Browse > Article
http://dx.doi.org/10.12989/scs.2020.34.2.171

Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges  

Dar, M. Adil (Department of Civil Engineering, Indian Institute of Technology Delhi)
Subramanian, N. (Consulting Engineer)
Dar, Dawood A. (Department of Civil Engineering, National Institute of Technology Srinagar)
Dar, A.R. (Department of Civil Engineering, National Institute of Technology Srinagar)
Anbarasu, M. (Department of Civil Engineering, Government College of Engineering Salem)
Lim, James B.P. (Department of Civil & Environmental Engineering, University of Auckland)
Mahjoubi, Soroush (School of Civil Engineering, Iran University of Science and Technology)
Publication Information
Steel and Composite Structures / v.34, no.2, 2020 , pp. 171-188 More about this Journal
Abstract
The past research on cold-formed steel (CFS) flexural members have proved that rectangular hollow flanged sections perform better than conventional I-sections due to their higher torsional rigidity over the later ones. However, CFS members are vulnerable to local buckling, substantially due to their thin-walled features. The use of packing, such as firmly connected timber planks, to the flanges of conventional CFS lipped I-sections can drastically improve their flexural performance as well as structural efficiency. Whilst several CFS composites have been developed so far, only limited packing materials have been tried. This paper presents a series of tests carried out on different rectangular hollow compression flanged sections with innovative packing materials. Four-point flexural tests were carried out to assess the flexural capacity, failure modes and deformed shapes of the CFS composite beam specimens. The geometric imperfections were measured and reported. The North American Specifications and Indian Standard for cold-formed steel structures were used to compare the design strengths of the experimental specimen. The test results indicate clearly that CFS rectangular 'compression' flanged composite beams perform significantly better than the conventional rectangular hollow flanged CFS sections.
Keywords
cold-formed steel; composite sections; experiment; flexural members; local buckling;
Citations & Related Records
Times Cited By KSCI : 18  (Citation Analysis)
연도 인용수 순위
1 Priyanga, R.S. and Ramalingam, R. (2018), "In plane compression behaviour of steel profle sheets", Int. J. Steel Struct., 19(1), 293-300. https://doi.org/10.1007/s13296-018-0116-9.   DOI
2 Sani, M.S.H.M., Kamal, M.M.M, Muftah, F. and Tan, C.S. (2016), "Flexural performance of built-up cold-formed steel beam filled with compacted soil", J. Eng. Appl. Sci., 11(16), 9855-9862.
3 Sani, M.S.H.M., Muftah, F. and Ismail, M.I. (2018), "Testing and analysis of cold-formed steel channel section with notch", Int. J. GEOMATE, 14(43), 42-49. https://doi.org/10.21660/2018.43.3539.
4 Sani, M.S.H.M., Muftah, F. and Osman, A.R. (2019), "A review and development of cold-formed steel channel columns with oriented strand board sections", Mater. Today Proceedings, 17(3), 1078-1085 https://doi.org/10.1016/j.matpr.2019.06.519.   DOI
5 Sharafi, P., Mortazavi, M., Usefi, N., Kildashti, K., Ronagh, H. and Samali, B. (2018), "Lateral force resisting systems in lightweight steel frames: Recent research advances", Thin Wall. Struct., 130, 231-253. https://doi.org/10.1016/j.tws.2018.04.019.   DOI
6 Siahaan, R., Keerthan, P. and Mahendren, M. (2018), "Section moment capacity design rules for rivet fastened rectangular hollow flange channel beams", Thin Wall. Struct., 127, 781-797. https://doi.org/10.1016/j.tws.2018.02.013.   DOI
7 Usefi, N., Sharafi, P. and Ronagh, H. (2019), "Numerical models for lateral behaviour analysis of cold-formed steel framed walls: State of the art, evaluation and challenges", Thin Wall. Struct., 138, 252-285. https://doi.org/10.1016/j.tws.2019.02.019.   DOI
8 Valsa Ipe, T., Sharada Bai, H., Manjulavani, K. and Merchant Mohd Zafar Iqbal (2013) "Flexural behaviour of cold-formed steel-concrete composite beams" Steel Compos. Struct., 14(2), 105-120. https://doi.org/10.12989/scs.2013.14.2.105.   DOI
9 Yang, Y. and Lui, E.M. (2012), "Behavior and design of steel I-beams with inclined stiffeners", Steel Compos. Struct., 12(3), 183-205. https://doi.org/10.12989/scs.2012.12.3.183.   DOI
10 Ye, J., Hajirasouliha, I., Becque, J. and Pilakotus, K. (2016) "Development of more efficient cold formed steel channel sections in bending", Thin Wall. Struct., 101, 1-13. https://doi.org/10.1016/j.tws.2015.12.021.   DOI
11 Dar, M.A., Dar, A.R., Yusuf, M. and Raju, J. (2015a), "Experimental study on innovative sections for cold formed steel beams", Steel Compos. Struct., 19(6), 1599-1610. https://doi.org/10.12989/scs.2015.19.6.1599.   DOI
12 Dar, M.A., Sahoo, D.R., Pulikkal, S. and Jain, A.K. (2018a), "Behavior of laced built-up cold-formed steel columns: Experimental investigation and numerical validation", Thin Wall. Struct., 132, 398-409. https://doi.org/10.1016/j.tws.2018.09.012.   DOI
13 Dar, M.A., Subramanian, N., Dar, A.R., Anbarasu, M. and Lim, J.B.P. (2018b), "Structural Performance of Cold-formed Steel Composite Beams", Steel Compos. Struct., 27(5), 545-554. https://doi.org/10.12989/scs.2018.27.5.545.   DOI
14 Dar, M.A., Subramanian, N., Dar, A.R. and Raju, J. (2017), "Rehabilitation of a distressed steel roof truss - A study", Struct. Eng. Mech., 62(5), 567-576. https://doi.org/ 10.12989/sem.2017.62.5.567.   DOI
15 Biggs, K.A., Ramseyer, C., Ree, S. and Kang, T.H. (2015), "Experimental testing of cold-formed built-up members in pure compression", Steel Compos. Struct., 18(6), 1331-1351. https://doi.org/10.12989/scs.2015.18.6.1331.   DOI
16 Dar, M.A., Subramanian, N., Dar, A.R. and Raju, J. (2015b), "Experimental investigations on the structural behaviour of a distressed bridge", Struct. Eng. Mech., 56(4), 695-705 https://doi.org/ 10.12989/sem.2015.56.4.695.   DOI
17 Gao, F., Zhu, H.P., Zhang, D.H. and Fang, T.S. (2014), "Experimental investigation on flexural behavior of concrete-filled pentagonal flange beam under concentrated loading", Thin Wall. Struct., 84, 215-225. https://doi.org/10.1016/j.tws.2014.06.008.
