• The Journal of Korea CHUNA Manual Medicine
• /
• v.6 no.1
• /
• pp.21-30
• /
• 2005

Objectives : This study was designed to find The characteristics of the Moire topography in patients of HIVD of Cx-spine. Methods : The Moire topography using IBS(Intek-plus Body Scanner 2000, Seoul, Korea) were obtained in 688 people of control group and 105 patients of HIVD of Cx-spine. Each values were studied to determine the difference between controls and patients. Results : There were significantly difference between controls and patients in thoracic ratio, lumbar ratio, top of the thoracic depth ratio, top of the lumbar depth ratio, Z axis distance and DZ/DY. Conclusions : There were increase of the thoracic kyphosis and lower position in top of the thoracic kyphosis in patients of HIVD of Cx-spine than controls.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.507-516
• /
• 2019

The investigation of land characteristics is an important task for the calculation of officially land prices and standard comparison table of land price. Therefore, it should be done objectively and consistently. However, the current investigation system is mainly done by researcher's subjective judgment. Therefore, the objectivity and consistency of this investigation is not guaranteed and questionable. In this study, we first defined the problem by analyzing the current land topography investigation method. In addition, in order to investigate the land topography, the geometry of the parcel is quantified by spatial information and applied to the decision tree based method(C4.5) to produce the final result. This study intended to extract the parcel characteristics data of the topographic by the use of spatial information and to apply the information to the C4.5, there by suggesting a method for addressing the problems. The findings showed approximately 93.5% between the results of topography classification estimated with rules learned by C4.5.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.2
• /
• pp.107-120
• /
• 2007

The purpose of study was planning to a rural community space plan for revitalization of aging in rural society and activity of rural older adults. The rural community type was divided 5 categories by local topography characteristics and road system. According to 5 categories, the rural community space plan was consisted of space plan such as consideration for a rural topography characteristics and activity plan by space which analyzed a relations with rural resource and activity of rural older adults. Results from the rural community planning showed that to improve quality of life and to increase in economic productive activity for rural older adults, moreover to lead a retired oppidan migrate from city to country and to make full use of oppidan's intellectual capacity resource.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.361-375
• /
• 2003

In this study, significant factors influencing on the quality and stability of fermented sausage, such as materials, processing conditions, and microbiological characteristics as well as topography during ripening, were documented. Since most fermented sausages are not heated during manufacture or before consumption, a strict control of the growth of pathogens and the selection of favourable conditions that encourage the specific growth and development of desirable microflora are particularly important. With respect to microbiological safety, hurdles, i.e., preservations(nitrite), redox potential, competitive flora, acidity(pH), and water activity($a_{w}$) are matters of importance to prevent proliferation of bacterial pathogens. Today, for ensuring the safety and quality of the final product, the application of starter cultures in combination with the proper processing is subsequently used in practice. For improving the efficiency of microbiological utility in the production of fermented sausages, the understanding of their topography is essential. The documented different points must be taken into account when HACCP systems set up for the manufacture of fermented sausages. There are continuous researches concerning desirable improvements to sausage fermentation with health enhancing properties.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.25-33
• /
• 2002

Effect of surface topography on the water wetting nature and micro/nano tribological characteristics of Si-wafer and PTFE was experimentally studied. The ion beam treatment was performed with a hollow cathode ion gun in different argon don dose conditions in a vacuum chamber to change the surface topography, Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribo tester, SPM (scanning prove microscope), contact anglemeter and profilometer, respectively. Results showed that surface roughness increased with the argon ion dose. The water wetting angle of tile ion beam treated samples also increased with the ion dose. Results also showed that micro-adhesion and micro-friction depend on the wetting characteristics of the PTFE samples. However, nano-triboloSical characteristics showed little dependence on the wetting angles. The water wetting characteristics of modified PTFE samples were discussed in terms of the surface topographic characteristics.

