• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.223-227
• /
• 2004

The pultruded structural shapes are usually composed of thin-walled plate elements. Because the composite material has relatively low elastic moduli, the design of pultruded compression members may not be governed by the material strength limit state but by the stability limit state such as the local buckling or the global buckling. Therefore, the stability limit state must be checked to design pultruded columns. In this research, the local buckling analysis of pultruded I-shape column was conducted for various composite materials using the closed-form solution. To establish the design guidelines for the local buckling of pultruded I-shape compression members, the simplified form of equation to find the local buckling coefficient of pultruded I-shape column was proposed as a function of mechanical properties and the width ratio of plate components using the results obtainde by the closed-form solution. In order to verify the validity of proposed solution, the results obtained by the proposed approximate solution were compared with those of the closed-form solution and the experimental results.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.171-188
• /
• 2020

The past research on cold-formed steel (CFS) flexural members have proved that rectangular hollow flanged sections perform better than conventional I-sections due to their higher torsional rigidity over the later ones. However, CFS members are vulnerable to local buckling, substantially due to their thin-walled features. The use of packing, such as firmly connected timber planks, to the flanges of conventional CFS lipped I-sections can drastically improve their flexural performance as well as structural efficiency. Whilst several CFS composites have been developed so far, only limited packing materials have been tried. This paper presents a series of tests carried out on different rectangular hollow compression flanged sections with innovative packing materials. Four-point flexural tests were carried out to assess the flexural capacity, failure modes and deformed shapes of the CFS composite beam specimens. The geometric imperfections were measured and reported. The North American Specifications and Indian Standard for cold-formed steel structures were used to compare the design strengths of the experimental specimen. The test results indicate clearly that CFS rectangular 'compression' flanged composite beams perform significantly better than the conventional rectangular hollow flanged CFS sections.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1013-1021
• /
• 1994

선형(線形) 변단면(變斷面) I-형(型) 부재(部材)의 비틂에 관한 고유진동해석(固有振動解析)을 위하여 강도행렬(剛度行列)과 질량행렬(質量行列)을 유도하였다. 유도과정(誘導過程)에서 형상함수(形狀函數)는 근사적으로 가정하였다. 변단면(變斷面) 부재(部材)의 구조물(構造物)을 해석하기 위하여 본 연구에서 유도된 강도행렬(剛度行列)과 질량행렬(質量行列)을 사용하여 구한 고유진동수(固有振動數)와 변단면(變斷面) 부재(部材)를 균일단면(均一斷面) 탑형태(塔形態)로 표현하여 구한 고유진동수(固有振動數)를 비교하여 본 연구 결과 효율성과 정확성이 증진된 것을 확인하였으며 실험(實驗) 결과와도 비교하였다. 본 연구에서 유도된 강도행렬(剛度行列)과 질량행렬(質量行列)은 변단면(變斷面) I-형(型) 부재(部材)와 균일단면(均一斷面) I-형(型) 부재(部材)의 자유진동해석(自由振動解析)에 사용할 수 있으며 ?을 고려한 3차원 해석에도 유용하게 사용될 수 있을 것이다.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.1-19
• /
• 2019

The aim of the paper is the prediction of the seismic collapse mode of steel storage pallet racks under seismic loads. The attention paid by the researchers on the behaviour of the industrial steel storage pallets racks is increased over the years thanks to their high dead-to-live load ratio. In fact, these structures, generally made by cold-formed thin-walled profiles, present very low structural costs but can support large and expensive loads. The paper presents a prediction of the seismic collapse modes of multi-storey racks. The analysis of the possible collapse modes has been made by an approach based on the kinematic theorem of plastic collapse extended to the second order effects by means of the concept of collapse mechanism equilibrium curve. In this way, the dissipative behaviour of racks is determined with a simpler method than the pushover analysis. Parametric analyses have been performed on 24 racks, differing for the geometric layout and cross-section of the components, designed in according to the EN16618 and EN15512 requirements. The obtained results have highlighted that, in all the considered cases, the global collapse mechanism, that is the safest one, never develops, leading to a dangerous situation that must be avoided to preserve the structure during a seismic event. Although the studied racks follow all the codes prescriptions, the development of a dissipative collapse mechanism is not achieved. In addition, also the variability of load distribution has been considered, reflecting the different pallet positions assumed during the in-service life of the racks, to point out its influence on the collapse mechanism. The information carried out from the paper can be very useful for designers and manufacturers because it allows to better understand the racks behaviour in seismic load condition.

• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.597-606
• /
• 2006

섬유강화 플라스틱은 강재의 단점을 보완할 수 있는 다양한 장점을 가지고 있기 때문에 현재 건설구조재로 사용하기 위한 연구가 활발히 진행되고 있다. 본 연구는 펄트루젼 FRP를 구조압축재로 사용하기 위한 설계식의 개발에 관한 연구의 일부로서 설계강도에 가장 큰 영향을 미치는 요소 중 국부좌굴거동에 관한 연구이다. 직교이방성 판요소로 구성된 압축부재의 설계에서 국부좌굴의 발생 여부, 국부좌굴을 주도하는 판요소의 구별 등은 매우 중요한 설계요소이며, 이러한 거동을 정밀해법에 의해 계산하기란 매우 복잡하고 난해하다. 따라서, 본 연구에서는 펄트루젼 압축부재의 설계규준 개발을 위해 필요한 국부좌굴계수를 정밀해법, 에너지법, 매개변수 해석 등의 방법을 적용하여 정확하면서도 쉽게 직교이방성판의 좌굴계수와 펄트루젼 압축부재의 국부좌굴계수를 계산할 수 있는 근사식을 제안하였으며 제안된 근사식을 사용하여 펄트루젼 압축부재의 국부좌굴발생 여부 및 국부좌굴을 주도하는 판요소를 구별할 수 있는 방법을 제안하였다.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.137-145
• /
• 2002

