• 전자공학회논문지
• /
• 제50권1호
• /
• pp.180-184
• /
• 2013

이 논문에서는 (SOI) CMOS 공정을 이용한 저전력 안테나 스위치 컨트롤러 IC가 설계되었다. 제안 된 컨트롤러는 전력 수용능력과 고조파 왜곡 성능을 향상시키기 위하여 입력 신호에 따라 안테나 스위치를 구성하는 FET소자의 게이트 단자와 바디 단자에 +VDD, GND 그리고 -VDD에 해당하는 3 가지 상태의 로직 레벨을 제공한다. 또한, 입력-결합 전류제한 링 발진기와 하드웨어 효율적인 레벨 시프터를 적용함으로서 전력소모와 하드웨어 복잡도를 크게 감소시켰다. 제안 된 회로는 +2.5 V 전원을 공급받으며 송신 모드에서 135 ${\mu}A$를 소모하며 10 ${\mu}s$의 빠른 start-up 시간을 달성하였고, 전체 면적은 $1.3mm{\times}0.5mm$로 설계되었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.858-864
• /
• 2014

Recently, many researches have shown that even photosynthetic light-harvesting pigment-protein complexes can have quantum coherence in their excitonic energy transfer at cryogenic and physiological temperatures. Because the protein supplies such noisy environment around pigments that conventional wisdom expects very short lived quantum coherence, elucidating the mechanism and searching for an applicability of the coherence have become an interesting topic in both experiment and theory. We have previously studied the quantum coherence of a phycocyanin 645 complex in a marine algae harvesting light system, using Poisson mapping bracket equation (PBME). PBME is one of the applicable methods for solving quantum-classical Liouville equation, for following the dynamics of such pigment-protein complexes. However, it may suffer from many defects mostly from mapping quantum degrees of freedom into classical ones. To make improvements against such defects, benchmarking targets with more accurately described dynamics is highly needed. Here, we fall back to reduced hierarchical equation of motion (HEOM), for such a purpose. Even though HEOM is known to applicable only to simplified system that is coupled to a set of harmonic oscillators, it can provide ultimate accuracy within the regime of quantum-classical description, thus providing perfect benchmark targets for certain systems. We compare the evolution of the density matrix of pigment excited states by HEOM against the PBME results at physiological temperature, and observe more sophisticated changes of density matrix elements from HEOM. In PBME, the population of states with intermediate energies display only monotonically increasing behaviors. Most importantly, PBME suffers a serious issue of wrong population in the long time limit, likely generated by the zero-point energy leaking problem. Future prospects for developments are briefly discussed as a concluding remark.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.152-160
• /
• 2011

The electromagnetic characteristics of FCEVs (fuel cell electric vehicles) are much different from the existing combustion engine cars as well as hybrid, plug-in-hybrid, and pure electric vehicles due to the high voltage/current generated by a fuel cell stack which uses a compressed hydrogen gas reacted with oxygen. To operate fuel cell stack efficiently, BOP (Balance of Plant) which is consisted of many motors in water pump, air blower, and hydrogen recycling pump as well as inverters for these motors is essential. Furthermore, there are also electric systems for entertainment, information, and vehicle control such as navigation, broadcasting, vehicle dynamic control systems, and so on. Since these systems are connected by high voltage or general cables, EMC (Electromagnetic compatibility) analysis for high voltage and general cable of FCEV is the most important element to prevent the possible electric functional safety errors. In this paper, electromagnetic fields by high voltage and general cables for FCEVs is studied. From numerical analysis results, total time harmonic electromagnetic field strength from high voltage and general cables have difference of 13~16 dB due to ground effect by impedance matching. The EMI results of FECV at 10 m distance shows difference of 41 dB at 30 MHz and 54 dB at 230 MHz compared with only general cable routing.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.197-204
• /
• 2010

