• 제목/요약/키워드: time clock

검색결과 821건 처리시간 0.026초

전압 제어형 카오스회로의 온도특성 해석 (Temperature Analysis of the Voltage Contolled Chaotic Circuit)

  • 박용수;주계초;송한정
    • 한국산학기술학회논문지
    • /
    • 제14권8호
    • /
    • pp.3976-3982
    • /
    • 2013
  • 본 논문에서는 전압 제어형 카오스 신호 발생회로를 설계하고, 온도변화에 따른 특성을 해석 하였다. 제안하는 CMOS 회로로 이루어지며, 카오스 특성의 전압 제어형 오실레이터의 온도 변화에 따른 특성해석을 실시하였다. 제안하는 회로는 2상 클럭의 샘플앤드회로 3개의 MOS 소자로 이루어지는 비선형 함수 블록과 소스 팔로워로 이루어지는 레벨 쉬프터로 구성된다. SPICE 모의실험을 통하여 온도변화에 따른, 비선형함수의 전달함수 변화를 통하여, 분기도 특성, 주파수 특성 등의 카오스 다이나믹스가 변화됨변화됨을 확인 하였다. 또한 $25^{\circ}C$ 의 온도 조건에서, 제어전압 1.2 V-2.3 V 범위에서, 카오스 신호가 생성됨을 확인하였다.

VDL Mode-2에 적용 가능한 버스트 모드 심벌 타이밍 복원기 (Burst Mode Symbol Timing Recovery for VDL Mode-2)

  • 김종만;최승덕;은창수
    • 한국항행학회논문지
    • /
    • 제13권3호
    • /
    • pp.337-343
    • /
    • 2009
  • 본 논문에서는 D8PSK 변조 방식을 이용하는 VDL Mode-2 수신기에 적용 가능한 버스트 모드 심벌 타이밍 복원기를 제안하고 성능 분석과 연동실험을 실시하였다. IIR 루프필터를 사용하여 심볼 타이밍 에러를 최소화 하는 방식은 수렴 속도가 늦기 때문에 버스트 모드에 적용하기 곤란하다. 즉 빠른 수렴 특성이 중요시 된다. 본 논문에서 제안한 방식은 프리앰블을 이용하여 초기 동기가 이루어진 후 최대 심벌 전력을 갖는 방향으로 한 샘플 빠르게 또는 한 샘플 느리게 샘플 클럭을 이동하여 최적의 심벌을 취하는 방식이다. 제안된 방식을 적용한 수신기와 호주 ADS사 송신 장비와 연동 시험한 결과 100 ppm 이상에서도 잘 동작함을 확인하였다.

  • PDF

값 예측 오류를 위한 순차적이고 선택적인 복구 방식 (Sequential and Selective Recovery Mechanism for Value Misprediction)

  • 이상정;전병찬
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제31권1_2호
    • /
    • pp.67-77
    • /
    • 2004
  • 고성능 슈퍼스칼라 프로세서에서 값 예측(value prediction) 방식은 명령의 결과 값을 미리 예측하고, 이 후 데이타 종속 관계가 있는 명령들에게 값을 조기에 공급함으로써 이들 명령들을 모험적으로 실행하여 성능을 향상시키는 방식이다. 값 예측으로 성능을 향상시키기 위해서는 예측 실패 시에 효율적으로 복구하는 과정이 필수적이다. 본 논문에서는 값 예측 실패 시에 잘못 예측된 값을 사용하여 모험적으로 수행된 명령들만을 순차적으로 취소하고 복구한 후에 재이슈하는 값 예측 실패 복구 메커니즘(value misprediction recovery mechanism)을 제안한다. 제안된 복구 방식은 한번에 모든 종속명령들을 검색하지 않음으로써 파이프라인을 정지시키지 않는다. 즉, 파이프라인이 진행되는 순서에 따라 순차적으로 값 예측이 틀린 종속명령만을 선택적으로 취소하고 재이슈하여 불필요한 취소와 재이슈를 줄임으로써 값 예측 실패 시에 손실을 줄인다.

