• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.3
• /
• pp.107-113
• /
• 2015

This work focused on the study of thermal properties and kinetic behavior of LDPE-nanoclay composite films. The effect of nanoclay content (0.5, 1, 3, and 5 wt%) on thermal stability and crystallization characteristics of the nanocomposites were investigated by Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The results from endothermic curve showed that the nanoclay played an important role in the crystallization of nanocomposites by acting as nucleating agent. From exothermic curve, there was a crystallization temperature shift which was attributed to crystallization process induced by nanoclay. The TGA results showed that the addition of nanoclay significantly increased the thermal stability of LDPE matrix, which was likely due to the characteristic of layered silicates/clays dispersed in LDPE matrix as well as the formation of multilayered carbonaceous-silicate char. A well-known Coats-Redfern method was used to evaluate the decomposition activation energy of nanocomposite. It was demonstrated that introducing of nanoclay to LDPE matrix escalated the activation energy of nanocomposite decomposition resulting in thermal stability improvement.

• Environmental and Resource Economics Review
• /
• v.9 no.5
• /
• pp.811-827
• /
• 2000

Since improved thermal efficiency reduces capacity requirements and energy costs, electricity producers often treat thermal efficiency as a measure of management or economic performance. The conventional measure of the thermal efficiency of a fossil-fuel generation system is the ratio of total electricity generation to the simple sum of energy inputs. As a refined approach, we present a novel thermal efficiency measure using the concept of the Divisia index number. Application of this approach to the Korean power sector shows improvement of thermal efficiency of 1.1% per year during 1970-1998. This is higher than the 0.9% improvement per year given by the conventional method. The difference is attributable to the effect of fuel substitution. In the Divisia decomposition context, we also show the limitations of the popular $T{\ddot{o}}rnqvist$ index formula and the superiority of the Sato-Vartia formula.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.836-843
• /
• 2008

An efficient domain/boundary decomposition method is applied for heat transfer problems with non-linear thermal radiation boundaries. The whole domain of solids or structures is considered as set of subdomains, an interface, and radiation interfaces. In a variational formulation, simple penalty functions are introduced to connect an interface or radiation interfaces with neighboring subdomains that satisfy continuity conditions. As a result, non-linear finite element computations due to the thermal radiation boundaries can be localized within a few subdomains or radiation interfaces. Therefore, by setting up suitable solution algorithms for the governing finite element equations, the computational efficiency can be improved considerably. Through a set of numerical examples, these distinguishing characteristics of the present method are investigated in detail.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.120-126
• /
• 1997

The thermal decomposition of low density polyethylene(LDPE) and $25\%{\~}48\%$ chlorinated polyethylene(CPE) were studied using a dynamic thermogravimetry in the stream of nitrogen gas with 20ml/min. The mathematic method, differential (Friedman) and Integral (Ozawa) method were used to obtain value of activation energy of decomposition energy on the reaction. The activation energies evaluated by the above methods agree with each other very well. The maximum average activation energy calculated was 71.71kcal/mol. The thermal decomposition of LDPE and CPE were considered to be carried out by main chain scission and the thermogravimetric trace curve agree with the theoretical equation.

• Carbon letters
• /
• v.13 no.2
• /
• pp.99-108
• /
• 2012

The sol-gel technique has been studied to fabricate a homogeneous Fe-Mo/MgO catalyst. Ambient effects (air, Ar, and $H_2$) on thermal decomposition of the citrate precursor have been systematically investigated to fabricate an Fe-Mo/MgO catalyst. Severe agglomeration of metal catalyst was observed under thermal decomposition of citrate precursor in air atmosphere. Ar/$H_2$ atmosphere effectively restricted agglomeration of bimetallic catalyst and formation of highly-dispersed Fe-Mo/MgO catalyst with high specific surface-area due to the formation of Fe-Mo nanoclusters within MgO support. High-quality thin-multiwalled carbon nanotubes (t-MWCNTs) with uniform diameters were achieved on a large scale by catalytic decomposition of methane over Fe-Mo/MgO catalyst prepared under Ar-atmosphere. The produced t-MWCNTs had outer diameters in the range of 4-8 nm (average diameter ~6.6 nm) and wall numbers in the range of 4-7 graphenes. The as-synthesized t-MWCNTs showed product yields over 450% relative to the utilized Fe-Mo/MgO catalyst, and indicated a purity of about 85%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.260-262
• /
• 2003

