• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.82-94
• /
• 1997

For the purpose of establishing the most appropriate method of bonding between glass ionomer liners and composite resin and comparing the materials for sandwich technique, an experiment was performed to measure the shear bond strengths between the two with the variables in the surface treatment of liners and elapsed time till composite buildup. Materials used were Vitrebond and Fuji II LC, each as the restorative and liner respectively, and each group was subdivided by surface treatment (acid etching and sandblasting) and time elapsed from GIC filling to composite buildup (immediately, 1 day, 7 days), consisting 12 groups as a whole. Each subgroup was composed of 10 specimens and the shear bond strength between GIC liners and composite resin was measured under UTM and analyzed. The result were as follows: 1. The shear bond strength between two materials was highest when initially filled Fuji II LC was sandblasted after 1 days and composite built-up (Group FS1). And the lowest value was found when GIC was acid-etched after 7 days and composite built-up (Group FE7). Significant difference was found between the two groups. (P<0.01) 2. In regard of surface treatment of GI liners, acid-etched group (VE) showed higher bond strength than sandblasted group (VS) for Vitrebond. But, the reverse was true for Fuji II LC. (P<0.05) 3. In regard to the time elapsed from GI filling to composite buildup, the group of 1 day elapse showed relatively higher strength for Vitrebond. On the contrary, immediate buildup group (FE0) was stronger for acid-etched group and 1 day elapse group(FS1) was higher for sand-blasted group in Fuji II LC. (P<0.05)

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.5
• /
• pp.783-790
• /
• 2016

Objectives: The purpose of this study is to evaluate the non-enzymatic antioxidants stabilities in dentifrices by ascorbic acid and tocopherol according to the chemical condition. Methods: For the analysis of two antioxidants, HPLC UV detector system was used. HPLC was performed using sodium sulfate, acetonitrile(ACN), methanol(MeOH) and measuring absorbance at 240-295 nm. To confirm general pH reaction of two compounds, buffer solution was prepared for the analysis. The dentifrice was titrated by pH so as to examine the change of elapsed time in dentifrice. Linearity of calibration curve of two antioxidants was measured. Results: Each compound showed good linearity at optimized wavelength as well as showing good precision. General pH reaction of two antioxidants was examined. Ascorbic acid showed the highest residue(63.23%) at pH 10 and the lowest residue(2.77%) at pH 4. Tocopherol showed the highest residue(55.70%) at pH 7 and the lowest residue(3.31%) at pH 4. As a result of changing elapsed time of antioxidants in dentifrice by pH, components were remained stably at low temperature($39.2^{\circ}F$) and pH 7. Conclusions: It is necessary to keep dentifrice including ascorbic acid and tocopherol, and non-enzymatic antioxidants at pH 7 and low temperature for improving chemical stability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.313-314
• /
• 2006

Indicating product quantity by real time can be benefit both worker and management. Worker can compare real product quantity with its target and can adjust working speed to match with goal. Therefore, so called JPH equipment developed to indicate target quantity of product. As a main processor PIC16F877 was used and FND display were used to indicate current time, elapsed time, JPH value and target amount of product. Values like JPH and starting time, etc. are can easily be set by $4{\times}4$ numeric keypad and display datum likes target amount of product, current time and elapsed time, etc are displayed on FND by RS232 serial transmit. The operation of JPH equipment are tested and verified through long term test and are proved acting properly on working conditions.