멀티미디어 데이타 처리를 위한 그래픽 프로세서 설계 (Design of a Graphic Processor for Multimedia Data Processing)

  • 고익상;한우종;선우명동
    • 전자공학회논문지C
    • /
    • 제36C권10호
    • /
    • pp.56-65
    • /
    • 1999
  • 본 논문은 그래픽 프로세서(Graphic Coprocessor: GCP)의 설계 및 구현에 대해 기술한다. 설계된 그래픽 프로세서는 멀티미디어 서버용 프로세서의 그래픽 전용 프로세서로 사용 가능하다. GCP 명령어 집합은 멀티미디어 데이타의 병렬성을 이용하기 쉬운 SIMD 및 Superscalar 등의 병렬 아키텍쳐 개념을 적용하여 설계하였다. 설계된 GCP는 4개의 주 프로세서에 의해 공유되는 형태이며 공유에 따른 명령어의 병목현상을 해결하기 위한 스케줄러와 연산을 위한 4개의 기능 유니트를 내장하고 있다. 최대 4개 명령어의 동시 수행이 가능한 GCP는 Verilog HDL로 모델링하고 논리 합성하였다 약 56,000개의 게이트로 구성되는 GCP는 SOG 라이브러리의 제약으로 인하여 30 ㎒로 동작하며 CIF 영상 규격에 대해 초당 63 프레임의 DCT 연산 및 초당 21 프레임의 FBMA 연산을 수행 할 수 있다.

  • PDF

Effects of Weather Conditions on Sunburn in Stalk Curing of Burley Tobacco

  • Bae, Seong Kook;Jo, Chun Joon
    • 한국연초학회지
    • /
    • 제22권2호
    • /
    • pp.138-142
    • /
    • 2000
  • The effects of stalk cutting time and environmental factors such as air temperature, leaf temperature, solar radiation and leaf moisture content during harvesting and curing in burley tobacco(Nicotiana tabacum L.) on weight loss of fresh stalks and sunburning in leaves were investigated at Chonju Experiment Station, Korea Ginseng & Tobacco Research Institute in 1996 and 1997. Twelve to fifteen percent of the fresh weight was lost in 3 to 4 hours after stalk-cutting, and sunburned leaves could be observed in case of stalk cutting between 11:00 and 15:00 O'clock on a clear sunny day, when the air temperature was 34 to 35$^{\circ}C$, leaf temperature 52 to 54$^{\circ}C$, and solar radiation 700 to 940 w/$m^2$. The leaves exposed to this weather condition were sunburned within 1 hour after stalk cutting. But low temperature (below $25^{\circ}C$) with high solar radiation(above 700w/m2) or high temperature(above 3$0^{\circ}C$) with low solar radiation (below 600w$m^2$) did not induce the sunburn damage in leaves. As the leaf temperature and leaf moisture content were higher, the sunburned leaves increased. The leaves at the higher stalk position were more easily sunburned than those at the lower. This result indicates that the immature leaves with higher chlorophyll content might be more susceptible to sunburning.

  • PDF

유비쿼터스 컴퓨팅 보안을 위한 경량 블록 암호 구현 (Implementation of Lightweight Block Cipher for Ubiquitous Computing Security)

  • 김성환;김동성;송영덕;박종서
    • 융합보안논문지
    • /
    • 제5권3호
    • /
    • pp.23-32
    • /
    • 2005
  • 본 논문에서는 유비쿼터스 컴퓨팅 보안을 위한 128비트 Reversible Cellular Automata(RCA)기반 경량 블록 암호를 설계하고 구현한다. 유비쿼터스 컴퓨팅이 요구하는 하드웨어 제약조건을 충족하기 위하여 높은 임의성을 제공하는 Cellular Automata를 기반으로 블록구조를 설계하였다. 구현된 블록 암호기법은 암호화 과정동안 704 클럭 사이클로 동작하고 2,874 게이트수를 보였다. 구현 결과 기존의 AES나 NTRU보다 처리속도가 31% 향상되었고, gate수는 20%만큼 절감되었다. 차분 분석(Differential Cryptanalysis)과 Strict Avalanche Criterion(SAC)을 수행함으로써 구현된 블록 암호 알고리즘의 안정성을 검증하였다.

