• Environmental and Resource Economics Review
• /
• v.24 no.2
• /
• pp.311-342
• /
• 2015

We evaluate two main rationales of massive policy intervention of Lee Administration in the Korean transportation fuel market: high market share of domestic refineries, perceived by the Administration as the result of high market concentration, and asymmetry in price adjustment, perceived as the result of collusion. Domestic refineries, huge in capacity and located at seaports, maintain international competitiveness in price. Considering market openness offering preferential treatment to importers, they set domestic prices competitively on the basis of MOPS prices. Yet, the price competitiveness of domestic refineries is so high that they are able to sustain high market share. We confirm that the Korean before-tax consumer prices of gasoline and diesel are lower than Japan's and the weighted averages of 27 EU countries by as much as 159KRW and 21KRW per liter in the case of gasoline and 170KRW and 63KRW in the case of diesel. Price asymmetry is caused by diverse economic and managerial reasons and, as FTC (2005) states, price asymmetry does not immediately imply exercise of market power or collusion. We analyzed price asymmetry in Korea, Japan and 14 EU countries, and found asymmetry in Korea and 11 EU countries in the case of gasoline and in Korea and 8 EU countries in the case of diesel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.21-30
• /
• 2012

When two bands have different look angle in a space-borne camera system, the registration between two bands is required. The registration cannot be modeled with constant parameters because of dynamic of platform and parallax effect. The parallax effect is caused by terrain relief, hence it causes local distortion between two bands. Therefore, the terrain relief correction in order to reduce the parallax effect is required for better registration result, especially for high resolution image data. Such terrain relief correction also can be applied to image data acquired from multiple detectors with different look angle within a band, which is a one of commonly used configuration for a wider swath in space-borne camera system, in order to reduce the distortion between detectors. The RFM is a popular abstract model in remote sensing field, which gives us the relationship between the image plane and geodetic coordinate system. Therefore, we propose a terrain relief correction method based on the RFM. The experiment showed very promising result.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.59-72
• /
• 2008

Computing systems in the modern era are expanding rapidly to include mobile-based businesses that make us of the various convergence distributed business process. This has lead to growing interest in the field of mobile embedded software development methodology, which has in turn lead to the proliferation of the embedded mobility. The use of CBD (Component Based Development) provides reusability, maintainability and portability, all of which are very important and focus issues to the business process. It also comes with the inherent productivity, quality and reliability of CBD. To make efficient use of CBD, though, clarified interface definitions for component integration are necessary. These definitions should be made up of collaborative hierarchical and horizontal architecture layers. Successful definitions should apply an effective framework made up of the architecture and process. In this paper, we describe an interface specification for small grained mobile embedded components(MEC) for the mobile embedded domain to meet maximum user requirements. We build and deploy the reconfigurable design patterns and components (in business domain categories) to make a component hierarchy and business logics for mobile embedded software. Proposed components specification plays a major role in development of the software for handling inconsistency in existing specification. It also includes plenty of specification information, using semantics and modeling based mechanisms to support business processes. We propose a development model of mobile embedded software using CBD for very complex and dynamic mobile business. We can apply it in a plug and play manner to develop the software. We verify that our framework supports very good productivity, quality and maintainability to meet the user's requirements in mobile business.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2017

In a reciprocating compressor, the piston and connecting rod are important parts. Excess mechanical stress on these parts may cause damage, and broken parts are expensive and difficult to replace. Therefore, it is necessary to analyze the mechanical stress affecting durability and longevity. The main purpose of this study was to identify locations of maximum stress on pistons and connecting rods. Based on dynamic calculation of the working process of a specific air compressor, an analysis of piston and connecting rod performance has been completed. A three-dimensional model for the air compressor's pistons and connecting rods was built separately, and FEM analysis of these components was carried out using a numerical method. The pistons were loaded by pressure which was changed according to crankshaft angle without thermal boundary conditions. The simulation results were used to predict and estimate stress concentration as well as the value of this stress on pistons and connecting rods. The maximum equivalent stress calculated are over 190 MPa on pistons and 123 MPa on connecting rods at crank angle $135^{\circ}$ and $225^{\circ}$ but these are under tensile yield strength. Besides, the calculated safety factors of connecting rods and pistons is higher than 1. Moreover, the results obtained can be used to provide manufacturers with references to optimize the design of pistons and connecting rods for reciprocating compressors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.345-355
• /
• 2015

