• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.215-220
• /
• 2005

Nowadays, various speech processing systems are being introduced in the fields of robotics. However, real-time processing and high performances are required to properly implement speech processing system for the autonomous robots. Achieving these goals requires advanced hardware techniques including intelligent software algorithms. For example, we need nonlinear amplifier boards which are able to adjust the compression radio (CR) via computer programming. And the necessity for noise reduction, double-buffering on EPLD (Erasable programmable logic device), simultaneous multi-channel AD conversion, distant sound localization will be explained in this paper. These ideas can be used to improve distant and omni-directional speech recognition. This speech processing system, based on embedded Linux system, is supposed to be mounted on the new home service robot, which is being developed at KIST (Korea Institute of Science and Technology)

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.59-62
• /
• 2002

Before a developed digital Power System Stabilizer(PSS) is installed to real power system, an efficient trial test for installing PSS is needed. In this paper, the performance of developed digital PSS for a single hydro-turbine generator and infinite bus system has been investigated using Real Time Digital Simulator(RTDS) in order to install PSS to real power system practically. The test system was composed of RTDS, three phase voltage/current amplifier and the PSS and the test scheme provided a very efficient way to verify the design and control performance of a PSS to be applied to real power system. The trial installation test through AVR 3% step test and three fault analysis may be guaranteed to install PSS to real power system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.457-461
• /
• 1988

In this study an one-board micom controlled precision temperature control system has been developed. The digital temperature control system is consisted of an one-board micom as digital controller, a 12-bit A/D and D/A converter, a power amplifier, a NTC thermister, a preamplfier and a heat chamber. An operating control program for the control system was written in Z80 machine language. A Dual-PID predictor control algorithm was proposed. Experments were conducted with different sampling time and limitted error value. As a result, the temperature in a heat chamber can be well controlled within +- 0.2 .deg.C when the sampling time was applied to 10 sec and the limitted error value +- 0.5 .deg.C under the dual-PID predictor control algorithm. By means of one-board micom overall system has been reduced in size and volume, thus the system becomes compact and less expensive.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2002

We propose a novel sensing circuit for 2T-2MTJ MRAM that can be used for high speed synchronous operation. Proposed bit-line sense amplifier detects small voltage difference in bit-lines and develops it into rail-to-rail swing while maintaining small voltage difference on TMR cells. It is small enough to fit into each column that the whole data array on selected word line are activated as in DRAMs for high-speed read-out by changing column addresses only. We designed a 256Kb read-only MRAM in a $0.35\mu\textrm{m}$ logic technology to verify the new sensing scheme. Simulation result shows a 25ns RAS access time and a cycle time shorter than 10 ns.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1089-1094
• /
• 2016

In order to establish the robust controller design technique of series wound motor driver system. This paper proposes a method of Bang-Bang controller using a series wound motor driver system under improperly variable load. A Bang-Bang controller structure is simpler than the structure of PID plus Bang-Bang controller. This paper shows that a general 8 bits microprocessor is used efficiently implementing such an algorithm. The calculation time of software is extremely small when compared with conventional PID plus Bang-Bang controller. Both nonlinear operating characteristics of digital switching elements and describing function methods are used for the analysis and synthesis. Real time implementation of Bang-Bang controller is achieved. Concept design strategy of the control and PWM waveform generation algorithms are presented in the paper.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.35-38
• /
• 2006

Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.503-512
• /
• 2001

A new adaptation algorithm for the digital predistorter is presented. The proposed technique employs the real-time transmitted signals through HPA for the table update. Hence the proposed algorithm does not depend on modulation format and the signal transmission of HPA is not affected during the adaptation process. The experimental results are presented to verify the proposed method and we obtained about 8.4 dB of ACPR improvement.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.178-180
• /
• 2003

This paper proposes a real-time simulator that can simulate dynamic changes of a substation for intelligent SCADA system. The simulator consists of RTDS, voltage and current amplifier, IED, and RTU. The simulator is verified by system implementation and event simulation of a substation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.253-262
• /
• 2003

In this paper, the interference cancellation system, which is used to cancel the feedback signal in the wireless communication system with the same frequency, is studied. The time varying feedback signal generated from transmitter antenna to receiver antenna reduces the performance of the receiver system. the interference cancellation system using adaptive feedback method(AF-ICS) is suggested to prevent the oscillation of the receiver system and maintain the maximum output power of the power amplifier by the reduction of time-varying feedback signal and also this paper conforms that the oscillation disappears from the output signal by cancellation of the feedback signal and the total output power is satisfied the system specification.