• 제목/요약/키워드: test procedures

검색결과 1,849건 처리시간 0.022초

캘리포니아 표준 테스트 방법을 사용한 압전 발판의 경제성 분석 (Economic Analysis of the Piezoelectric Power using the California Standard Test)

  • 정순성
    • 동력기계공학회지
    • /
    • 제21권4호
    • /
    • pp.51-56
    • /
    • 2017
  • The purpose of this study is to suggest economic analysis for piezoelectric power. Economic analysis method uses california standard test. Perspectives of california standard test is participant test, ratepayer impact measure test, program administrator cost test and total resource cost test. This study identifies the cost and benefit components. This study identifies benefit-cost calculation procedures from four test : participant test, ratepayer impact measure test, program administrator cost test and total resource cost test. In the economic analysis, the order of benefit cost ratio in piezoelectric power shows total resource cost test, program administrator cost test, ratepayer impact measure test and participant test.

함정사업 시험평가의 효율적 수행방안에 관한 연구 (A Study on Efficient Test & Evaluation Methods in Naval Ship Acquisitions)

  • 김재용;최원석;홍석윤;정현균;송지훈;임우석;권현웅
    • 한국군사과학기술학회지
    • /
    • 제19권6호
    • /
    • pp.703-711
    • /
    • 2016
  • The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

태안 비행장과 김포공항 비행시험을 통한 ILS와 GBAS 비교 (Comparison of ILS and GBAS Through Flight Test in Taean Aerodrome and Kimpo Airport)

  • 구본수;김우리얼;주요한;홍교영
    • 한국항행학회논문지
    • /
    • 제19권3호
    • /
    • pp.192-198
    • /
    • 2015
  • 현재 대부분의 공항에서 운용중인 계기착륙시스템 (ILS; instrument landing system)은 시스템 특성상 단일경로로 운영되어, 다수의 항공기를 수용하기에는 한계가 있다. 이러한 한계점을 해결하기 위해 GNSS를 이용한 위성항법시스템인 GBAS가 개발되었다. GBAS는 ILS 보다 위치 정확도도 높고 단일경로가 아닌 다수의 경로를 이용하여 착륙이 가능하기 때문에, 다양한 착륙절차를 수행할 수 있다. 이에, 본 논문에서는 환경적인 요건과 공역 제한 때문에 ILS 설치가 불가피한 태안비행장에 가상 ILS 절차를 수립한 후 cessna skyhawk 172를 이용하여 가상 ILS 절차와 curved approach 절차를 비교하는 비행시험을 하여 curved approach에 대한 장점을 확인 하였다.

선박의 격벽, 천정, 내장재 및 표면바닥재의 화재안정성 평가방법 (Fire test procedures for flammability of bulkhead, ceiling and deck finish materials)

  • 김성윤;김동석;안병호;곽지현
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.117-119
    • /
    • 2008
  • 해상에서의 화재로부터 사람의 목숨과 재산을 보호하는 것은 대단히 중요하다. 따라서, "격벽, 천장, 갑판 마감재의 표면 연소성에 대한 개선된 화재시험절차에 관한 권고"는 선박의 격벽, 천정, 갑판 마감재의 연소특성을 결정짓기 위한 근거로써 화재 특성 및 그 재료들을 해상구조물에 사용함에 있어서 적합성을 측정하기 위한 절차를 규정하고 있다. 이 논문에서는 선박의 격벽, 천정, 내장재 및 표면바닥재의 화재안정성 평가방법을 제시하고 그 적정성을 평가하고자 한다. 또한 특이한 거동을 보이는 물질을 조사하고, 그 물질들의 적합한 시험방법을 제시하고자 한다.

  • PDF

탄성파를 이용한 철도노반의 다짐관리 방안 (A Compaction Control Procedure of Railway Trackbed Fills Using Elastic Waves)

  • 박철수;박인범;오상훈;김학성;목영진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.1427-1439
    • /
    • 2008
  • The quality of track-bed fills of railways has been controlled by field measurements of density (${\gamma}_d$) and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of $OMC{\pm}2%$ as well as the p-wave velocity.

  • PDF

Adjustment of a Studentized Test Statistic and a Normalized Test Statistic in a Simple Linear Structural Relationship

  • Chang, Kyung
    • 품질경영학회지
    • /
    • 제21권2호
    • /
    • pp.156-161
    • /
    • 1993
  • Limiting distributions of Studentized test statistics have been shown for testing the slope parameter in a simple linear structural model. Since the limiting distribution of Studentized one appears to yield inaccurate inference, this paper suggests adjustment of critical value and normalization of the Studentized one. As results, we can have procedures for refined inference based on our approximate distrbution instead of the limiting distribution.

  • PDF

혼합중도중단에 의한 Weibull분포의 신뢰도에 관한 검정의 연구 (A Study of Test for the Reliability of Weibull Distribution Using Hybrid Censoring)

  • 염준근;함형범
    • 품질경영학회지
    • /
    • 제20권1호
    • /
    • pp.48-58
    • /
    • 1992
  • This paper deals with a test procedures on reliablity using hybrid censoring when failure time follows two parameter Weibull distribution. In each case of single and two stage test with hybrid censoring, we construct a operating characteristic curve, and then obtain the censoring number and sample size which the producer's risk and the consumer's risk are both satisfied. This study suggests to determine the expected waiting time at a decision.

  • PDF

Rank Test for Ordered Alternatives under Random Censorship

  • Gyu-Jin Jeong;Sang-Gue Park
    • Communications for Statistical Applications and Methods
    • /
    • 제3권3호
    • /
    • pp.195-204
    • /
    • 1996
  • Some rank tests for comparing r treatments against ordered alternatives are proposed when some of data are randomly cemsored, which are the weighted logrank tests based on pairwise-ranking scheme. The covariances of the proposed test statistics are explicitly obtained from the results of the counting process theory and the test procedures are illustrated by a numerical example. Simulation studies are also performed for comparing with the other well-known tests.

  • PDF

Test of Symmetry against Near Type III Positive Biasedness

  • Oh, Myong-Sik
    • 한국통계학회:학술대회논문집
    • /
    • 한국통계학회 2003년도 추계 학술발표회 논문집
    • /
    • pp.63-68
    • /
    • 2003
  • One of the widely accepted assumptions in many statistical problem is that the underlying distribution is symmetric. Though a large number of nonparametric test are available in the literature for this problem, very few procedures focuses on the distributional structure when the symmetry assumption is rejected. Yanagimoto and Sibuya (1972) provided the various types of asymmetric distributional structure, positive biasedness, namely. In this paper we consider the test of symmetry against several new positive biasedness restrictions which are stronger than Yanagimoto and Sibuya's type II bias but weaker than type IV (III) bias.

  • PDF

NONPARAMETRIC ONE-SIDED TESTS FOR MULTIVARIATE AND RIGHT CENSORED DATA

  • Park, Hyo-Il;Na, Jong-Hwa
    • Journal of the Korean Statistical Society
    • /
    • 제32권4호
    • /
    • pp.373-384
    • /
    • 2003
  • In this paper, we formulate multivariate one-sided alternatives and propose a class of nonparametric tests for possibly right censored data. We obtain the asymptotic tail probability (or p-value) by showing that our proposed test statistics have asymptotically multivariate normal distributions. Also, we illustrate our procedure with an example and compare it with other procedures in terms of empirical powers for the bivariate case. Finally, we discuss some properties of our test.