Automobiles should be designed to meet the requirements and standards for the protections of passengers in a car accident. One of safety factors is an absorbing capacity in collision. Many vehicles have been designed based on the criterion of the absorbing capacity. Therefore a controller has been developed in order to control and increase the absorbing capacity of impact energy in automobile collision. The capacity of impact energy will be improved regardless of vehicular-structure members and shapes. An air-pressure horizontal impact tester for crushing has been built up for the evaluation of energy absorbing characteristics in collision. Influence of height, thickness and clearance in the controller have been considered to predict and control the energy absorbing capacity. Aluminum alloy (Al) tubes (30,39,44 m in inner dia. and 0.8, 1.0, 1.2 m in thickness) are tested by axial loading. The energy absorbing capacity of Al tubes have been estimated in cases of with-controller and without-controller. respectively based on height. thickness, clearance of an controller.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.281-290
• /
• 2003

신형상 폐단면 냉간성형형강 스터드와 래프터로 구성된 포탈프레임의 접합부의 모멘트-회전각 관계, 회전강성, 항복모멘트 및 극한모멘트 등을 파악하기 위하여 접합부실험을 수행하였다. 실험의 주요 변수는 연강 접합철물의 두께 및 형상과 접합부 시험체의 비틀림에 관한 구속조건이며, 실험결과의 검증을 위해서 비선형해석 결과와 비교하였다. 반강접 접합부의 휨강성을 실험에 의한 모멘트-회전각 곡선으로 부터 구한 할선강도로 제안하여 구조해석을 통하여 타당성을 검토하였다.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1259-1277
• /
• 2015

The present study is focused on the behavior and design of perforated steel storage rack columns under axial compression. These columns may exhibit different types of behavior and levels of strength owing to their peculiar features including their complex cross-section forms and perforations along the member. In the present codes of practice, the design of these columns is carried out using analytical formulas which are supported by experimental tests described in the relevant code document. Recently proposed analytical approaches are used to estimate the load carrying capacity of axially compressed steel storage rack columns. Experimental and numerical studies were carried out to verify the proposed approaches. The experimental study includes compression tests done on members of different lengths, but of the same cross-section. A comparison between the analytical and the experimental results is presented to identify the accuracy of the recently proposed analytical approaches. The proposed approach includes modifications in the Direct Strength Method to include the effects of perforations (the so-called reduced thickness approach). CUFSM and CUTWP software programs are used to calculate the elastic buckling parameters of the studied members. Results from experimental and analytical studies compared very well. This indicates the validity of the recently proposed approaches for predicting the ultimate strength of steel storage rack columns.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.195-200
• /
• 2001

Composites have wide applications in aerospace vehicles and automobiles because of the inherent flexibility in their design for improved material properties. Composite tribes in particular, are potential candidates for their use as energy absorbing elements in crashworthiness applications due to their high specific energy absorbing capacity and the stroke efficiency. Their failure mechanism however is highly complicated and rather difficult to analyze. This includes fracture in fibres, in the matrix and in the fibre-matrix interface in tension, compression and shear. The purpose of this study is to investigate the energy absorption characteristics of CFRP(Carbon Fiber Reinforced Plastics) tubes on static and impact tests. Static compression tests have been carried out using the static testing machine and impact tests have been carried out using the vertical crushing testing machine. Interlaminar number affect the energy absorption capability of CFRP tubes. Also, theoretical and experimental have the same value.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1023-1031
• /
• 1994

선형변단면(線形變斷面) I-형(型) 부재(部材)의 3차원(次元) 공간(空間)에서의 고유진동해석(固有振動解析)을 위하여 회전관성(回轉慣性)도 포함하는 컨시스턴트 질량행렬(質量行列)을 유도하였다. 유도과정(誘導過程)에서 정확한 형상함수(形狀函數)를 사용했다. 일반적으로 많이 사용되는 변단면부재(變斷面部材)의 경사(傾斜)는 매우 작으므로 '정형식(整形式)'으로 표현된 행렬(行列)을 사용하여 변단면(變斷面) 부재(部材)를 포함하는 구조물(構造物)을 해석할 때에 신빙성 없는 결과를 얻게 된다. 이러한 수치적(數値的) 오류(誤謬)를 피하기 위하여 '급수식(級數式)'을 유도했다. 변단면(變斷面) 부재(部材)의 구조물(構造物)을 해석하기 위하여 본 연구에서 유도된 질량행렬(質量行列)을 사용하여 구한 고유진동수(固有振動數)와 변단면(變斷面) 부재(部材)를 균일단면(均一斷面)의 탑형태(塔形態)로 표현하여 ANSYS에서 구한 고유진동수(固有振動數)를 비교하여 본 연구 결과 효율성과 정확성이 증진된 것을 확인하였다. 본 연구에서 유도된 질량행렬(質量行列)은 변단면(變斷面) 부재(部材)와 균일단면(均一斷面) 부재(部材)의 자유진동해석(自由振動解析)에 사용할 수 있다.