• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.176-184
• /
• 2000

TDC(Time Delay Control) deals with the time-varying system parameters, unknown dynamics and unexpected disturbances using time delay. TDC can be divided into two separate parts: an auxiliary controller and a servo controller. The two controllers can be designed independently. The auxiliary controller is used to reduce sensitivity to parameter variations, nonlinear effects, and other disturbances. The servo controller is to reduce the error between the desired command and output. We propose the model-following time delay controller with modified error feedback controller. This was applied to follow the desired reference model for the uncertain time-varying overhead crane. The model generates the damped-out swinging motion trajectory to suppress the swinging motion caused by the acceleration and the deceleration of crane transportation. The control performance was evaluated through simulations. The theoretical results indicate that this control method shows excellent performance to an overhead crane with the uncertain time-varying parameters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.758-767
• /
• 2000

The properties of linear time-varying(LTV) systems vary because of the time-varying property of plant parameters. The generalized controller design method for linear time-varying systems does not exit because the analytic soultion of dynamic equation has not been found yet. Hence, to design a controller for LTV systems, the robust control methods for uncertain LTI systems which are the approximation of LTV systems have been generally ised omstead. However, these methods are not sufficient to reflect the fast dynamics of the original time-varying systems such as missiles and supersonic aircraft. In general, both the performance and the robustness of the control system which is designed with these are not satisfactory. In addition, since a better model will give the more robustness to the controlled system, a gain scheduling technique based on LTI controller design methods has been uesd to solve time problem. Therefore, we propose a new gain scheduled QFT method for LTV systems based on neural networks in this paper. The gain scheduled QFT involves gain dcheduling procedured which are the first trial for QFT and are well suited consideration of the properties of the existing QFT method. The proposed method is illustrated by a numerical example.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.5-83
• /
• 2002

Perspective dynamical systems arise in machine vision, in which only perspective observation is available, and the essential problem is to estimate the state and /or unknown parameters for a moving rigid body based on the observed information. This paper proposes and studies a Luenberger-type observer for perspective tim e-varying linear systems. In particular, assuming a given perspective time-varying linear system to be Lyapunov stable and to satisfy some sort of observability condition, it is shown that the estimation error converges exponentially to zero. Finally, a simple numerical exam pie is presented to illustrate the result obtained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1592-1598
• /
• 2011

In this paper, a formation control method based on the leader-following approach for nonholonomic mobile robots is proposed. In the previous works, it is assumed that the followers know the leader's velocity by means of communication. However, it is difficult that the followers correctly know the leader's velocity due to the contamination or delay of information. Thus, in this paper, an adaptive approach based on the parameter projection algorithm is proposed to estimate the leader's velocity. Moreover, the adaptive backstepping technique is used to compensate the effects of a dynamic model with the unknown time-invariant and time-varying parameters. From the Lyapunov stability theory, it is proved that the errors of the closed-loop system are uniformly ultimately bounded. Simulation results illustrate the effectiveness of the proposed control method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.52-59
• /
• 1987

A new on-line estimation algorithm for a time varying time delay is proposed. This algorithm is based on the concept of minimization of prediction error. As only the parameters directly related to the poles and zeros of the process are estimated in the algorithm, persistently exciting condition for the convergence of parameters can be less restrictive. Under some assumptions which is necessary in adaptive control, it is shown that this algorithm estimates time varying time delay accurately. In view of computational burden, this algorithm needs far less amount of calculations than other methods. The larger the time delay is, the more effective this algorithm is . Computer simulation shows good properties of the algorithm. This algorithm can be used effectively in adaptive control of large dead time processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.138-141
• /
• 2003

Recently reinforcement learning has attracted attention of many researchers because of its simple and flexible learning ability for any environments. And so far many reinforcement learning methods have been proposed such as Q-learning, actor-critic, stochastic gradient ascent method and so on. The reinforcement learning system is able to adapt to changes of the environment because of the mutual action with it. However when the environment changes periodically, it is not able to adapt to its change well. In this paper we propose the reinforcement learning system that is able to adapt to periodical changes of the environment by introducing the time-varying parameters to be adjusted. It is shown that the proposed method works well through the simulation study of the maze problem with aisle that opens and closes periodically, although the conventional method with constant parameters to be adjusted does not works well in such environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.11-20
• /
• 2015

This paper deals with optimal power allocation for channel estimation of orthogonal frequency-division multiplexing uplinks in time-varying channels. In the existing literature, the estimation of time-varying channel response in an uplink environment can be accomplished by estimating the corresponding channel parameters. Accordingly, the optimal power allocation studied in the literature has been in terms of minimizing the mean square error of the channel estimation. However, the final goal for channel estimation is to enable the application of coherent detection, which usually means high spectral efficiency. Therefore, it is more meaningful to optimize the power allocation in terms of capacity. In this paper, we investigate capacity with imperfect channel estimation. By exploiting the derived capacity expression, an optimal power allocation strategy is developed. With this developed power allocation strategy, improved performance can be observed, as demonstrated by the numerical results.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.913-916
• /
• 1988

Indirect adaptive pole assignment PID controllers for unknown systems with time varying delay, is proposed. Unknown system parameters are estimated by recursive least square method, and time varying delay is estimated using indirect predictors. Since the order of parameter vectors didn't increase, the computational burden is not largely increased in spite of using indirect adaptive control method with time varying delay estimation. Computer simulation is performed to illustrate the efficiency of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.3
• /
• pp.307-316
• /
• 2007

In real system application, the interacting multiple model (IMM) based algorithm operates with the following problems: it requires less computing resources as well as a good performance with respect to the various target maneuvering, it requires a robust performance with respect to the time-varying measurement noise, and further, it requires an easy design procedure in terms of its structures and parameters. To solve these problems, an adaptive fuzzy interacting multiple model (AFIMM) algorithm, which is based on the basis sub-models defined by considering the maneuvering property and the time-varying mode transition probabilities designed by using the mode probabilities as the inputs of the fuzzy decision maker whose widths are adjusted, is proposed. To verify the performance of the proposed algorithm, a radar target tracking is performed. Simulation results show that the proposed AFIMM algorithm solves all problems in the real system application of the IMM based algorithm.