• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.323-327
• /
• 1995

A new air knife system for coating thickness control in hot dip galvanizing process had been developed and installed on the CGL in Pohang Steel Works, POSCO. This new system consists of air knives with remotely adjustable nozzle slot and an automatic control system which can control both longitudinal and traverse coating deviations. Based on the optimal control algorithm, a traverse coating deviation control was designed. The controller controls the lip profile of the air knives with flexible structure according to the deviation of coating weight. From the measured values which are dependent on the strip width, the lip gaps are calculated with optimal algorithm and the model of the coating deviation. Time delay between knives and a coating thickness gauge is solved by the Smith Predictor.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.319-322
• /
• 1996

Automatic gauge control algorithm in rolling process is composed of several functions. Among them feedforward control method is used to compensate irregularity of input strip thickness before rolling process. Since it's very difficult to get an explicit relation between the degree of irregularity of input strip and manipulated variables, approximate linear equation like straight line is used in real system. Furthermore parameters included in such static equation should be changed by characteristics of input strip and modified by roll states. Despite this problem, rolling process use variables in feedfroward controller as a constant. Therefore this problem increases the possibilities of irregularity of thickness control. This paper presents an algorithm which can properly infer present states of process and intelligently manipulate the parameter of feedforward controller.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.692-695
• /
• 1999

This paper presents annealing characteristics of CrN thin-film strain gauges, which were deposited on glass by DC reactive magnetron sputtering in an argon-nitrogen atmosphere)Ar-(5-~25%)$N_2$. The physical and electrical characteristics of these films investigated with the thickness range 3500$\AA$ of CrN thin films, annealing temperature (100~30$0^{\circ}C$) and annealing time (24-72hr) . The optimized condition of CrN thin-film strain gauges were thickness range of 3500$\AA$ and annealing condition(30$0^{\circ}C$ , 48hr) in Ar-10%$N_2$ deposition atmosphere. Under optimum conditions, the CrN thin-films for strain gauge is obtained a high resistivity, $\rho$=1147.65$\Omega$cm a low temperature coefficient of 11.17. And change in resistance after annealing for the CrN thin film were quitely linear and stable.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.892-894
• /
• 1995

This paper deals with developmeant and application of coating thickness control system in hot dip galvanizing process. According to the line conditions, such as line speed, strip size and target coating weight, a predictive preset model sets the initial oprating conditions. Referring the zine coating informations from the gauge, mean coating value controller adjusts the chamber pressure and horizontal distance between strip and air knife, while coating deviation controller adjusts the lip gap profile of the air knife. All adaptive gains are interactively calculated by numeric models based on the theoretical analysis. The operating result with this system effectively reduces the coating deviation in transverse direction as well as in longitudinal direction.

• Journal of Convergence Korean Medicine
• /
• v.5 no.2
• /
• pp.17-22
• /
• 2023

Objectives: This study aimed to investigate the anti-atopic properties of Glechoma hederacea var. longituba extracts (GHE) in murine atopic dermatitis model. Methods: BALB/c mouse ear stimulated with oxazolone (OX) for 4 weeks, then 1% GHE was topically applied every two days for 3 weeks to mouse. Ear thickness was measured by a digital thickness gauge. The ears tissues were collected and subjected to hematoxylin-eosin (H&E) and toluidine blue (TB) staining. Results: Treatment with GHE successfully alleviated the symptoms of atopic dermatitis, such as erythema, horny substance, and swelling. The infiltration of lymphocytes and mast cells were significantly reduced following GHE treatment. Conclusion: Taken together, our results showed that GHE possessed the potential to be a novel immunomodulatory drug against atopic dermatitis.

• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.165-178
• /
• 1999

Knitwears it was only for the innerwear, but which has become more available for sportswear and highly valuable formal-dresses for women's apparel and is set a trend toward high value-added products worldwide. Also the industry connected knitwears is more widely applicative than woven industry and is running on the well founded basement for the small enterprises. This study notes that what problems are caused and which utilities can be expected when we design knitwears by Primavision and Texpia CAD system considered the programs for development of domestic knitwears industry. There are much various benefits for designing knitwears from CAD system as shortening working hours, convenience, accuracy, quality control and productivity. It doesn't depend on designer's technique, sense and experiences, but provides, through building the design accuracy, chance to have a precise communication with buyers to be satisfied with the multiplicity, uniqueness and high-quality resulting from reducing the mistake on the operation. But there are some problems for using CAD design system those are no selections for the form, type and thickness of the yarn. Even though it is knitted by the same gauge, the texture conditions show complete difference if the form and thickness is different with. The gauge control without regarding those ought to be improved and the yarn designing function should be appended like in a tektite design. And the CAD design system can not reflect the variables of operating knitting machine and needle. The CAD design system provides the manufacturers with merits those they can change the colors easily to select which one appeals to the customer and check the effects of producing and modeling on monitor. But, in the each producing progress, there are still problems to reduce the practical steps, so intensive care is required of each part.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.46-52
• /
• 2019