• Fashion & Textile Research Journal
• /
• v.3 no.3
• /
• pp.265-270
• /
• 2001

Korea and Japan, neighboring two nations, have similar cultural background and complicated relations in terms of their culture and constitution. In this study, clothing microclimate and subjective sensation of Korean and Japanese subjects for Hanbok, traditional costumes of Korea, were assessed and investigated differences between them. The results of the study were as follows. For Hanbok, the temperature within clothing at the chest have significant correlations with the variables of race and elapsed time with p<0.001. At the thigh, correlations with elapsed time were significant (p<0.001). For the humidity within clothing at the chest of Hanbok, correlations with variables of race were significant (p<0.001). At the thigh, correlations with race and elapsed time were significant(p<0.001). For Hanbok, Korean group reported 'slightly warm' whereas Japanese group reported 'hot' in the thermal sensation. For the humid sensation, Korean group reported 'neutral' and Japanese group reported 'humid'. For the comfort sensation, Korean group reported 'slightly uncomfortable' and Japanese group reported 'uncomfortable'. Japanese group reported high relation with comfort sensation and humidity of microclimate.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.145-153
• /
• 2007

The purpose of this study is to compare and analyze the phase-by-phase elapsed time, the COG, the body joint angle changes and the angular velocities of each phase of Handspring Salto Forward Piked performed by 4 college gymnasts through 3D movement analysis program. 1. The average elapsed time for each phase was .13sec for Phase 1, .18sec for Phase 2, .4sec for Phase 3, and .3sec for Phase 5. The elapsed time for Phase 1 to Phase 3 handspring was .35sec on average and the elapsed time for Phase 4 to Phase 5 handspring salto forward piked was .7sec on average. And so it showed that the whole elapsed time was 1.44sec. 2. The average horizontal changes of COG were 93.2 cm at E1, 138. 5 cm at E2, 215.7 cm at E3, 369.2 cm at E4, 450.7 cm at E5, and 553.1 cm at E6. The average vertical changes of COG were 83.1 cm at E1, 71.3 cm at E2, 78.9 cm at E3, 93.7 cm at E4, 150.8 cm at E5, and 97.2 cm at E6. 3. The average shoulder joint angles at each phase were 131.6 deg at E1, 153.5 deg at E2, 135.4 deg at E3, 113.4 deg at E4, 39.6 deg at E5, and 67.5 deg at E6. And the average hip joint angles at each phase were 82.2 deg at E1, 60 deg at E2, 101.9 deg at E3, 161.2 deg at E4, 97.7 deg at E5, and 167 deg at E6. 4. The average shoulder joint angular velocities at each phase were 130.9deg/s E1, 73.1 deg/s at E2, -133.9 deg/s at E3, -194.4 deg/s at E4, 29.4 deg/s at E5, and -50.1 deg/s at E6. And the average hip joint angular velocities at each phase were -154.7 deg/s E1, -96.5 deg/s at E2, 495.9 deg/s at E3, 281.5 deg/s at E4, 90.3 deg/s at E5, and 181.7 deg/s at E6. The results shows that, as for the performance of handspring salto forward piked, it is important to move in short time and horizontally from the hop step to the point to place the hands on the floor and jump, and to stretch the hip joints as much as possible after the displacement of the hands and to keep the hip joints stretched and high in the vertical position at the takeoff. And it is also important to bend the shoulder joints and the hip joints fast and spin as much as possible after the takeoff, and to decrease the speed of spinning by bending he shoulder joints and the hip joints quickly after the highest point of COG and make a stable landing.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.649-656
• /
• 2006

