• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.778-784
• /
• 2022

Wild vegetables, such as Cirsium setidens, and Aster scaber, are commonly distributed as dried materials because the wild vegetables lose their freshness quickly after harvest and distribution. Dried wild vegetables require rehydration to use as a food ingredient, and the quality of rehydrated wild vegetables is affected by pre-drying and drying methods. Here, we introduce the newly developed pre-drying and drying method, termed "micro oil sprayed thermal air (MOTA) technique". The three wild vegetables processed by the MOTA technique showed improved rehydration rate and reduced time to achieve maximum rehydration rate. Color characteristics were also improved in C. setidens. These results indicate that the MOTA technique improves the overall quality of rehydrated wild vegetables. It is expected that our findings could enhance the marketability of dried wild vegetables by improving overall quality and reducing preparation time.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.6
• /
• pp.768-775
• /
• 2022

In this study we aimed to derive the response surface models for Escherichia coli reduction in wheat flour using atmospheric cold plasma (ACP) with three types of gas. The jet-type atmospheric cold plasma wand system was used with a 30 W power supply, and three gases (argon, air, and nitrogen) were applied as the treatment gas. The operating parameters for process optimization considered were wheat flour mass (g), treatment time (min), and gas flow rate (L/min). The wheat flour samples were artificially contaminated with E. coli at a concentration of 9.25 ± 0.74 log CFU/g. ACP treatments with argon, air, and nitrogen resulted in 2.66, 4.21, and 5.55 log CFU/g reduction of E. coli, respectively, in wheat flour under optimized conditions. The optimized conditions to reduce E. coli were 0.5 g of the flour mass, 15 min of treatment time, and 0.20 L/min of nitrogen gas flow rate, and the predicted highest reduction level from modeling was 5.63 log CFU/g.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.310-316
• /
• 2009

In this study, the influence of pressure assisted mild thermal inactivation (PAMTI) on E. coli ATCC 10536 was examined at 200 MPa and temperature range of $20-50^{\circ}C$. Inactivation rate significantly increased (p<0.05) as temperature and time increased at 200 MPa. The maximum inactivation (7.91 log reduction) was obtained at $50^{\circ}C$ for 30 min under 200 MPa, which meant the complete inactivation of E. coli ATCC 10536. Inactivation kinetics were evaluated with the first order inactivation rate (k), activation energy ($E_a$), thermal death time (TDT), and z value. Kinetic parameters were significantly (p<0.05) influenced by variation temperature of PAMTI. In this study, the synergistic effect of pressure and temperature were found in the inactivation of E. coli ATCC 10536 through PAMTI.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.219-226
• /
• 2000

Amorphous Ge20As20Se60 chalcogenide thin films were prepared by spin coating technique from mixed solutions of As40Se60 and Ge40Se60 dissolved in ethylenediamine. Films were prepared at a roating speed of 3500 rpm and spinning time was 10 second and heat-treateed at 27$0^{\circ}C$ for 1 hour. The resulting film thickness and RMS roughness were approximately 340 nm and 15$\AA$. Photostructure changes were investigated with 514.5nm Ar+ laser irradiation and heat-treatment. After Ar+ laser irradiation, transmittance and transmission efficiency decreased respectively up to 24.9% at 2.43 eV and 67.5% at 3.27 eV, and absorption edge shifted toward long wavelength. Optical bandgap changed from 2.03 to 1.83 eV, and absoprtion coefficient and absorption efficiency increased up to 0.33$\times$105cm-1 at 3.37eV and 88.3% at 1.31 eV, respectively. These photodarkening state were recovered reversibly by heat-treatment at 27$0^{\circ}C$ for 1 hour. Photodarkening and thermal bleaching effects by laser irradiation and heat-treatment revealed reversible amorphous-to-amorphous transition varying only coordination number.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2007

Titanium was oxidized with oxygen plasma and calcinated with rapid thermal annealing for degradation of humic acid dissolved in water. Titania photocatalytic plate was produced by titanium surface oxidized with oxygen plasma by Plasma Enhanced Chemical Vapor Deposition (PECVD). RF-power and deposition condition is controlled under 100 W, 150 W, 300 W and 500 W. Treatment time was controlled by 5 min and 10 min. The film properties were evaluated by the X-ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD). From the experimental results, we found the optimal condition of titania film which exhibited good performance. Moreover photocatalytic capacity was about twice better than thermal spray titania film, and also as good as titania powder.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.209-218
• /
• 2022

