• Annual Conference of KIPS
• /
• 2002.11c
• /
• pp.2285-2288
• /
• 2002

PDAs와 같은 휴대용 컴퓨터의 발전은 펜을 이용한 데이터 입력과 처리 기술에 대한 요구를 증가시키고 있다. 하지만 대부분의 PDAs용 애플리케이션들은 키보드와 마우스를 주된 입력 도구로 사용하는 데스크 탑 컴퓨터의 GUI와 입력 방식을 그대로 사용하고 있다. 본 논문에서는 펜 기반의 휴대용 컴퓨터에서 필기체 데이터 문서를 편집할 수 있도록 해주는 펜 제스쳐(pen gesture)기능 허용 텍스트 에디터를 개발하였다. 삽입, 삭제, 앞뒤 낱말 바꾸기, 줄 바꾸기 등의 제스쳐 인식 방법과 제스쳐 처리를 위해 스트록들(strokes)을 GCs(Gesture Components) 단위로 그룹화하기 위한 방법들을 제안하였다. 제스쳐 허용 에디터의 개발은 펜 기능만으로 문서 편집을 위한 모든 작업을 가능하게 해 줌으로 사용자의 편의를 극대화시켜 준다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.25.1-25.1
• /
• 2010

본 연구에서는 절연막에 삽입시킨 실리콘 나노와이어 유연소자를 제작하고 그 소자의 전기적 특성을 분석하여 유연소자로서의 적합성을 평가하였다. 최근 반도체 및 디스플레이 등이 다양한 현장에 응용되면서 유연성을 이용한 소자의 필요성이 대두되고 있다. 이러한 요구를 바탕으로 나노와이어를 유연소자에 적용시키기 위하여 삽입방법을 이용하여 field-effect transistor(FET) 소자를 제작하였다. 유연소자의 기판으로는 polyimide(PI) 및 poly(ethylene 2,6 naphtahalate)(PEN)을 사용하였고, 절연막은 poly-4-vinylphenol(PVP)을 이용하였으며 이때, 나노와이어는 무전해 식각법으로 합성한 실리콘 나노와이어를 사용하였다. 이렇게 제작된 유연소자를 휨 상태 및 삽입된 정도에 따른 전기적 특성을 비교하였고 휨 테스트를 통하여 소자의 안정성을 분석하였다. 전기적 특성은 I-V 측정을 통하여 Ion/Ioff ratio, 이동도, subthreshold swing, threshold voltage값 등을 평가하였다.

• Journal of Surface Science and Engineering
• /
• v.52 no.5
• /
• pp.239-245
• /
• 2019

To increase the throughput of tip-based nanolithography (TBN), one approach is to use a large array of such tips working in parallel. It is important to maintain co-planarity between the tip array and the writing surface. A slight misalignment can cause large discrepancies of contact force and feature sizes. We report a capacitive proximity sensor built-in with the TBN array for leveling an arrayed polymer pen array. The device allows alignment between an array of writing tips and the writing substrate without contact and contamination. The angular sensitivity of the sensor is $0.05^{\circ}$ for an array with maximum tip-to-tip separation of 100 mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.447-450
• /
• 2014

In this paper efficient design of wireless tablet system using GalaxyNote device for PC was proposed. The designed portable tablet consists of GalaxyNote device, Stylus Pen, and Bluetooth-to-serial converter. To transmit coordinate information of Stylus Pen on GalaxyNote device to PC, wireless portable tablet uses bluetooth wireless communications. After the custom mouse filter driver divides received coordinate into x-coordinate and y-coordinate, it controls position of mouse pointer using the converted coordinates while Windows application programs are running.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1991

In order to secrete the Bacillus subtilis cytidine deaminase (CDase, cytidine/2'-deoxycytidine deaminase) encoded by the B. subtilis cdd gene in E. coli by the aid of signal sequences, the cdd gene was fused in-frame to either amyE or penP signal sequences and the gene expression and CDase localization were examined. For the penP signal sequence::cdd fusion, the cdd gene with 9 amino acids truncated from the 5'-terminus was fused in-frame to the signal sequence, then the $cdd^{+}$ colonies were not occurred from the minimal plate by cdd complementation. The result suggests that 9 amino acids on the $NH_2-terminal$ of CDase have an essential function in the enzyme activity. The hybrid protein obtained by fused gene amyE signal sequence::cdd structural gene gave $cdd^{+}$ phenotype and about half of the total CDase activity was found to be secreted in the periplasm of E. coli transformant JF611/pSO202. The periplasmic CDase activity of JF611 harboring pSO52 containing the intact cdd gene was considerablely lower than that of the cells harboring pSO202 carrying the hybrid cdd gene. This suggests that the CDase was secreted to the periplasm through the cytoplasmic membrane by the aid of the amyE signal sequence in the E. coli transformant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.640-645
• /
• 2020

