• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• Journal of Drive and Control
• /
• v.10 no.4
• /
• pp.7-13
• /
• 2013

A tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. As the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. Though manual and power shuttle transmissions are produced by domestic corporations, development for full-automatic power shift transmissions has never been challenged, and so related technology level is quite low. This paper gives a survey of the automatic transmissions from advanced foreign company, which includes layout of gear train, the way hydraulics controls clutches and brakes, electronic control system. The results are expected to be utilized as a basis in the development of original power train design for tractor.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.172-180
• /
• 1999

The major subject of this paper is to develop the concept fur a Korea high speed train system and recommend to train configuration. High speed train configurations are basically concerned traction power(train configurations with concentrated; CPT or distributed Power system: DPT) and train design(single car as compared with articulated bogies). The result of configuration, a advantages and disadvantaged were necessitated by different train configurations; -distributed underfloor power have an increased length for the seats by 15% as compared with the concentrated power trait - articulated trainsets are characterised by less of number of bogies and reduced values of mass, train resistance, noise and vibration. from the result, the optimized train concept combining high seat capacity per train length with low weight and train resistance is 400m long, single -floor train composed of two symmetrically arranged half trainsets. Therefore, at this work recommended distributed train system However, the final decision of Korea high speed train configuration was concentrated power train and articulated bogie system. The configuration of trainset was 20cars included 2 power cars, 4 motorized cars and 14 trailer cars.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1033-1042
• /
• 2020

Shale shaker which is one of the mud circulation systems is composed of a basket, a vibrator and a screen. Its purpose of a shale shaker is to induce drilling fluid to flow through a screen, transport solids across a screen surface, and discharge solids off the end of the screen. The new shale shaker for the on-shore drilling system is designed to be smaller than the original shale shaker which has the same capacity with the new on to enable to transport and to operate on the trailer. In this study, structural and vibrational analysis of shale shaker was carried out to evaluate the appropriateness of the design in terms of the structural stability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.200-201
• /
• 2022

Off-Site Construction is being widely adopted as an alternative to solve endemic problems in construction industry such as low productivity and efficiency. However, it is strongly recommended to examine the transportation process to be optimized because it determines the size of a modular and influences the cost of the construction. Therefore, in this study simulation model for optimization of modular construction transportation plan was developed using AnyLogic. As a result of the study, the influence of trailer transport capacity and transport time increases as the number of modular which should be transported from factory to site increases.

• The Journal of Economics, Marketing and Management
• /
• v.3 no.1
• /
• pp.1-22
• /
• 2015

High growth and increasing traffic and transport finished vehicles, a significant impact on how organize the flow of parts to auto makers an dagencies have As a result, the automakers to improve its position as a highly responsive, with minimal costs, the out sourcing of their logistics processes. This paperis the result of field research to determine the effectiveness of the logistics industry in Iran and focuses on information technology deals the transport vehicle and parts sales deals, indicators used in the model include: IT focuses, IT Valence, IT Competency, IT Managerial Commitment, IT Resource Commitment and competitive advantage identified. Data collected by questionnaires from managers and experts have been towing companies ISACO and SAIPA trailer hypotheses using structural equation methods and software has been analyzed Amos, Results show, focusing on information technology now has significant impacts on logistics and transport. As a result the impact of, IT valence, IT competency and IT Managerial Commitment analytics to gain competitive advantage was not approved, but the rest of the factors were confirmed.

