plastid genome, or transient expression in plants using viral vectors. As many antigenic proteins have been expressed in tobacco, also several laboratories have succeeded to express genes encoding antigenic proteins in other crop plants: potato, tomato, maize, carrot, soybean and spinach. At present many works for the production of edible plant vaccine against bacteria-mediated diseases have mostly performed the studies of enterotoxins and adhesion proteins. Also the development of new-type antigens (pili, flagella, surface protein, other enterotoxin and exotoxin etc.) is required for various targets and more efficacy to immunize against microorganism pathogens. Many works mostly studied in experimental animals had good results, and phase I clinical trial of LTB clearly indicated its immunogenic ability. On the other hand, edible plant vaccines have still problems remained to be solved. In addition to the accumulation of sufficient antigen in plants, human health, environment and agriculture regulation should be proven. Also oral tolerance, the physiological response to food antigens and commensal flora is the induction of a state of specific immunological unresponsiveness, needs to be addressed before plant-derived vaccine becomes a therapeutic option.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.633-639
• /
• 2018

High-resolution images using remote sensing (RS) is importance to secure for spatial classification depending on the characteristics of the complex and various factors that make up the river environment. The purpose of this study is to evaluate the accuracy of the classification results and to suggest the possibility of applying the high resolution hyperspectral images obtained by using the drone to perform spatial classification. Hyperspectral images obtained from study area were reduced the dimensionality with PCA and MNF transformation to remove effects of noise. Spatial classification was performed by supervised classifications such as MLC(Maximum Likelihood Classification), SVM(Support Vector Machine) and SAM(Spectral Angle Mapping). In overall, the highest classification accuracy was showed when the MLC supervised classification was used by MNF transformed image. However, it was confirmed that the misclassification was mainly found in the boundary of some classes including water body and the shadowing area. The results of this study can be used as basic data for remote sensing using drone and hyperspectral sensor, and it is expected that it can be applied to a wider range of river environments through the development of additional algorithms.

• Journal of Radiation Protection and Research
• /
• v.20 no.1
• /
• pp.25-36
• /
• 1995

The purpose of this research is to develop stereotactic localization and radiation measurement system for the efficient and precise radiosurgery. The algorithm to obtain a 3-D stereotactic coordinates of the target has been developed using a Fisher CT or angio localization. The procedure of stereotactic localization was programmed with PC computer, and consists of three steps: (1) transferring patient images into PC; (2) marking the position of target and reference points of the localizer from the patient image; (3) computing the stereotactic 3-D coordinates of target associated with position information of localizer. Coordinate transformation was quickly done on a real time base. The difference of coordinates computed from between Angio and CT localization method was within 2 mm, which could be generally accepted for the reliability of the localization system developed. We measured dose distribution in small fields of NEC 6 MVX linear accelerator using various detector; ion chamber, film, diode. Specific quantities measured include output factor, percent depth dose (PDD), tissue maximum ratio (TMR), off-axis ratio (OAR). There was small variation of measured data according to the different kinds of detectors used. The overall trends of measured beam data were similar enough to rely on our measurement. The measurement was performed with the use of hand-made spherical water phantom and film for standard arc set-up. We obtained the dose distribution as we expected. In conclusion, PC-based 3-D stereotactic localization system was developed to determine the stereotactic coordinate of the target. A convenient technique for the small field measurement was demonstrated. Those methods will be much helpful for the stereotactic radiosurgery.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.3
• /
• pp.247-256
• /
• 2011

Existing organic UV protection materials seem to be problematic due to their penetration and irritation to skin. Inorganic UV protection materials are also at issue for safety of their nano-type transformation. Therefore, the recent studies of UV protection materials have been focused not only on the effectiveness but also on their safety. One of the UV protection materials in study which have higher safety is the organic-inorganic conjugation type UV protection material. Previously, we have reported the manufacturing process, physical property and UV protection efficiency of methoxychinnamidoprophy poloysilsesquixan as a new cross-linked polymer type UV protection material. In this study, we have evaluated the effect of the methoxychinnamidoprophy poloysilsesquixan on embryo-fetal development in SD rats. This study is expected to show some definite information related to the effect on pregnancy or embryo-fetal abnormality in case of the clinical exposure of the methoxychinnamidoprophy poloysilsesquixan.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.15-25
• /
• 2019

The development of reliable and objective definitions as well as automated processes for the detection of health care-associated infections (HAIs) is crucial; however, transformation to an automated surveillance system remains a challenge. Early outbreak identification usually requires clinicians who can recognize abnormal events as well as ongoing disease surveillance to determine the baseline rate of cases. The system screens the laboratory information system (LIS) data daily to detect candidates for health care-associated bloodstream infection (HABSI) according to well-defined detection rules. The system detects and reserves professional autonomy by requiring further confirmation. In addition, web-based HABSI surveillance and classification systems use discrete data elements obtained from the LIS, and the LIS-provided data correlates strongly with the conventional infection-control personnel surveillance system. The system was timely, acceptable, useful, and sensitive according to the prevention guidelines. The surveillance system is useful because it can help health care professionals better understand when and where the transmission of a wide range of potential pathogens may be occurring in a hospital. A national plan is needed to strengthen the main structures in HAI prevention, Healthcare Associated Prevention and Control Committee (HAIPCC), sterilization service (SS), microbiology laboratories, and hand hygiene resources, considering their impact on HAI prevention.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.197-210
• /
• 2022

Entomopathogenic fungi can be used to control a variety of sucking and chewing insects, with little effect on beneficial insects and natural enemies. Approximately 170 entomopathogenic fungal insecticides have been registered and used worldwide, with the recent focus being on the mode of action and mechanism of insect-fungal interactions. During the initial period of research and development, the industrialization of entomopathogenic fungi focused on the selection of strains with high virulence. However, improvement in productivity, including securing resistance to environmental stressors, is a major issue that needs to be solved. Although conidia are the primary application propagules, efforts are being made to overcome the limitations of blastospores to improve the economic feasibility of the production procedure. Fungal transformation is also being conducted to enhance insecticidal activity, and molecular biology is being used to investigate functions of various genes. In the fungi-based pest management market, global companies are setting up cooperative platforms with specialized biological companies in the form of M&As or partnerships with the aim of implementing a tank-mix strategy by combining chemical pesticides and entomopathogenic fungi. In this regard, understanding insect ecology in the field helps in providing more effective fungal applications in pest management, which can be used complementary to chemicals. In the future, when fungal applications are combined with digital farming technology, above-ground applications to control leaf-dwelling pests will be more effective. Therefore, for practical industrialization, it is necessary to secure clear research data on intellectual property rights.