본 논문은 저 전압 및 저 왜곡 스위치형 커패시터 (switched-capacitor, SC)를 적용한 새로운 형태의 몸체효과 보상형 스위치 구조를 제안한다. 제안된 회로는 저 전압 SC회로를 위해서 rail-to-rail 스위칭을 허용하며, 기존의 부트스트랩 된 회로 (19dB)보다 더 우수한 총 고조파 왜곡을 가진다. 설계된 2-1 캐스케이드 시그마 델타 변조기는 통신 송수신 시스템내의 오디오 코덱을 위한 고해상도 아날로그-디지털변환을 수행한다. 1단 폴드형 캐스코드 연산증폭기 및 2-1 캐스케이드 시그마 델타 변조기는 0.25 마이크론 이중 폴리 3-금속 표준 CMOS 공정으로 제작되었으며, 2.7V에서 동작한다. 연산증폭기의 1% 정착시간은 16 pF의 부하 용량에 대해 560ns를 보였다. 제작된 시그마 델타 변조기에 대한 검사는 비트 스트림 검사 및 아날로그 분석기를 이용하여 수행 되었다. 다이크기는 $1.9{\times}1.5\;mm^2$였다.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.124-129
• /
• 1990

PWM 인버터에서 임의로 선택한 5,7,11차 고조파를 제거할 때, 후리에 급수를 이용하여 비선형 연립방식을 선형 연립방정식으로 바꾸어 점호각을 분석하던 기존의 방법으로부터 새로운 방법을 구현하였다. 후리에 급수를 이용하여 기억소자에 점호각을 look-up 표로 기억시키거나, 또는 점호각 계산 프로그램을 반복 수행하여 점호시각에 트리거하던 기존의 방법으로는 실시간 제어가 곤란하였다. 본 논문에서는 제안된 왈쉬 급수를 이용하여 점호각을 계산하고 하드웨어로 구성하여 입력되는 클럭 주파수만 가변하면, 즉시로 가변된 주파수가 출력되므로 실시간 제어가 가능함을 밝혔다. 또한 Ordered orthogonal 함수를 이용하여 단상회로와 동일한 하드웨어 구성으로 3장 출력이 가능함을 실험을 통하여 확인하였다.

• 한국산림과학회지
• /
• 제107권2호
• /
• pp.158-165
• /
• 2018

산지하천의 평균유속을 정확하게 추정하는 것은 하천의 수리적 흐름을 이해하고, 사방댐과 같은 사방구조물 최적 설계를 위해 중요하다. 산지하천의 평균 유속에 대한 연구는 부족한 실정이나 최근에는 상대적으로 자료 확보가 용이한 유량 자료를 이용하여 유량과 평균유속의 관계를 파악하는 연구들이 많이 진행되고 있다. 이 연구에서는 8개소의 서로 다른 산지소하천에서 조사된 87회의 유량과 평균 유속 자료를 분석하였다. 산지하천의 유량과 평균유속을 측정하기 위해 salt-dilution 방법을 사용하였으며, 평균유속은 도달 시간의 조화 평균을 적용하여 구하였다. 하천의 거칠기 높이를 이용하여 유량과 유속과의 무차원 관계식을 도출하였다. 거칠기 높이는 하상재료의 $D_{50}$, $D_{84}$와 하상변위의 ${\sigma}_{pro}$, $IPR_{90}$를 이용하였으며, ${\sigma}_{pro}$와 $IPR_{90}$의 정확성이 더 높게 나타났다. 일반적으로 유량과 평균 유속은 지수함수 관계를 보였다.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3079-3094
• /
• 1996

Recently, the high-precision vibration attenuation technology becomes the essence fo the seccessful development of high-integrated and ultra-precision industries, and is expected to continue playing a key role in the enhancement of manufacturing technology. Vibration isolation system using an air-spring is widely employed owing to its excellent isolation characteristics in a wide frequency range. It has, however, some drawbacks such as low-stiffness and low-damping features and can be easily excited by exogenous disturbances, and then vibration of table is remained for a long time. Consequently, the need for active vibration control for an air-spring vibration isolation system becomes inevitable. Furthermore, for an air-spring isolation table to be successfully employed in a variety of manufacturing sites, it should have a guaranteed robust performance not only to exogenous disturbances but also to uncertainties due to various equipments which might be put on the table. In this study, an active vibration suppression control system using H.inf. theory is designed and experiments are performed to verify its robust performance. An air-spring vibration isolation table with voice-coil-motors as its actuators is designed and built. The table is modeled as 3 degree-of-freedom system. An active control system is designed based on $H_\infty$control theory using frequency-shaped weighting functions. Analysis on its performance and frequency responce properties are done through numerical simulations. Robust characteristics of$H_\infty$ control on disturbances and model uncertainties are experimentally verified through (i) the transient response to the impact excitation of the table, (ii) the steady-state response to the harmonic excitation, and (iii) the response to the mass change of the table itself. An LQG controller is also designed and its performance is compared with the $H_\infty$ controller.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.143-156
• /
• 2015