This work proposes a noncontact ultrasonic transducer for detecting wall-thinning of containment liner plates of nuclear power plants by measuring their thickness without physical contact. Because the containment liner plate is designed to prevent atmospheric leakage of radioactive substances under severe nuclear accident, its wall-thinning inspection is important for safety of nuclear power plants. Wall-thinning investigation of containment liner plates have been carried out by measuring their thickness with contact-type ultrasonic thickness gauge by inspectors and needs a lot of time and cost. As an alternative, an electromagnetic acoustic transducer measuring precisely thickness of containment liner plates without any physical contact or couplant was suggested in this research. A transducer generating and measuring shear ultrasonic waves in thickness direction was designed and wave field produced by the transducer was analyzed to verify the design. The working performance of the suggested transducer was tested with carbon steel plate specimens with various thicknesses. The test result shows that the proposed transducer can measure thickness of the specimens precisely without any couplant and implies that swift scanning of wall-thinning of containment liner plates will be possible with the proposed transducer.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.4
• /
• pp.53-63
• /
• 2022

PURPOSE: This study examined the changes in the thickness of the abdominal muscles, including the transversus abdominis, according to the set pressure applied by a pressure biofeedback unit during contractions of the hip adductor muscles. METHODS: After randomizing 40 healthy adult males in their 20 s and 30 s, the participants were instructed to match the pressure gauge indication of the pressure biofeedback device to continue contracting the hip adductor while maintaining it at 10 mmHg (low), 40 mmHg (medium), or 70 mmHg (high). The measurement was taken over five seconds using an ultrasound device. RESULTS: According to the contractile pressure applied to the hip adductor muscle, there was a significant difference in the muscle thickness change of the transverse abdominis muscle between 10 mmHg and 70 mmHg and between 40 mmHg and 70 mmHg. The muscle thickness ratio of the external oblique/abdominal muscle was significantly different between 10 mmHg and 70 mmHg and between 40 mmHg and 70 mmHg. CONCLUSION: Increased contraction pressure on the hip adductor muscle increases the muscle thickness of the abdominal transverse muscle. Interbody stability exercise with contractions of the hip adductor muscle is expected to help increase in the muscle thickness of the hip adductor muscle.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.26-32
• /
• 2013

A digital image correlation(DIC) method is a whole-field measurement technique that acquires surface displacements and strains from images information which characterized a random speckle as intensity grey levels. Recently years, this DIC method is being developed and used increasingly in various research. In this study, we tried to apply to aluminum alloy(Al 6061-T6) using DIC method and strain gauge. DIC results demonstrated the usefulness and ability to determine a strain. The test specimen used in this study was an aluminum alloy(Al 6061-T6, thickness 1 mm). For a strain measurement, a strain gauge was attached at the center of a specimen. A specimen was lightly sprayed with a white paint and a black dot pattern was sprayed on its fully dried white surface to obtain a random speckle. The experimental apparatus used to perform the tensile test consisted of universal dynamic tester(5 kN; T.O. Co.) under displacement speed of 0.5, 1.0 and 3.0 mm/min. A Model 5100 B Scanner(V. Co.) used to obtain a strain. A CCD camera connected to a PC uses to record the images of the specimen surface. After acquisition, the images were transferred to PC where the DIC software was implemented. An acquired image was evaluated by the DIC program. DIC method for displacement and strain was suggests and it results show a good consistent remarkably. DIC results demonstrated the usefulness and ability to determine surface strain was better than by using classical measurements. The strain field measurement using a DIC is so useful that it can be applied to map strain distributions at a full area. DIC method can evaluate a strain change so it can predict a location of fracture. The findings of the investigation suggest that the DIC method is an efficient and reliable tool for full-field monitoring and detailed damage characterization of materials.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.380-386
• /
• 2006

Electric fuel sender fur the vehicle fuel gauge system was designed and fabricated based on the CPW(Co-Planer Waveguide) transmission line theory. It is applied on this system that characteristic impedance of RF transmission line can be varied by the surrounded material of the line. By the characteristic impedance owing the level of gasoline or diesel fuel in vehicle fuel tank, CPW line has corresponding reflected signal as much as changed impedance. Detected signal is amplified, and delivered to fuel indicator into cluster unit on dash board. Conventional floating mechanical buoy level gauge has several defects as low reliability and high break down rate by mechanical operation, and has not good linearity for the fuel level difference. CPW line with electric circuits are constructed on 1.6 mm thickness epoxy substrate, and measurement shows that this system has more accurate level and better linearity than conventional mechanical system. New electric fuel sender which has good productivity with long lifetime and low-in-cost by the SMT chip assembling could be replaced this system with conventional floating buoy system.