• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4077-4082
• /
• 2023

Large areas must be rapidly screened to monitor radiation in marine environments. For this purpose, this study developed a mobile real-time gamma-ray measurement system for shipboard use and evaluated its performance. The system was developed to measure engine or generator cooling water by installing a canister inside the ship. The minimum detectable activity of the system is about 0.8 Bq/L for a 60 s measurement period, and real-time data transmission and remote control are possible. The system was tested in the field and is currently being installed and operated on ships in service. Such a ship-based real-time gamma-radiation measurement system is suitable for a wide range of marine radiation surveillance applications and is expected to be rapidly deployed.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.25-32
• /
• 2017

Most of weapon systems use aided navigation system which integrates inertial navigation and aiding sensors to compensate the INS errors increasing with the passage of time. Various aid sensors can be applied such as Global Navigation Satellite System (GNSS), radar, barometer, etc., but there might exist time delay caused by signal processing or transferring aid information. This time delay leads out-of-sequence measurements (OOSM) systems. Previously, optimal and suboptimal measurment update method for OOSM systems, where the time delay length are known, are proposed. However, previous algorithm does not guarantee the positive definite property of covariance matrix. In order to improve numerical stability for aided navigation using delayed-measurement, this paper proposes a new measurement covariance update algorithm be similar to Joseph-form in Kalman filter. Futhermore, we propose how to implement it in indirect feedback Kalman filter structure, which is commonly used in aided navigation systems, for time-delayed measurement systems. Simulation and vehicle test results show effectiveness of a proposed algorithm.

• 대한임베디드공학회논문지
• /
• 제18권3호
• /
• pp.117-124
• /
• 2023

In the machine vision inspection equipment, diameter measurement is important process in inspection of cylindrical object. However, machine vision inspection equipment requires complex algorithm processing such as camera distortion correction and perspective distortion correction, and the increase in processing time and cost required for precise diameter measurement. In this paper, we proposed the algorithm for diameter measurement of cylindrical object using the laser displacement sensor. In order to fit circle for given four input outer points, grid search algorithms using root-mean-square error and mean-absolute error are applied and compared. To solve the limitations of the grid search algorithm, we finally apply the singular-value-decomposition based circle fitting algorithm. In order to compare the performance of the algorithms, we generated the pseudo data of the outer points of the cylindrical object and applied each algorithm. As a result of the experiment, the grid search using root-mean-square error confirmed stable measurement results, but it was confirmed that real-time processing was difficult as the execution time was 10.8059 second. The execution time of mean-absolute error algorithm was greatly improved as 0.3639 second, but there was no weight according to the distance, so the result of algorithm is abnormal. On the other hand, the singular-value-decomposition method was not affected by the grid and could not only obtain precise detection results, but also confirmed a very good execution time of 0.6 millisecond.

• 한국정보통신학회논문지
• /
• 제25권5호
• /
• pp.677-684
• /
• 2021

본 논문은 절대 시간 측정 가능한 시간 디지털 변환기에 대한 논문으로 제안하는 시간 디지털 변환기는 0.18-um CMOS 공정을 이용하여 설계 되었고 IC로 제작하여 검증하였다. 설계된 시간 디지털 변환기는 라이다 시스템에 적용하기 위하여 긴 측정시간과 절대적인 50ps를 측정할 수 있어야하는데 위상고정루프의 625MHz 클록을 기준클록으로 사용하기 때문에 절대시간의 측정이 가능하며 디지털 보정회로를 이용하여 어떤 상황에서 든 50ps의 분해능을 가질 수 있다. 기준클록을 카운터하여 큰 시간 단위의 측정을 할 수 있어 최대 800ns의 시간이 측정가능하고 딜레이 체인을 이용하여 정밀한 시간 값을 측정 할 수 있다. 결과적으로 제작된 시간 디지털 변환기는 50ps 단위로 시간을 측정할 수 있는데 최대 오차는 INL 0.8-LSB정도이며 1.8V 인가전압에 전력 소모는 약 70mW 정도이다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2002-2007
• /
• 2010

The objective of this study is the developement monitoring measurement using global positioning digital datalogger system for monitoring measurement of railway construction sites. For the replacement of current passive data communication, Global positioning digital datalogger system using active communication is studied for the first time with in a country. Therefore data communication method and analyzing program of automatic measurement data is developed for the global positioning automatic digital datalogger system. The results of this study will be using real time automatic monitoring measurement of railway structures.