The purpose of study is to measure soil erosion quantity for elapsed four years from the fire on forest fired sites of Dong-gu, Daegu. This study was conducted to investigate the characteristics of soil erosion by fire occurrence influencing on the soil erosion were. Also analysis result follows that the relations between soil erosion quantity and rainfall intensity, the slope and elapsed year. The results analysed were as follows: 1. Soil erosion by year of occurrence of forest fire was increased 1.9 to 5.7 times as rainfall intensity was increased by 30 m/hr, and 1.4 to 14.2% as degree of slope was increased by $10^{\circ}$. 2. In the first year of forest fire occurrence, soil erosion was fairly heavy for 10 minutes of initial rainfall of which rainfall intensity was 80 m/hr and degree of slope was $30^{\circ}$. The amount of soil erosion was gradually reduced as elapsed time. From two years after fire, the amount of soil erosion by rainfall intensity and degree of slope was nearly constant. 3. The amount of soil erosion by rainfall intensity and slope in accordance with elapsed time after fire was reduced 28.9 to 94.1% in three years after occurrence of forest fire as compared to the first year of fire. Soil erosion was fairly heavy by rainfall intensity and slope in the first year of fire, but it was gradually reduced from two years after fire. 4. In the analysis on influences of each factors on the amount of soil erosion on forest fired sites, the amount of soil erosion was significant differences in major impacts of each rainfall intensity, degree of slope and elapsed year after fire and interaction of rainfall intensity${\times}$degree of slope and rainfall intensity${\times}$elapsed year after fire, but no differences were observed in interaction of degree of slope${\times}$elapsed year after fire and rainfall intensity${\times}$degree of slope${\times}$elapsed year after fire. Rainfall intensity was the most affecting factor on the amount of soil erosion and followed by degree of slope and elapsed year after fire. 5. For correlation between soil erosion and affecting three factors, soil erosion showed significant positive relation with rainfall intensity and degree of slope at I % level, and significant negative relation with elapsed year after fire at 1 % level. 6. As a result of regression of affecting three factors on soil erosion. rainfall intensity was most significant impact factor in explaining the amount of soil erosion on forest fired sites, followed by degree of slope and elapsed year after forest fire. 7. The formula for estimating soil erosion using rainfall intensity, degree of slope and elapsed year after forest fire occurrence was made. S.E = 0.092R.I + 0.211D.S - 0.942E.Y(S.E : Soil erosion, R.I : Rainfall intensity, D.S : Degree of slope, E.Y : Elapsed year after forest fire occurrence)

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.3
• /
• pp.479-498
• /
• 2016

Time is important in children's lives since their preschool years. However, previous studies indicate that many children struggle with the acquisition of time concepts. Also teachers do not know how to help them. This study aims to investigate elementary school students' understanding about time and induce its educational implications. To do this, about 130 children from first to fifth grades were tested for their ability to recognize(read and record) the analogue and digital times and to solve elapsed-time problems. The results showed that even first graders were able to read and record the minute times on digital clocks. And second graders were able to read and record the minute times on analogue clocks. Therefore, the ability to recognize analogue times was mastered by second grade. In case of the elapsed-time problems, there was statistically significant difference according to school years or types of problems. Students were successful in solving simple problems. However, the problems that include regrouping hour and minute remained difficult even for the older children. Based on these results, we made a few suggestions for teaching practice about time.

• Journal of Korean Public Health Nursing
• /
• v.17 no.1
• /
• pp.83-95
• /
• 2003

The purpose of this study was to provide basic data for nursing interventions to promote rehabilitation motivation by identifying the influencing factors of motivating rehabilitation intention in patients with spinal cord injury. The data were collected using self-reported questionnaires and questionnaires by postal mail services, from September 1 through the October 6, 2002. A total of 148 questionnaires were completed and returned. The instrument developed by Han, Hye Sook(2001) was used to measure the rehabilitation motivation, and depression, family support, participation of self-help group, self-esteem, and self-efficacy were measured to test the variables influencing the rehabilitation motivation. Using SPSS WIN 10.0, descriptive statistics, t-test, one-way ANOVA. Turkey inspection, Pearson's correlation coefficient, and stepwise multiple regression analysis was conducted. The results of the study are as follows: The rehabilitation motivation score ranged from 30 to 100, and the average was $76.78(\pm12.40)$. In terms of the types of motivation, mean task-oriented motivation score was $23.28(\pm3.39)$, change-oriented motivation $22.25(pm3.16)$, obligatory motivation $9.90(\pm2.02)$, external motivation $9.85(\pm1.89)$, and mean amotivation score was $11.50(\pm1.94)$. The scores for the rehabilitation motivation was significantly associated with the time elapsed since injury, economic status, and the degrees of disability. Significant correlations were found between the rehabilitation motivation and the time elapsed since injury(r=-0.222, p=0.007), self-efficacy(r=0.204, p=0.013), depression(r=-0.210, p=0.010). and the economic status(r=-0.189, p=0.022). The variables that can predict the rehabilitation motivation included the time elapsed since injury, and self-efficacy. These variables accounted for $12.8\%$ of the variance of the rehabilitation motivation. In conclusion, the factors influencing the rehabilitation motivation in patients with spinal cord injury were found to be the time elapsed since injury, self-efficacy, depression, and the economic status of the patient, Accordingly, nursing interventions which could alleviate patients' depression and enhance self-efficacy should be designed to motivate rehabilitation. Before planning nursing interventions for patients with spinal cord injury, needs assessment should be conducted including the assessment of patients' economic status and time elapsed since injury.

