• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1816-1821
• /
• 2019

This research investigates the feasibility of using the thermoelectric power to monitor the thermal embrittlement in 2507 super duplex stainless steel (SDSS) exposed to a temperature between $280^{\circ}C$ and $500^{\circ}C$. It is well known that the precipitation of Cr-rich ${\alpha}^{\prime}$ phase as a result of the spinodal decomposition is the major cause of the embrittlement and the loss of corrosion resistance in this material. The specimens are thermally aged at $475^{\circ}C$ for different holding times. A series of mechanical testing including the tensile test, Vickers microhardness measurement, and Charpy impact test are conducted to determine the property changes with holding time due to the embrittlement. The mechanical strengths and ferrite hardness exhibit very similar trends. Scanning electron microscopy images of impactfractured surfaces reveal a ductile to brittle transition in the fracture mode as direct evidence of the embrittlement. It is shown that the thermoelectric power is highly sensitive to the thermal embrittlement and has an excellent linear correlation with the ferrite hardness. This paper, therefore, demonstrates that the thermoelectric power is an excellent nondestructive evaluation technique for detecting and evaluating the $475^{\circ}C$ embrittlement of field 2507 SDSS structures.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1534-1539
• /
• 2018

SnSe single crystal showed a high thermoelectric zT of 2.6 at 923 K mainly due to an extremely low thermal conductivity $0.23W\;m^{-1}\;K^{-1}$. It has anisotropic crystal structure resulting in deterioration of thermoelectric performance in polycrystalline SnSe, providing a low zT of 0.6 and 0.8 for Ag and Na-doped SnSe, respectively. Here, we presented the thermoelectric properties on the K-doped $K_xSn_{1-x}Se$ (x = 0, 0.1, 0.3, 0.5, 1.5, and 2.0%) polycrystals, synthesized by a high-temperature melting and hot-press sintering with annealing process. The K-doping in SnSe efficiently enhances the hole carrier concentration without significant degradation of carrier mobility. We find that there exist widespread Se-rich precipitates, inducing strong phonon scattering and thus resulting in a very low thermal conductivity. Due to low thermal conductivity and moderate power factor, the $K_{0.001}Sn_{0.999}Se$ sample shows an exceptionally high zT of 1.11 at 823 K which is significantly enhanced value in polycrystalline compounds.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.113-121
• /
• 2021

In this study, the thermal characteristics of cold and hot water mattress units equipped with thermoelectric modules were investigated via numerical analyses. Cold and hot water mattress products that are currently in existence use manual methods requiring refrigerants to be added to the hot water boiler. However, the cold and hot water mattress units using thermoelectric modules can provide improved efficiency via energy savings and actively resolving environmental pollution problems. To determine the efficiency of the thermoelectric module, the mattress was modeled and its efficiency was analyzed for the cooling and heating processes using two 100-W-class and one 200-W-class thermoelectric modules, respectively. From the results of this study, it was confirmed that when two 100-W-class modules were used, the application area was larger than when a single 200-W-class module was used, with uniform temperature distribution and improved performance compared to existing products in terms of electrical energy.

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.103-107
• /
• 2021

좁은 밴드갭 반도체 특성을 나타내는 열전소재의 온도에 따른 전자전도 및 열전도 특성은 다수 캐리어 뿐 아니라 소수 캐리어의 전도 거동에 의해 결정된다. 따라서 소수 캐리어의 weighted mobility에 대한 다수 캐리어의 weighted mobility의 비율로 정의되는 weighted mobility ratio는 열전소재의 성능 증대에 매우 중요한 인자이다. 본 논문에서는 열전소재의 전자전도 현상에 대한 이론적인 고찰을 바탕으로 weighted mobility ratio 제어가 열전소재의 성능에 미치는 영향을 규명하여 고성능 Bi-Te계 열전소재 개발에 효과적으로 활용할 수 있는 소재 설계 지침을 제공하고자 한다.