• 한국정보과학회논문지:정보통신
• /
• 제37권1호
• /
• pp.27-34
• /
• 2010

본 논문에서는 네트워크 트래픽의 수동적 측정치 분석을 통해 잘 알려진 장거리 상관관계가 광역 네트워크의 능동적 측정치에도 존재하는지 여부를 관련 분석법을 통하여 검정하고자 한다. 이를 위하여 PingER 프로젝트를 통하여 측정된 광역 네트워크 트래픽의 대표적인 능동적 측정치인 RTT(Round Trip Time)와 RTT의 변동성 시계열 데이터에 대하여 분석을 수행하였다. RTT 시계열 데이터는 장거리 상관관계 혹은 1/f 노이즈의 특성을 보였으며, RTT의 고차원 변화량으로 정의된 변동성은 로그정규분포를 따르며 변동성에 대한 장거리 상관관계는 고려하는 시간 간격이 짧은 경우 장거리 상관관계를 보이고, 시간 간격이 긴 경우에는 장거리 상관관계 혹은 1/f 노이즈를 따름을 밝혔다. 본 연구를 통해 볼 때 장거리 상관관계는 비단 패킷 도착의 시간 간격 등과 같은 수동적 측정뿐만 아니라 RTT와 같은 능동적 측정에서도 나타나는 특징이며, 특히 능동적 측정에는 수동적 측정에는 잘 나타나지 않는 1/f 노이즈 특성이 존재함을 밝혔다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.225-228
• /
• 2009

The simulated indoor pass-by noise measurement system is the tool to measure and evaluate the pass-by noise at the test laboratory, without doing measurement at the field. This measurement system can realize the precision measurement under the specific condition and overcome the limitations of the field measurement, i.e. weather conditions, repeatability, .. This measurement system is done in time domain process using the array techniques, which synchronizes the time signals. The reliability of the obtained result depends on the array shapes, which can generate the moving source effect. In this paper, the validations are checked focusing the time domain synchronization of the signals with the optimum microphone array shape.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.378-386
• /
• 2002

Multi-path ultrasonic Sow measurement system uncertainty is determined by assigning an expected error of each component of flow measurement and then defining the total flow measurement uncertainty as square root of the sum of squared values of the individual error. Sources of uncertainty for flow measurement are geometry, transit time and velocity profile integration uncertainty. A theoretical uncertainty model for multi-path ultrasonic transit time flowmeter configured with parallel 5 chords, is derived from and calculated by dry calibration method.

• 에너지공학
• /
• 제11권3호
• /
• pp.230-236
• /
• 2002

전력계통 실시간 제어에서는 전압, 전류, 유효전력, 무효전력, 역률, 시스템 주파수 등 전력계통 변수들을 측정하는 것이 중요하다. 이 변수들은 전압과 전류의 동기화된 페이저 정보부터 추출할 수 있다. 따라서 전압 및 전류의 동기화된 페이저 측정은 실시간 전력계통 제어에서 매우 중요한 역할을 한다. 이런 이유로 동기위상측정장치가 개발되었고 본 논문에서는 동기위상측정장치의 설계와 구현한 것을 제시하였고 제작된 시작품을 RTDS(Real-time Digital Simulator)와 실험실에 있는 380 V 3상 배전계통에 적용하여 측정된 실험결과를 통해 개발된 시작품의 성능을 검증하였다.