• Smart Structures and Systems
• /
• 제31권5호
• /
• pp.517-529
• /
• 2023

Using a device composed of two lateral pressure plates (LPPs) and a steel reinforcement bar to apply horizontal pressure on slope surfaces, a newly developed prestress-reinforced embankment (PRE) is proposed, to which can be adopted in strengthening railway subgrades. In this study, an analytical model, which is available of calculating additional confining stress (σ_H) at any point in a PRE, was established based on the theory of elasticity. In addition, to verify the proposed analytical model, three dimensional (3D) finite element analyses were conducted and the feasibility in application was also identified and discussed. In order to study the performance of the PRE, the propagation of σ_H in a PRE was analyzed and discussed based on the analytical model. For the aim of convenience in application, calculation charts were developed in terms of three dimensionless parameters, and they can be used to accurately and efficiently predict the σ_H in a PRE regardless of the embankment slope ratio and LPP side length ratio. Finally, the potential applications of the proposed analytical model were discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.367-375
• /
• 2014

삼차원 솔리드 유한요소 방법을 이용한 목재 거동 해석을 보다 효율적으로 손쉽게 활용하기 위하여, 이에 필요한 목재재료모델 생성 방법을 개발하였다. 2단선형 탄소성이방성 이론에 근거하여 목재의 주요 세 방향 즉, 섬유, 방사 및 접선방향의 구성방정식을 정의하였다. 목재재료상수 결정의 단순화를 위하여 방사방향과 접선방향의 특성을 섬유직각 방향으로 통합하고, 요구되는 총 27개의 재료입력상수를 방향별 탄성계수와 항복응력, 그리고 프와송 비를 포함하는 6개의 독립상수로 단순화하였다. 개발된 목재재료모델을 이용하여 북미 더글라스 퍼 압축시험에 대한 삼차원 유한요소 모델을 개발하고 주요 세 방향에 대한 실험 측정치들과 시뮬레이션 결과를 비교하였다. 성공적인 모델해석 결과를 얻었으며, 이를 바탕으로 향후 진척되어야 할 연구개발 방향과 예상되는 문제점들을 논의하였다.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.711-731
• /
• 2020

This paper deals with free vibration of FG sandwich annular sector plates on Pasternak elastic foundation with different boundary conditions, based on the three-dimensional theory of elasticity. The plates with simply supported radial edges and arbitrary boundary conditions on their circular edges are considered. The influence of carbon nanotubes (CNTs) waviness, aspect ratio, internal pores and graphene platelets (GPLs) on the vibrational behavior of functionally graded nanocomposite sandwich plates is investigated in this research work. The distributions of CNTs are considered functionally graded (FG) or uniform along the thickness of upper and bottom layers of the sandwich sectorial plates and their mechanical properties are estimated by an extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. The core of structure is porous and the internal pores and graphene platelets (GPLs) are distributed in the matrix of core either uniformly or non-uniformly according to three different patterns. The elastic properties of the nanocomposite are obtained by employing Halpin-Tsai micromechanics model. A semi-analytic approach composed of 2D-Generalized Differential Quadrature Method (2D-GDQM) and series solution is adopted to solve the equations of motion. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. Some new results for the natural frequencies of the plate are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The new results can be used as benchmark solutions for future researches.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.163-179
• /
• 2017

The axisymmetric buckling delamination of the Piezoelectric/Metal/Piezoelectric (PZT/Metal/PZT) sandwich circular plate with interface penny-shaped cracks is investigated. The case is considered where open-circuit conditions with respect to the electrical displacement on the upper and lower surfaces, and short-circuit conditions with respect to the electrical potential on the lateral surface of the face layers are satisfied. It is assumed that the edge surfaces of the cracks have an infinitesimal rotationally symmetric initial imperfection and the development of this imperfection with rotationally symmetric compressive forces acting on the lateral surface of the plate is studied by employing the exact geometrically non-linear field equations and relations of electro-elasticity for piezoelectric materials. The sought values are presented in the power series form with respect to the small parameter which characterizes the degree of the initial imperfection. The zeroth and first approximations are used for investigation of stability loss and buckling delamination problems. It is established that the equations and relations related to the first approximation coincide with the corresponding ones of the three-dimensional linearized theory of stability of electro-elasticity for piezoelectric materials. The quantities related to the zeroth approximation are determined analytically, however the quantities related to the first approximation are determined numerically by employing Finite Element Method (FEM). Numerical results on the critical radial stresses acting in the layers of the plate are presented and discussed. In particular, it is established that the piezoelectricity of the face layer material causes an increase (a decrease) in the values of the critical compressive stress acting in the face (core) layer.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.362-369
• /
• 2000

Via screw theory, a vibration mode can be geometrically interpreted as a pure rotation about the vibration center in a plane and as a twisting motion on a screw in a three dimensional space. In thi s paper, applying the conditions that can be used to diagonalize the stiffness matrix by a parallel axis congruence transformation, the vibration modes and frequency response of an elastically suspended optical disc drive have been analyzed. It is first shown that the system has one plane of symmetry, which enables one to decouple the complicated vibration modes into two sets of modes independent of each other. Having obtained the analytical solutions for the axes of vibrations, the frequency response for a given applied input force has been demonstrated. Most importantly, it has been explained that this research result could be used in the synthesis process of a linear vibration system in order to improve the frequency response.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.663-686
• /
• 2014