• Journal of Society of Preventive Korean Medicine
• /
• v.20 no.1
• /
• pp.75-87
• /
• 2016

Objectives : This study aims to classify and analyze literature related to moire topography, as a diagnostic device of Korean medicine, discuss research trends and major results, and demonstrate the value of moire topography. Methods : To investigate moire topography research trends, Korean keywords that signify 'moire' were searched in a Korean journal search engine. Initially, 2,988 papers were found in the research, and, after classifying them and removing those that are duplicate in other databases, only 37 papers were applicable for the literature review in this study. To analyze research trends, the 37 papers were analyzed based on the publication year, research field, journal, and research type, and, clinical articles were classified based on the diagnosis purpose, subject characteristics, diagnosis method, test method, and test result, for analysis. Results : Moire topography research in South Korea was first conducted in 1995 and most active in 2003, mostly in the field of Korean medicine. In the journal analysis, The Journal of Korea CHUNA Manual Medicine for Spine & Nerves published the highest number of papers, most of which were clinical articles and the rest were literature review. And, in the analysis of clinical papers, based on the diagnosis purpose, muscle somatotype measurement was most common, followed by diagnosis of scoliosis. In terms of subjects, most studies focused on elementary, middle, and high school students, and, in terms of the diagnosis method, other tests were used in most studies. The analysis of moire topography methods showed that most studies measured the shoulder, back, and hip, and the most common measurement method in the studies measured the difference in contour lines on the left and right by designating a central line of the body. In terms of the result, most moire topography brought about significant diagnosis results, and many studies demonstrated its use for musculoskeletal diseases in particular. Conclusions : Moire topography is believed to be highly significant for diagnosis and treatment of musculoskeletal diseases and further research will be needed to support it.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.50-58
• /
• 2019

This study was carried out to analysis the landform characteristics of land creep areas in south Korea. Aspect ratio in 17 areas (approximately 46.0 %) among total land creep areas (37 areas) was ranged from 0.37 to 0.92. Also, aspect ratio in 36 areas (approximately 97.0 %) was less than 2. Longitudinal section form ratio of 15 areas (approximately 41.0 %) was less than 1.0, whereas 22 areas (approximately 59.0 %) were more than 1.0. Horseshoe hoof form in land creep areas were mostly appeared to flat land types, whereas convex terrain ground form was prevailed to micro-topography. Mean contour intervals were higher in micro-topography (mean 29.4 m, range 9.5 m ~ 83.2 m) than in except micro-topography (mean 24.3 m, range: 14.4 m ~ 59.4 m) in land creep areas. The contour intervals were slightly wider in micro-topography (mean 5.1 m, range: 4.9 m ~ 23.8 m) than in except micro-topography in land creep areas. The results indicate that contour intervals were significantly different (P < 0.05) between micro-topography and except micro-topography in land creep areas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.192-195
• /
• 2019

Single-crystal diamond obtained by chemical vapor deposition (CVD) exhibits great potential for use in next-generation power devices. Low defect density is required for the use of such power devices in high-power operations; however, plastic deformation and lattice strain increase the dislocation density during diamond growth by CVD. Therefore, characterization of the dislocations in CVD diamond is essential to ensure the growth of high-quality diamond. In this work, we analyze the characteristics of the dislocations in CVD diamond through synchrotron white beam X-ray topography. In estimate, many threading edge dislocations and five mixed dislocations were identified over the whole surface.

• Atmosphere
• /
• v.25 no.3
• /
• pp.449-459
• /
• 2015

Effects of buildings and topography on observation environment of surface wind in central regions of urban areas are investigated using a computational fluid dynamics (CFD) model. In order to reflect the characteristics of buildings and topography in urban areas, geographic information system (GIS) data are used to construct surface boundary input data. For each observation station, 16 cases with different inflow directions are considered to evaluate effects of buildings and topography on wind speed and direction around the observation station. The results show that flow patterns are very complicated due to the buildings and topography. The simulated wind speed and direction at the location of each observation station are compared with those of inflow. As a whole, wind speed at observation stations decreases due to the drag effect of buildings. The decrease rate of wind speed is strongly related with total volume of buildings which are located in the upwind direction. It is concluded that the CFD model is a very useful tool to evaluate location of observation station suitability. And it is expected to help produce wind observation data that represent local scale excluding the effects of buildings and topography in urban areas.