Climate change impact on urban drainage system are analyzed in Seoul by using high-resolution climate change scenario comparing 2000s (1971~2000) with 2020s (2011~2040), 2050s (2041~2070) and 2080s (2071~2100). The historical hourly observed rainfall data were collected from KMA and the climate change scenario-based hourly rainfall data were produced by RegCM3 and Sub-BATS scheme in this study. The spatial resolution obtained from dynamic downscaling was $5{\times}5km$. The comparison of probability rainfalls between 2000s and 2080s showed that the change rates are ranged on 28~54%. In particular, the increase rates of probability rainfall were significant on 3, 6 and 24-hour rain durations. XP-SWMM model was used for analyzing the climate change impacts on urban drainage system. As the result, due to the increase of rainfall intensities, the inundated areas as a function of number of flooded manhole and overflow amounts were increasing rapidly for the 3 future periods in the selected Gongneung 1, Seocho 2, Sinrim 4 drainage systems. It can be concluded that the current drainage systems on the selected study area are vulnerable to climate change and require some reasonable climate change adaptation strategies.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.64-72
• /
• 2017

The longitudinal dynamic instability which can occur in the fueling process of a space launch vehicle is called pogo. It is caused by coupling between the fuselage and propulsion system and they would be formed as a closed-loop system. so that the amplitude of the response may increase or decrease. In this paper, a mathematical model which is applicable to the systematic pogo analysis of a general launch vehicle is developed for an example of space shuttle. The formulations are composed of the linearized second-order differential equation for the propulsion system, and of the pressure, weight displacement, and generalized displacement. Those are important parameters for pogo analysis, are derived through eigenvalue analysis. By the formulation suggested in this paper, it is expected that mathematical modeling method of the pogo system can be obtained and systematic pogo stability analysis for any launch vehicle will be enabled.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.10
• /
• pp.363-372
• /
• 2022

Since the recent COVID-19 Pandemic, the ransomware fandom has intensified along with the expansion of remote work. Currently, anti-virus vaccine companies are trying to respond to ransomware, but traditional file signature-based static analysis can be neutralized in the face of diversification, obfuscation, variants, or the emergence of new ransomware. Various studies are being conducted for such ransomware detection, and detection studies using signature-based static analysis and behavior-based dynamic analysis can be seen as the main research type at present. In this paper, the frequency of ".text Section" Opcode and the Native API used in practice was extracted, and the association between feature information selected using K-means Clustering algorithm, Cosine Similarity, and Pearson correlation coefficient was analyzed. In addition, Through experiments to classify and detect worms among other malware types and Cerber-type ransomware, it was verified that the selected feature information was specialized in detecting specific ransomware (Cerber). As a result of combining the finally selected feature information through the above verification and applying it to machine learning and performing hyper parameter optimization, the detection rate was up to 93.3%.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.129-142
• /
• 2022

Nutrition dictates nearly all biological processes and determines Darwinian fitness in all living organisms, including insects. Research on insect nutrition has a long history in the field of insect physiology and the importance of understanding insect nutrition has become increasingly apparent with the growing need for producing insects as food and feed. Nevertheless, it is only in recent years that we have witnessed a major breakthrough in our knowledge of insect nutrition. The multivariate, interactive, and dynamic nature of nutrition has long hampered our complete understanding of insect nutrition. However, the challenge posed by such nutritional complexity has been overcome with the advent of the Nutritional Geometry, which is an integrative and multidimensional framework that enabled us to model complex interactions between multiple nutrients. In this review, we introduce the basic concepts and principles of the Nutritional Geometry and describe how this innovative framework has revolutionized the field of insect nutrition and has placed nutrition in the centre of the interface between physiology, ecology, and evolution. We close this review by discussing potentially fertile research areas that can benefit tremendously from the application of this powerful nutritional paradigm in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.127-134
• /
• 2020

High supersonic aircraft are exposed to high temperature environments by aerodynamic heating during supersonic flight. Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by supersonic aircraft's high power engine noise and jet flow noise, which can cause sonic fatigue damage. Therefore, it is necessary to examine the behavior of supersonic aircraft skin structure under thermal-acoustic load and to predict fatigue life. In this paper, we designed and fabricated thermal-acoustic test equipment to simulate thermal-acoustic load. Thermal-acoustic testing of the titanium specimen under thermal-acoustic load was performed. The analytical model was verified by comparing the thermal-acoustic test results with the finite element analysis results.