To produce an input device stably using the transparent electromagnetic pattern of an electromagnetic induction method, pattern inspection is required in advance in the production process. Various methods of inspecting the capacitive pattern for hand-touch have been proposed, but it is difficult to find the related technical data for the pattern inspection method of the transparent electromagnetic induction method. In this study, to develop an inspection system for a fused electromagnetic resonance pen sensor with a copper-etched metal mesh pattern, an inspection algorithm and method for measuring the antenna impedance inside the sensor was proposed by measuring only the exposed FPCB connector. The proposed method was configured as a control board consisting of a microprocessor that forms a loop between specific channels according to the command of a computer, a computer-controlled by the Windows program, an LCR meter measuring the impedance between specific channels, and transmitting the measurement results back to the computer. An evaluation of the proposed system and measurements of nine specimens showed that it could detect the defects of the sensor used in the actual product.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.870-878
• /
• 2012

Recently, very rapid development of computer and sensor technologies induces various kinds of user interface (UI) technologies based on user experience (UX). In this study, we investigate and develop a smart touch projector system technology on the basis of IR sensor and image processing. In the proposed system, a user can control computer by understanding the control events based on gesture of IR pen as an input device. In the IR image, we extract the movement (or gesture) of the devised pen and track it for recognizing gesture pattern. Also, to correct the error between the coordinate of input image sensor and display device (projector), we propose a coordinate correction algorithm to improve the accuracy of operation. Through this system technology as the next generation human-computer interaction, we can control the events of the equipped computer on the projected image screen without manipulating the computer directly.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.3
• /
• pp.379-388
• /
• 2020

As the use of credit cards increases, security threats increase. In particular, despite being vulnerable to related crimes, such as fraudulent use of credit cards and theft of names, there are virtually no security procedures to authenticate the validity of user while paying with the credit card. In order to overcome these limitations of current credit card payments, we add a process of signing payment using a stylus pen with built-in acceleration sensor in the existing transaction method, and classifying and comparing the image of the signature and signature information measured by the sensor through the convolutional neural network. we propose a method to improve security in financial transactions by performing the user authentication process through the possession of the stylus pen and the characteristic values of the signature.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.733-738
• /
• 2012

The effect of glass bead and glass fiber on the enhancement of dimensional stability in poly(ethylene naphthalate) (PEN) flexible substrate for photovoltaic devices has been studied. It was found that the coefficient of thermal expansion (CTE) and the optical transmittance decreased with increasing inorganic filler content. In addition to filler contents, the size and size distribution of fillers are the other important factors to improve CTE and optical transmittance of PEN film. Our results showed that the optimum filler content was found to be about 5 wt% to enhance the dimensional stability of PEN by more than 50% with maintaining the optical transmittance over 85% for the flexible substrate.

• The Korean Journal of Malacology
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2002

The distribution and density of the pen shell, Atrina (Servatrina) pectinata japonica, were investigated to estimate population ecological parameters and biomass. Samples were collected during cruises from April to June 1999 in the coastal waters of Chungchung-namdo, Korea. The oceanographic conditions such as depth, temperature, transparency and suspended solids were measured from sampling stations. Seawater depth ranged from 3.9 m to 75.9 m and the mean was 28.5 m (SE = 0.97). The mean density of the pen shell was higher in the depth of 18.0-30.8 m. The water temperature of the bottom ranged from 7.0-21.5$^{\circ}C$ and the mean was 14.$0^{\circ}C$. The transparency ranged from 1.2-13.5 m and the mean was 4.8 m. The suspended solids ranged from 6.0-93.5 mg/l and the mean was 48.0 mg/l. The sand proportion of the sediment was > 50%. The mean densities of the pen shell by sediment type were 7.3 individuals/40 m$^2$ (SE = 2.16) in the sand, 5.6 individuals/40 m$^2$ (SE = 1.48) in the muddy sand, 3.0 individuals/40 m$^2$(SE = 1.89) in the sandy mud, and none in the mud. The sandy bottom, accounting for 29.8% of the overall habitat area, had a maximum density of 7.3 individuals/40 m$^2$.