• 한국재료학회지
• /
• 제32권6호
• /
• pp.287-292
• /
• 2022

Magnesium-antimonide is a well-known zintl phase thermoelectric material with low band gap energy, earth-abundance and characteristic electron-crystal phonon-glass properties. The nominal composition Mg_3.8-xZn_xSb₂ (0.00 ≤ x ≤ 0.02) was synthesized by controlled melting and subsequent vacuum hot pressing method. To investigate phase development and surface morphology during the process, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were carried out. It should be noted that an additional 16 at. % Mg must be added to the system to compensate for Mg loss during the melting process. This study evaluated the thermoelectric properties of the material in terms of Seebeck coefficient, electrical conductivity and thermal conductivity from the low to high temperature regime. The results demonstrated that substituting Zn at Mg sites increased electrical conductivity without significantly affecting the Seebeck coefficient. The maximal dimensionless figure of merit achieved was 0.30 for x = 0.01 at 855 K which is 30% greater than the intrinsic value. Electronic flow properties were also evaluated and discussed to explain the carrier transport mechanism involved in the thermoelectric properties of this alloy system.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.318-323
• /
• 2023

The thermoelectric effect, which converts waste heat into electricity, holds promise as a renewable energy technology. Recently, bismuth telluride (Bi2Te3)-based alloys are being recognized as important materials for practical applications in the temperature range from room temperature to 500 K. However, conventional sintering processes impose limitations on shape-changeable and tailorable Bi₂Te₃ materials. To overcome these issues, three-dimensional (3D) printing (additive manufacturing) is being adopted. Although some research results have been reported, relatively few studies on 3D printed thermoelectric materials are being carried out. In this study, we utilize extrusion 3D printing to manufacture n-type Bi_1.7Sb_0.3Te₃ (N-BST). The ink is produced without using organic binders, which could negatively influence its thermoelectric properties. Furthermore, we introduce graphene oxide (GO) at the crystal interface to enhance the electrical properties. The formed N-BST composites exhibit significantly improved electrical conductivity and a higher Seebeck coefficient as the GO content increases. Therefore, we propose that the combination of the extrusion 3D printing process (Direct Ink Writing, DIW) and the incorporation of GO into N-BST offers a convenient and effective approach for achieving higher thermoelectric efficiency.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.89-94
• /
• 2022

고체상태에서 열에너지과 전기에너지를 직접적이고 가역적으로 변환할 수 있는 열전소재는 전기전도특성인 전기전도도 및 제벡계수와 열전도특성인 열전도도에 의해 그 성능이 결정된다. 하지만 전기전도도, 제벡계수, 열전도도는 소재의 조성, 결정구조 및 전자구조에 의해 결정되며, 서로 상관관계를 나타내기 때문에 성능 증대를 위한 효과적인 전략수립에 어려움이 있다. 본 논문에서는 열전소재의 성능과 관련한 수식에 대한 이해를 바탕으로 실험 결과와 연계하여 열전도도 저감 관점에서 효과적인 결함제어 기반 열전소재 성능 증대 전략을 수립할 수 있는 방법론을 제공하고자 한다.

• 한국분말재료학회지
• /
• 제31권3호
• /
• pp.236-242
• /
• 2024

The development of thermoelectric (TE) materials to replace Bi₂Te₃ alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.481-486
• /
• 1990

Microstructure of polycrystalline Lead Telluride was controlled by the change of sintering conditions. Three properties which determine the thermoelectric figure of merit of the material were measured in the temperature range of 300-650K in order to investigate the effect of each sintering condition on the thermoelectric efficiency. Based on the observed experimental results, defect structure is concluded to be more important than microstructure though both can be controlled by processing variables.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.564-568
• /
• 1998

All elements and systems of electronics have optimum temperature conditions. A using of the thermoelectric method of cooling is the most approach for the thermal management of power electronics. An analysis of using the thermoelectric cooling and the temperature control is given as an efficient method of ensuring a work of power electronic devices in conditions of micro-miniaturization.