This paper deals with free vibration analysis of bidirectional functionally graded annular plates resting on a two-parameter elastic foundation. The formulations are based on the three-dimensional elasticity theory. This study presents a novel 2-D six-parameter power-law distribution for ceramic volume fraction of 2-D functionally graded materials that gives designers a powerful tool for flexible designing of structures under multi-functional requirements. Various material profiles along the thickness and in the in-plane directions are illustrated by using the 2-D power-law distribution. The effective material properties at a point are determined in terms of the local volume fractions and the material properties by the Mori-Tanaka scheme. The 2-D differential quadrature method as an efficient and accurate numerical tool is used to discretize the governing equations and to implement the boundary conditions. The fast rate of convergence of the method is shown and the results are compared against existing results in literature. Some new results for natural frequencies of the plates are prepared, which include the effects of elastic coefficients of foundation, boundary conditions, material and geometrical parameters. The interesting results indicate that a graded ceramic volume fraction in two directions has a higher capability to reduce the natural frequency than conventional 1-D functionally graded materials.

• 한국전산구조공학회논문집
• /
• 제25권6호
• /
• pp.505-512
• /
• 2012

본 논문에서는 일차전단변형 평판 이론(FSDT)의 개선을 통한 복합재료 적층평판의 효율적 열응력 해석 기법을 제안한다. 횡방향 응력 성분에 대해서만 변분을 취하는 혼합변분이론(Mixed variational theorem)을 이용하여 횡방향 변형에너지를 개선하였다. 가정된 횡방향 전단응력 성분들은 효율적 고차이론으로부터 구하였으며, 면내 변위 성분들은 일차적층평판 이론의 변위장을 사용하였다. 또한, 열응력 해석에 있어서 횡방향 수직 변형을 효과적으로 고려하기 위해서 횡방향 수직 변위를 두께방향에 대하여 포물선으로 가정하였다. 이 과정을 통하여 얻어진 전단변형 에너지를 본 논문에서는 횡방향 수직 변형이 고려된 개선된 일차전단변형이론(EFSDTM_TN)이라고 명명하였다. 제안된 EFSDTM_TN은 복합재료 적층평판의 열탄성 거동을 해석함에 있어서 횡방향 수직 변형이 고려된 일차전단변형 평판 이론(FSDT_TN)과 비슷한 수준의 계산만을 필요로 하며, 동시에 후처리 과정을 통하여 열변형 및 열응력의 두께방향 분포를 정확하게 예측할 수 있도록 개선하였다. 계산된 결과는 FSDT_TN, 3차원 탄성해 등의 결과와 비교하여 검증하였다.

• 대한기계학회논문집A
• /
• 제40권4호
• /
• pp.381-387
• /
• 2016

본 논문에서는 생브낭의 원리가 근본적으로 구조물의 거동 예측에 잠재적으로 적용되어 있다는 점에 착안하여, 응력해석에 국한되어 있던 방법론을 자유진동 및 좌굴 문제 등에 적용하여 고전 보 이론의 정확도를 고차이론 수준으로 개선한다. 먼저 생브낭의 원리를 소개하고, 고전 보 이론에 의한 자유진동 그리고 좌굴해석 정식화를 진행하였다. 고전 보 이론의 변위장에 워핑함수와 섭동항을 추가하고, 합응력 등가(즉, 생브낭의 원리)를 적용하여 섭동항을 찾는다. 여기서 워핑함수들은 응력 평형방정식을 통하여 계산하였으며, 이 워핑함수들은 추가된 섭동항에 의하여 보의 응력 평형을 만족하게 된다. 제안된 방법론을 외팔보와 단순지지 보 문제에 적용하여 주파수 및 좌굴하중을 개선하였으며, 전단수정계수의 도입 없이 예측을 개선할 수 있음을 보였다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1417-1425
• /
• 1990

본 연구에서는 취성재료인 유리판이 충격을 받을 때 생기는 크랙패턴 특히, 콘 크랙의 발생 현상을 이론적으로 규명하여 취성재료의 충격파괴방지에 도움이 되게 하고져 하였으며, 판두께방향의 변형을 고려한 제1보에서의 삼차원 동탄성이론에 의한 응력해석방법을 이용하여 충돌점 및 충돌점근방에서의 변형율분포를 해석하였다. 또 한 고속 및 자유낙하 충격시험을 행하여 얻은 크랙의 패턴과 본 이론해석 결과인 변형 률 분포의 수치계산 결과와 비교함으로써 콘 크랙의 발생현상을 3차원 동탄성이론을 이용한 본 충격응력해석 방법에 의한 규명하였다. 변형률 분포의 해석은 국부변형을 고려한 Hertz의 접촉이론과 Lagrange의 고전판 이론을 이용하여 구한 충격하중계수의 크기에 따라 충격하중의 함수근사식을 바꿔가며 해석하였으며 충돌점으로 부터 0.1cm 간격으로 5cm범위까지를 해석하였다.