• Korean Journal of Poultry Science
• /
• v.21 no.3
• /
• pp.157-168
• /
• 1994

This study was carried out to elucidate the time course variation of vitamin $D_{3}$ (V$D_{3}$) and 25-hydroxyvitamin $D_{3}$ [25(OH)$D_{3}$] contents in the liver and skeleton of 3-wk old broiler chicks when treated with different UV irradiation procedure. Day-old Hubbard chicks were fed vitamin D deficient diet for 3 wk and exposed to medium wave ultraviolet(UVB) light with different irradiation procedures. Procedure I was 30 min continuous irradiation(O.204 mJ /$cm^{2}$) and Procedure II was three seperate 10 min irradiation with 12 h intervals, and Procedure III was three seperate 10 min irradiation with 24 h intervals. The liver and skeleton samples were collected at 10 different times between 0000~2400 h after the last irradiation. The V$D_{3}$ and 25(OH)$D_{3}$ fractions wereseparated by Sep-Pak silica cartridge and the concentrations were determined by normal phase HPLC. The mean content of V$D_{3}$ in the liver of the birds treated by Procedure II was 6.68 ng /g, which was higher than 5.60 and 5.30 ng /g from Procedure I and Ill, respectively(P<.O5). With regard to the effect of elapsed time after UVB irradiation on the V$D_{3}$ concentration of the liver, 96 h treatment showed the highest value(13.08 ng/g)(P<.05). There was a significant(P$D_{3}$ were significantly(P$D_{3}$ in the skeleton of tibia and femur, there were no significant differences among Procedure I, II and III, but significant differences were found among those from various elapsed time after irradiation, The highest value was shown at 96 h(O.99 ng /g) treatment, and interaction between irradiation procedure and elapsed time was not significant. With regard to the mean content of 25(OH)$D_{3}$ in bone, the Procedure II(18.79 ng /g) and III(17.73 ng /g) showed higher values than Procedure I did (P<.05), and the 12 h elapsed time showed the highest value(31.17 ng /g) among 10 treatments (P<.05), however, there was no significant interaction between exposing procedure and elapsed time. In conclusion, the Procedure II would he more desirable than Procedure I or III to produce more V$D_{3}$ and 25(OH)$D_{3}$ in the liver and skeleton of birds by exposing to the UVB light. Also, it was verified that 25(OH)$D_{3}$ increases more quickly than V$D_{3}$ in both tissues tested and is utilized more quickly to recover from the rickets of chicks.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1261-1267
• /
• 1997

Four kids of powder admixtures(A, B, C, D) based on anhydrite were manufactured by mixing at a fixed rate of II-anhydrite, fly ash and active silica as an industrial by-product. Fluidity properties of cement paste such as mini-slump, apparent viscosity with elapsed time, as well as setting time of cement pastes of these admixtures substituted up to 11wt% of cement were compared to those of cement paste(SS) substisuted by marketed high-strength powder admixture(S). Among these powder admixtures, the fluidity of cement pastes(PA, PC) substituted by A and C powder admixtures manufactured from II-anhydrite and fly ash had an excellent property than that of cement paste substituted by marketed powder admixture and also a good fluidity-retention effect with elapsed time by adding of superplasticizer. The setting time of cement paste substituted by powder admixtures based on anhydrite slightly retarded than that of cement paste substituted by marketed powder admixture.