함수구배재료의 모드 III 균열이 물성치 구배방향과 다른 방향으로 비정상적으로 전파할 때 전파균열선단부근의 응력 및 변위장에 대하여 연구하였다. 함수구배재료는 밀도가 일정한 상태에서 전단탄성계수가 선형적으로 변화하는 경우와 밀도와 전단탄성계수가 지수형적으로 변화하는 경우로 가정했다. 조화함수의 해를 얻기 위하여 일반적인 편미분방정식의 동적평형방정식을 라플라스 방정식으로 변환하였다. 라플라스 방정식으로부터 균열속도 변화률, 응력확대계수의 변화률 등에 의존되는 응력장과 변위장을 근접해법으로 얻었다. 본 연구에서 얻어진 응력장과 변위장을 사용하여 재료의 비 균질성, 균열속도의 변화률, 응력확대계수의 변화률 등을 고려한 상태에서 균열이 임의의 방향으로 전파할 때 균열선단부근의 응력 및 변위 그리고 응력확대계수에 대하여 연구하였다.

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.287-316
• /
• 2017

This paper studies the particularities of the forced vibration of the hydro-elastic system consisting of a moving elastic plate, compressible viscous fluid and rigid wall. This study is made by employing the discrete-analytical solution method proposed in the paper by the authors (Akbarov and Panakhli (2015)). It is assumed that in the initial state the fluid flow is caused by the axial movement of the plate and the additional lineally-located time-harmonic forces act on the plate and these forces cause additional flow field in the fluid and a stress-strain state in the plate. The stress-strain state in the plate is described by utilizing the exact equations and relations of the linear elastodynamics. However, the additional fluid flow field is described with linearized Navier-Stokes equations for a compressible viscous fluid. Numerical results related to the influence of the problem parameters on the frequency response of the normal stress acting on the plate fluid interface plane and fluid flow velocity on this plane are presented and discussed. In this discussion, attention is focused on the influence of the initial plate axial moving velocity on these responses. At the same, it is established that as a result of the plate moving a resonance type of phenomenon can take place under forced vibration of the system. Moreover, numerical results regarding the influence of the fluid compressibility on these responses are also presented and discussed.

• 대한후두음성언어의학회지
• /
• 제24권2호
• /
• pp.112-117
• /
• 2013

Background and Objectives : This study aimed to determine the clinical effect of $Artecoll^{(R)}$ injection laryngoplasty for patients with vocal atrophy and mild sulcus vocalis. Materials and Method : Forty-one patients with vocal atrophy and/or mild sulcus vocalis received transcutaneous $Artecoll^{(R)}$ injection into the vocal folds under local anesthesia. Subjective evaluations including voice handicap index (VHI) and perceptual grading with Grade, Roughness, Breathiness, Asthenia, Strain (GRBAS) scales and objective evaluations including jitter, shimmer, noise-to-harmonic ratio (NHR), speaking fundamental frequency (SFF) and maximum phonation time (MPT) were evaluated before and 3 months after the injection. Results : VHI and Grade, Breathiness and Strain scales in GRBAS showed significant improvement 3 months after injection. SFF and MPT also significantly improved after the injection ; MPT increased and SFF in male patients decreased. Conclusion : Injection laryngoplasty with $Artecoll^{(R)}$ is an effective method for correcting the glottal insufficiency and improving voice quality in patients with vocal atrophy and/or mild sulcus.