18 Awaludin, A., Rachmawati, K., Aryati, M. and Danastri, A.D. (2015), "Development of cold formed steel-timber composite for roof structures: compression members", Procedia Eng., 125, 850-856. https://doi.org/10.1016/j.proeng.2015.11.052.   DOI
19 Hancock, G.J. (2016), "Cold-formed steel structures: Research review 2013-2014", Adv, Struct. Eng., 19(3), 1-16. https://doi.org/10.1177/1369433216630145.   DOI
20 Hassanein, M.F. (2015), "Fundamental behavior of concrete-filled pentagonal flange plate girders under shear", Thin Wall. Struct., 95, 221-230. https://doi.org/10.1016/j.tws.2015.07.003.   DOI
21 Hassanein, M.F., Kharoob, O.F. and Taman, M.H. (2017) "Experimental investigstion of cementicious material-filled square thin-walled steel beams", Thin Wall. Struct., 114, 134-143. https://doi.org/10.1016/j.tws.2017.01.031.   DOI
22 IS 801(1975), Code of Practice for Use of Cold Formed Light Gauge Steel Structural Members in General Building Construction, Bureau of Indian Standards, New Delhi, India.
23 Kumar, N. and Sahoo, D.R. (2016), "Optimization of lip length and aspect ratio of thin channel sections under minor axes bending", Thin-Wall. Struct., 100, 158-169. https://doi.org/10.1016/j.tws.2015.12.015.   DOI
24 Javed, M.F., Hafizah, N., Memon, S.A., Jameel, M. and Aslam, M. (2017), "Recent research on cold-formed steel beams and columns subjected to elevated temperature: A review", Constr. Build. Mater., 144, 686-701. https://doi.org/10.1016/j.conbuildmat.2017.03.226.   DOI
25 Khate, K., Patton, M.L. and Marthong, C. (2018) "Structural behaviour of stainless steel stub column under axial compression: a FE study", Int. J. Steel Struct., 18, 1-18. https://doi.org/10.1007/s13296-018-0083-1.   DOI
26 Kim, S., Yom, K. and Choi, S. (2015), "A study on the structural performance of new shape built-up square column under concentric axial load", Steel Compos. Struct., 18(6), 1451-1464. https://doi.org/ 10.3850/978-981-07-2615-7_237.   DOI
27 Li, Y., Shan, W., Shen, H., Zhang, Z. and Liu, J. (2014), "Bending resistance of I-section bamboo-steel composite beams utilizing adhesive bonding", Thin Wall. Struct., 89, 17-24. https://doi.org/10.1016/j.tws.2014.12.007.   DOI
28 Magnucka-Blandzi, E. (2010), "Effective shaping of cold-formed thin-walled channel beams with double-box flanges in pure bending", Thin Wall. Struct., 49(1), 121-128. https://doi.org/10.1016/j.tws.2010.08.013.   DOI
29 Dar, M.A., Subramanian, N., Dar, A.R., Lim, Anbarasu, M., J.B.P., and Mir, A. (2019a), "Behaviour of partly stiffened cold-formed steel built-up beams: Experimental investigation and numerical validation", Adv. Struct. Eng., 22(1) 172-186. https://doi.org/10.1177/1369433218782767.   DOI
30 Muftah, F., Sani, M.S.H.M. and Kamal, M.M.M. (2019), "Flexural strength behaviour of bolted built-up cold-formed steel beam with outstand and extended stiffener", Int. J. Steel Struc., 19(3), 719-732. https://doi.org/10.1007/s13296-018-0157-0.   DOI
31 Dar, M.A., Subramanian, N., Dar, A.R., Majid, M., Haseeb, M. and Tahoor, M. (2019b), "Structural efficiency of various strengthening schemes for cold-formed steel beams: Effect of global imperfections", Steel Compos. Struct., 30(4), 393-403 https://doi.org/ 10.12989/scs.2019.30.4.393.   DOI
32 Dar, M.A., Subramanian, N., Rather, A.I., Dar, A., Lim JBP, Anbarasu M. and Roy, K. (2019c), "Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams", Steel Compos. Struct., 33(2), 225-243. https://doi.org/ 10.12989/scs.2019.33.2.225.   DOI
33 Dar, M.A., Subramanian, N., Dar, A.R., Rather, A.I., Mir, A. and Syed, S., (2019d), "Strengthening of capacity deficient RC beams- An experimental approach", Struct. Eng. Mech., 70(3), 303-310. https://doi.org/ 10.12989/sem.2019.70.3.303.   DOI