Individuals often report significant relief from pain and stress even after a single session of massage therapy; however, no previous studies have provided objective evidence supporting the effectiveness of a solitary massage therapy session. In the present study, we aimed to investigate the effectiveness of one-time treatment with a spinal thermal massage device reported to exert the same therapeutic effects as massage therapy in terms of pain reduction and stress relief. A man with chronic low back pain (LBP) underwent two rounds of experiments involving spinal massage treatment and bed rest, respectively. Pain was assessed using a visual analog scale, and heart rate variability (HRV) was measured in real-time to examine autonomic nervous system (ANS) activity. Blood samples were obtained at five points during each round of the experiment to examine changes in cortisol, epinephrine, and norepinephrine. Spinal massage significantly reduced pain and enhanced parasympathetic activity when compared with the bed rest condition. In addition, both epinephrine and norepinephrine levels were lower following spinal massage than following bed rest. These results are consistent with the reported effects of conventional massage therapy and support the effectiveness of one-time treatment using a spinal thermal massage device.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.471-485
• /
• 2018

Post-heat treatment experiments were carried out for complete dimensional stabilization of thermally compressed wood (Pinus koraiensis). An absorption test was carried out to evaluate the dimensional stability. The specific gravity increased from 0.43 to 0.79 by thermal compression at a compression ratio of 50% thickness. Through the post-heat treatment of compressed wood, the water absorption and thickness swelling decreased with increasing the heat treatment temperature and time. In the case of the thickness recovery rate, when the heat treatment was performed for 24 hours at $120^{\circ}C$, $140^{\circ}C$ and $160^{\circ}C$, the thickness recovery was less than 1%. Therefore, it can be confirmed that the method of dimensional stabilization method of the thermal compression wood can be carried out very effectively through post heat treatment process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.27-39
• /
• 2019

In this study, thermal-alkali pre-treatment (THAP) optimal condition and co-digestion efficiency with THAP of the mixture food waste and sewage sludge were evaluated for improving the performances of co-digestion for mixed food waste and sewage sludge. The optimal condition of THAP was evaluated for solubilization COD, CST(Capillary Suction Time), TTF(Time to Filter), and volatile fatty acids (VFAs) with THAP temperature and NaOH concentration. In addition, the co-digestion of mixed food waste and sewage sludge were evaluated using biochemical methane potential (BMP) test. The optimal THAP reaction temperature and NaOH concentration of food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L to solubilization COD over 20%, CST and TTF under 60sec and VFAs concentration over 12,000 mg-COD/L, respectively. The optimal condition of co-digestion of mixed food waste and sewage sludge equal to THAP condition. Therefore, it was determined that the optimal condition of THAP reaction temperature and NaOH concentration for co-digestion of mixed food waste and sewage sludge were $140^{\circ}C$ and 60 meq/L, respectively.

• Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.21-26
• /
• 2015

Seasoned laver Pyropia spp. is a traditional Korean seafood that has gained popularity worldwide because of its unique taste, texture, and health benefits. It is prepared by roasting a sheet of dried laver, to which vegetable oils have been applied, at an ultra-high temperature (UHT) of $300^{\circ}C$. Therefore, the oxidative stability of the oils is the most important factor in determining the shelf life of seasoned laver products. In this study, we investigated changes in the thermal oxidative stability of six major vegetable oils (sesame, perilla, sunflower, rice bran, canola, and olive) during the seasoned laver processing. The oxidation induction time of each oil from the seasoned laver products was decreased compared with the fresh oil. These results indicate that the UHT treatment ($300^{\circ}C$, 10 s) induced thermal oxidation of the oils. Among the six seasoned laver oils, the induction times of olive (OL, 8.02 h) and sesame (SE, 5.31 h) oils were significantly higher than the other oils. The acid values (AVs) of OL and SE oils from the seasoned laver were 0.49 and 0.79, respectively. On the other hand, perilla oil had the overall worst thermal oxidative properties (induction time: 0.35 h, AV: 2.82). Our results provide useful information about seasoned laver products for researchers or manufactures.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.3
• /
• pp.43-52
• /
• 2013

In this study, various influent sludge pre-treatment methods were adopted to investigate their effects on the sludge digestion and methane production in combined mesophilic anaerobic and thermophilic aerobic sludge digestion process. A lab-scale sewage sludge digestion process was operated during 4 phases using different feed sludge pre-treatment strategies. In phase 1, feed sludge was supplied without any pre-treatment. In contrast, in phases 2, 3 and 4, thermal, thermal-alkaline and long time alkaline treatment (7 days) were applied to influent sludge, respectively. With sludge pre-treatment, TCOD removal was drastically increased from 44% to 76% from phases 1 to 4, respectively. Also, pre-treatment of feed sludge significantly improved the methane production rate of MAD, showing an increment from 101 to 165-256mL/L/day. Meanwhile, TCOD removal and methane production at phase 4 were not increased, compared to those at phase 3. Based on the experimental results, it was concluded that pre-treatment of feed sludge significantly increases the efficiency of sludge digestion and thermal-alkaline method was the most effective method among the pre-treatment methods examined.