• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.550-552
• /
• 2008

A small hall thruster with a thrust of about 10 mN and a specific impulse of about 1500 s is being developed with an intent to control or maintain the orbits of small satellites. The total mass, consumed electric power and efficiency of the thruster are approximately 10 kg, 300W and 30%, respectively. The thruster system consists of a hall thruster with a cylindrical cross section, a power processing unit and a Xenon(Xe) gas feed system. Laboratory examination of the thruster performance finds that the thruster meets the design specification.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.257-261
• /
• 2001

Nonlinear pulse width modulation (PWM) controlled system is considered to achieve control performance of thruster controlled spacecraft. The actual PWM controlled motions occur, very closely, around the average model trajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.295-296
• /
• 2012

In Korea, study of monopropellant thruster have been started from 1990s by KARI (Korea Aerospace Research Institute). 5N hydrazine thruster that is a first Koreanized hydrazine thruster, have been used as flight model for several satellite. In parallel, in order to retain core technology for monopropellant thruster, catalyst and test facility development have been carried out and successfully completed. On the basis of these technology, KARI is performing development of 1N/200N hydrazine thruster and basic research of green propellant thruster.

• 한국항공우주학회지
• /
• 제37권5호
• /
• pp.490-495
• /
• 2009

소형 인공위성의 궤도천이 및 보정을 위하여 추력이 약 10 mN이고 비추력이 1500 s인 홀 방식 전기추력기를 설계하였다. 개발된 추력기는 홀 방식의 추력부, 전력공급부 및 연료 공급부로 구성되어 있고, 무게, 소모전력 및 효율은 각각 10 kg, 300 W 및 30%정도이다. 개발된 추력기 시스템에 대한 간략한 소개를 홀 방식의 추력기를 선택하게 된 배경해석과 함께 기술하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.468-472
• /
• 2003

MRE-1 dual thruster module(DTM) which will be installed to the present under development KOMPSAT(Korea Multi-Purpose Satellite) can provide reliable and cost-effective means of propulsive control for attitude and maneuvering control system. Thruster heat shield, one of the main components of DTM, is designed to intercept the radiative heat exchange between thruster and satellite during firing. The inside diameter of the current configuration will be decreased a little compared with that of the previous one due to manufacturing method change. Therefore, the possibility of interference between thruster and heat shield due to configuration change is investigated through structural analysis and their results are described in this paper.

• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.72-77
• /
• 2016

In this study, effects of thurster axis tilting angle on the thruster-hull interaction and propulsion performance in a dynamic positioning system of offshore plant are numerically investigated. Straight and 7-degree tilted downward thruster models as a form of ducted propeller are considered. For numerical simulations, Reynolds averaged Navier-Stokes equations with SST turbulence model are solved by using STAR-CCM+. Results show that thruster-hull interaction is reduced in 7-degree tilted thruster model with lower vortex strength between thruster and hull bottom, although the propulsion performance does not have noticeable difference in a bollard condition.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.297-315
• /
• 2011

New applications of streamlined Autonomous Underwater Vehicles require an AUV capable of completing missions with both high-speed straight-line runs and slow maneuvers or station keeping tasks. At low, or zero, forward speeds, the AUV's control surfaces become ineffective. To improve an AUV's low speed maneuverability, while maintaining a low drag profile, through-body tunnel thrusters have become a popular addition to modern AUV systems. The effect of forward vehicle motion and sideslip on these types of thrusters is not well understood. In order to characterize these effects and to adapt existing tunnel thruster models to include them, an experimental system was constructed. This system includes a transverse tunnel thruster mounted in a streamlined AUV. A 6-axis load cell mounted internally was used to measure the thrust directly. The AUV was mounted in Memorial University of Newfoundland's tow tank, and several tests were run to characterize the effect of vehicle motion on the transient and steady state thruster performance. Finally, a thruster model was modified to include these effects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.461-461
• /
• 2000

Nonlinear pulse width modulation(PWM) controlled system is considered to achieve control performance of thruster-controlled spacecraft. The actual PWM controlled motions occurs, very closely, around the average model rajectory. Furthermore nonlinear PWM controller design can be directly applied to thruster controlled spacecraft to determine thruster on-time. Sliding mode control for attitude tracking of three-axis thruster-controlled spacecraft is presented. Simulation results are shown which use modified Rodrigues parameters and sliding mode control law to achieve attitude tracking of a three-axis spacecraft with thrusters.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1044-1055
• /
• 2015

DPCap analysis can assist in determining the maximum environmental forces the DP system can counteract for a given heading. DPCap analysis results are highly affected by the thrust forces provided by the thrust system which consists of several kinds of thrusters. The thrust forces and moment are determined by the maximum thrust of the thrusters as well as the thruster configuration. In this paper, a novel local optimization of thruster configuration based on a synthesized positioning capability criterion is proposed. The combination of the discrete locations of the thrusters forms the thruster configuration and is the input, and the synthesized positioning capability is the output. The quantified synthesized positioning capability of the corresponding thruster configuration can be generated as the output. The optimal thruster configuration is the one which makes the vessel has the best positioning capability. A software program was developed based on the present study. A local optimization of thruster configuration for a supply vessel was performed to demonstrate the effectiveness and efficiency of the program. Even though the program cannot find the global optimal thruster configuration, its high efficiency makes it essentially practical in an engineering point. It may be used as a marine research tool and give guidance to the designer of the thrust system.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.1965-1971
• /
• 2010

선박 추진제어플랫폼은 안전한 항해를 위한 추진기관으로 사용되는 선박주기엔진의 원격운전 및 제어를 담당하는 시스템이다. 본 시스템은 안전하고 신뢰성 있는 운항을 보장하는 시스템이며, 원격제어 기술이 요구되는 시스템이다. 본 연구에서는 해당 시스템의 국산화를 위한 연구의 일환으로서 선박 추진제어시스템의 속도전달장치의 구현에 대해 연구하며, 시스템 분석과 설계 및 구현을 통해 해당 분야의 노하우와 원천기술을 확보하고 추후 추진 제어플랫폼의 통합화를 위한 기반기술을 확보하고자 한다.