• Asia pacific journal of information systems
• /
• v.27 no.1
• /
• pp.38-53
• /
• 2017

As sensor technologies and image processing technologies make collecting information on users' behavior easy, many researchers have examined automatic emotion recognition based on facial expressions, body expressions, and tone of voice, among others. Specifically, many studies have used normal cameras in the multimodal case using facial and body expressions. Thus, previous studies used a limited number of information because normal cameras generally produce only two-dimensional images. In the present research, we propose an artificial neural network-based model using a high-definition webcam and Kinect to recognize users' emotions from facial and bodily expressions when watching a movie trailer. We validate the proposed model in a naturally occurring field environment rather than in an artificially controlled laboratory environment. The result of this research will be helpful in the wide use of emotion recognition models in advertisements, exhibitions, and interactive shows.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.253-277
• /
• 2015

When was launched in 2014, it was immediately ranked 2nd in English gross sales record in the first half of 2014, attracting huge attention from avid game users. Colin Moriarty(2014) states that the worldwide popular game, , lies on the alternative history assumption, 'what if Nazi Germany won the second world war? In regard to this, this research addresses how the characteristics of alternative history was adopted and visually represented in FPS game trailer. In terms of research method, firstly, literatures will be reviewed about definition of alternative history and some of the previous examples where alternative history was applied in novels, films and games. Secondly, narrative composition of alternative history is categorized as three sequential phases, (1) borrowing real history material, (2) connection between real and fictional history and (3) reconstruction of history through reinterpretation. Thirdly, the live-action game trailer will be analysed by three sequential phases of narrative composition, and CG game character and background will be analysed by spatial background, characters and props. The phase of 'borrowing' has used the historic images related to the World War II, and the phase of "connection' has composited by "connection through circumstantial events". The phase of 'reconstruction' has unfolded its fictional narrative in the form of "limited fictional history" In addition to this, has constructed dystopia world through composing of historic images and CG characters by SF design. In the light of this, the narrative composition of alternative history successfully extends to game area.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.1
• /
• pp.17-29
• /
• 1999

Objectives. This study was carried out to analyze the hearingthreshold levels and relating factors of 1,048 workers with noiseinduced hearing loss$(D_1)$. Methods. We analyzed the hearing-threshold levels and relating factors of 1,048 workers with noise-induced hearing loss$(D_1)$ examined by the summary reports of specific health examination results of industries and personal reports of specific health examination results reported by 58 specific health examination institutes and 8 secondary pneumoconiosis examination institutes in 1996. Results. Among 1,048 workers at 510 workplaces, male workers were 1,009 (96.3%) and female workers were 39 (3.7%). The mean ages of workers initially exposed to noise and at present were 28.7 and 47.2, respectively. The duration of total exposure was 16.5 years. Average hearing-threshold levels analyzed by three-divided classification of the study subjects were 43.7dB(Lt) and 42.6dB(Rt). Those analyzed by six-divided classification were 50.5dB(Lt) and 48.6d8(Rt). Among workers with noise-induced shearing loss$(D_1)$, 16.3% was unilateral hearing loss and 84.6% was classified to compensation case. 8.8%(Rt) and 10.2%(Lt) of them were suspected to be conductive hearing loss by differences of air-bone hearing-threshold levels. Hearing-threshold levels of workers in manufacturing industry were significantly increased during the short exposure compared with the levels in mining industry. Among manufacturing industries, hearing-threshold levels of workers in trailer and other transportation equipment manufacturing industry were significantly increased. Age and duration of total noise exposure were not significantly related to the average hearing-threshold levels analyzed by three-divided classification. Hearing-threshold levels of female workers were significantly increased during the short exposure compared with those of male workers. Hearing-threshold levels of workers at the high risk group, ages of 20s, 30s and total exposure duration of less than 10 years, were not significantly increased compared with those of the other groups. However, they were exposed at young ages. The 3 leading industries of workers at high risk group were trailer and other transportation equipment manufacturing, automobile manufacturing and assemble-metal manufacturing industries. Conclusions. This study was the first nationwide analysis of the hearing-threshold levels and relating factors of workers with noise. induced hearing loss$(D_1)$. We found the differences of the real number by the statistics of the department of labour and the expected number of worker' s compensations for occupationally-induced hearing loss estimated by this study. According to the results of this study, we should carefully examine the methods to narrow this difference.