A thermal vapor deposition method for crystallization of insoluble analytes with matrix is established as a new sample preparation method for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). A mixture of mono, bis and tris(p-ethyl benzylidene) sorbitols was incorporated into microcrystals of ferulic acid, which was confirmed by confocal micrographs. Molecular masses of sorbitol derivatives were determined in this way by MALDI-MS without thermal decomposition.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.311-313
• /
• 2003

A thermal vapor deposition method for crystallization of insoluble analysis with matrix is established as a new sample preparation method for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). A mixture of mono, bis and tris(p-ethyl benzylidene) sorbitols was incorporated into microcrystals of ferulic acid, which was confirmed by confocal micrographs. Molecular masses of sorbitol derivatives were determined in this way by MALDI-MS without thermal decomposition.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.476-479
• /
• 2013

$CoSb_3$ with its high electrical conductivity, Seebeck coefficient and rather low thermal conductivity is quite a promising material for thermoelectric conversion applications. A potentially high figure of merit (ZT) can be achieved by a nanostructure evolution of thermoelectric materials. In this work, $CoSb_3$ nanoparticles were synthesized through a thermal decomposition method in cooperation with a hot injection technique. Nano-sized $CoSb_3$ particles were obtained through the thermal decomposition reaction between the pre-heated cobalt-oleate at $320^{\circ}C$ and the injected antimony oleate with room temperature. The results showed that the particle size was increased with increasing synthesis temperature and the crystallinity of particles was improved with temperature but the decomposition of $CoSb_3$ was observed at $320^{\circ}C$. The $CoSb_3$ particles synthesized at $300^{\circ}C$ showed a high purity and an homogeneous shape with average particle size of 26 nm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.32-44
• /
• 2010

A two-dimensional thermal response and ablation analysis code for predicting charring material ablation and shape change on solid rocket nozzle is presented. The thermogravimetric analysis (TGA) techniques have been used to characterize the thermal decomposition constants for Arrhenius parameters. Two heterogeneous reactions involving carbon and the oxidizing species of $H_2O$ and $CO_2$ are considered and determined by Zvyagin's ablation model and kinetic constants. The moving boundary problem and mesh moving are solved by remeshing-rezoning method in MSC-Marc-ATAS program. The difference between the calculated and experimental value of char and ablation thickness is up to 20%. For the performance prediction of thermal protection systems, this method will be integrated with a three-dimensional finite-element thermal and structure analysis code through the real time sensing of in-depth temperature and heat flux.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.81-87
• /
• 2003

Latex polymers are widely used for adhesive, binder, paint etc. Especially the PVAc(Polyvinyl acetate) latex which manufactured by vinyl acetate and vinyl alcohol as protective colloid is a useful environmentally friendly adhesive. To increase useful property of PVAc latex, this study was carried out for checking thermal characteristics and physical condition of PVAc latex by DSC, FT-IR, Pyrolyzer GC-MS. The activation energies of thermal decomposition for 40, 48, 56, 64% solid content of PVAc latex were found as 28.1-36.0kcal/mol by Kissinger's method and 17.2-22.0kcal/mol by DSC method. Actually, reasonable solid content could be consiered as 56% because of activation energy and adhesive characteristics. According to the effect of protective colloid for 4, 10, 15, 20wt%, the activation energy shows same tendency to both method and in case of l5wt% has been found as the highest activation energy. The mechanism of thermal decomposition was mainly estimated by main chain scission, not by side group on FT-IR analysis. Main component of Pyrolzer GC-MS result were consisted of $CH_3COOH$, $CH_3$, $H_2O$ and light gases(CO, $CO_2$, $CH_4$ etc).