  • PDF

PDA를 위한 32비트 RISC 코어의 설계 (A design of 32-bit RISC core for PDA)

  • 곽승호;최병윤;이문기
    • 한국통신학회논문지
    • /
    • 제22권10호
    • /
    • pp.2136-2149
    • /
    • 1997
  • 본 논문에서는 PDA나 PCS와 같은 내장형 응용을 위한 RISC 코어를 설계하였다. 이 RISC 프로세서는 내장형 응용의 중요한 특성인 빠른 인터럽트 핸들링, 빠른 컨텍스트 스위칭과 저전력 소모를 지원한다. 또한 조건부로 수행 가능한 명령어 군과 블럭 전송 명령 그리고 곱셈 명령을 이용하여 프로세서의 성능을 향상시켰다. 3단 파이프라인을 이용하였으며 2-phase 클럭을 사용한 단일 사이클 명령어 수행이 가능하다. 이 프로세서는 $5.0{\times}5.0mm^2$의 면적에 약 88,000개의 트랜지스터가 집적되었으며 $0.6{\mu}\textrm{m}$ 삼중 금속 단일 폴리 공정을 이용하여 레이아웃 되었다. 최대 동작 주파수는 40MHz이며 예상 전력 소비는 179mW이다.

  • PDF

네트워크 기반 자율이동로봇의 장애물 회피 알고리즘 개발 (Obstacle Avoidance Algorithm Development for Network-Based Autonomous Mobile Robots)

  • 손수경;김주민;김홍렬;김대원;양광웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 D
    • /
    • pp.2435-2437
    • /
    • 2004
  • In this paper, an obstacle avoidance algorithm is proposed for a network-based robot considering network delay by distribution. The proposed algorithm is based on the VFH(Vector Field Histogram) algorithm, and for the network-based robot system, in which it is assumed robot localization information is transmitted through network communication. In this paper, target vector for the VFH algorithm is estimated through the robot localization information and the measurement of its delay by distribution. The delay measurement is performed by time-stamp method. To synchronize all local clocks of the nodes distributed on the network, a global clock synchronization method is adopted. With the delay measurement, the robot localization estimation is performed by calculating the kinematics of the robot. The validation of the proposed algorithm is performed through the performance comparison of the obstacle avoidance between the proposed algorithm and the existing VFH algorithm on the network-based autonomous mobile robot.

  • PDF

자가학습 가능한 SVM 기반 가스 분류기의 설계 (Design of SVM-Based Gas Classifier with Self-Learning Capability)

  • 정우재;정윤호
    • 전기전자학회논문지
    • /
    • 제23권4호
    • /
    • pp.1400-1407
    • /
    • 2019
  • 본 논문은 실시간 자가학습과 분류 기능을 모두 지원하는 support vector machine (SVM) 기반 가스 분류기의 하드웨어 구조 설계 및 구현 결과를 제시한다. 제안된 가스 분류기는 학습 알고리즘으로 modified sequential minimal optimization(MSMO)을 사용하였고, 학습과 분류 기능을 공유구조를 사용하여 설계함으로써 기존 논문 대비 하드웨어 면적을 35% 감소시켰다. 설계된 가스 분류기는 Xilinx Zynq UltraScale+ FPGA를 사용하여 구현 및 검증되었고, 108MHz의 동작 주파수에서 3,337개의 CLB LUTs로 구현 가능함을 확인하였다.

페르소나와 아니무스를 표현한 한국 창작무용의상 디자인개발 - '미친 치마 꼴라쥬'를 중심으로 - (Design Development of Korean Creative Dance Wear Expressing Persona and Animus - Focusing on 'Crazy Collage Skirts' -)

  • 김흥경;김선화
    • 복식
    • /
    • 제58권7호
    • /
    • pp.119-132
    • /
    • 2008
  • This study intended to develop and produce a modern form of fashion design for the Korean creative dance performance, 'Crazy Skirt Collage', which expressed conflict between internal ego and a persona in a woman. The qualitative method was used to analyze literature review, internet search and visual data of historically important cases related to the theme. Based on the analysis, the fashion design of the dance performanre by Hwang Hee-Yeon that was actually staged on Towol Theater, one of the Seoul Arts Center, was produced. The results wire as follows; First, the study confirmed a change of persona that revealed a female's animus strongly as it moved into the modern time. Second, the female's persona was expressed through long skirts, slips, dress shoes, handbags, military shoes, dresses with long zippers, trousers, wedding dresses and Korean full skirts during the performance, while the female's animus through male coats, panties, big bags and clock. In conclusion, it is necessary to study new expressive methods, that is, dance clothes using advanced equipment such as lights, videos or other variety of materials. It is also important to understand aesthetics of modern women's ordinary lives and to adapt ordinary clothes to dance clothes in various methods in order to express their modern lives appropriately through Korean creative dance.