• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.758-760
• /
• 1997

For feeder automation function, we must have Fault Indicator with the information of fault current flowing inside automatic feeder switches. In this paper, we introduce the algorithm of feeder automation, the theory of fault indicator, the result with some troubles of field test in real distribution system and contents of improvement.

• 제어로봇시스템학회논문지
• /
• 제11권10호
• /
• pp.880-887
• /
• 2005

This paper presents a fault diagnosis(detection and isolation) approach for the Ammunition Transport Automation system(ATAS). Due to limited time and information available during its cyclic operation, the on-line fault detection algorithm consists of sequential test logics referring to the normal states, which can be considered as a kind of expert system. If a failure were detected, the off-line isolation algorithm finds the fault location through trained ART2 neural network. By the results of simulations and some on-line field test, it has been shown that the presented approach is effective enough and applicable to related automation systems.

• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.129-134
• /
• 2013

기존 연구실 연구에서는 메타모델 기반의 순차적 다이어그램을 통한 테스트케이스 생성의 자동화가 초점이었다. 하지만 메타모델 기반의 스테이트 다이어그램을 통한 테스트케이스 자동 생성에 관한 메커니즘에 관한 연구가 부족하다. 그래서 본 논문에서는 Model Driven Architecture(MDA) 메커니즘인 메타모델과 모델변형기법을 채택하여, UML내 스테이트 다이어그램을 통해 테스트케이스를 자동 추출메커니즘을 제안한다. 이를 위해 테스트케이스 생성단계 프로세스를 정의하고 각 단계별 메타모델 정의와 모델간의 변형 규칙을 정의한다. 제안한 기법을 통해 임베디드 소프트웨어 테스트 설계 및 테스트케이스 추출비용과 시간을 줄이고 임베디드 소프트웨어의 품질을 높이고자 한다.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.59-66
• /
• 2008

디지털 기술 기반의 차세대 변전시스템의 시스템 성능 검증을 위해 변전소 전력설비의 보호에 있어 가장 중요한 보호요소 중 하나인 차단기 실패 보호 IED를 대상으로 하는 IEC 61850 시스템 성능 시험 절차서를 구현하였다. 디지털 변전소에 대한 통신규격이 단일화되고 시스템이 디지털화됨에 따라 IED들은 상호 통신이 가능해지게 되었으며, 따라서 단일 IED의 전기 접점을 통해 이루어지던 예전의 시험방식에서 네트워크를 통한 시스템 차원의 시험방식으로 변화가 필요하게 되었다. 본 논문에서는 차단기 실패 보호 IED를 시스템적으로 시험할 수 있도록 UML을 이용한 성능시험절차서의 구현내용을 보여주고자 한다.

• 비파괴검사학회지
• /
• 제5권1호
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.746-756
• /
• 2018

Harmonic resonance exists in grid-connected inverter systems. In order to determine the network components that contribute to harmonic resonance and the composition of the resonant circuit, sensitivity theory is applied to the resonance characteristic analysis. Based on the modal analysis, the theory of sensitivity is applied to derive a formula for determining the sensitivities of each network component parameter under a resonance circumstance that reflects the participation of the network component. The solving formula is derived for both parallel harmonic resonance and series harmonic resonance. This formula is adopted to a 4-node grid-connected test system. The analysis results reveal that for a certain frequency, the participation of parallel resonance and series resonance are not the same. Finally, experimental results demonstrate that the solving formula for sensitivity is feasible for grid-connected systems.

• Journal of Astronomy and Space Sciences
• /
• 제26권4호
• /
• pp.635-642
• /
• 2009

This paper describes the Flight Dynamics Automation (FDA) system for COMS Flight Dynamics System (FDS) and its test result in terms of the performance of the automation jobs. FDA controls the flight dynamics functions such as orbit determination, orbit prediction, event prediction, and fuel accounting. The designed FDA is independent from the specific characteristics which are defined by spacecraft manufacturer or specific satellite missions. Therefore, FDA could easily links its autonomous job control functions to any satellite mission control system with some interface modification. By adding autonomous system along with flight dynamics system, it decreases the operator's tedious and repeated jobs but increase the usability and reliability of the system. Therefore, FDA is used to improve the completeness of whole mission control system's quality. The FDA is applied to the real flight dynamics system of a geostationary satellite, COMS and the experimental test is performed. The experimental result shows the stability and reliability of the mission control operations through the automatic job control.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.292-301
• /
• 2002

Ultrasound waves interact strongly with the orientation and sequence of the plies in a layup when propagating in the thickness direction of composite laminates. Also the layup orientation greatly influences its properties in a composite laminate. If the layup orientation of a ply is misaligned, it could result in the part being rejected and discarded. Now, most researchers cut a small coupon from the waste edge and use a microscope to optically verify the ply sequences on important parts. This may add a substantial cost to the production since the test is both labor intensive and performed after the part is cured. A nondestructive technique would be very beneficial, which could be used to test the part after curing and requires less time than the optical test. Therefore we have developed, reduced, and implemented a novel ply-by-ply vector decomposition model for composite laminates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. High probability is found, by comparisons between the model and tests, in characterizing cured layups of the laminates by using the proposed method.

• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.339-344
• /
• 2019

본 논문에서는 주택 전기 과부하로 인한 전기화재 피해를 최소화할 수 있는 스마트 주택 자동화를 위한 DSP 기반의 디지털 주택 과부하 경보기를 실험 제작하였다. 그리고 주택 과부하 경보 기술의 유효성을 검증하기 위해서 인공적으로 과부하를 발생시킬 수 있는 하나의 전기 과부하 경보 성능 평가 시스템을 설계, 개발, 구축하고, 과부하 시험을 통해 개발된 주택 과부하 경보기의 유효성을 검증하였다. 특히, EMTP-RV를 이용하여 과부하 시험 모델을 개발하고 과부하 시험을 모의, 계측결과와 비교함으로서 과부하 성능 검증결과의 신뢰성을 확인하였다.

• 한국통신학회논문지
• /
• 제19권2호
• /
• pp.202-210
• /
• 1994

본 논문에서는 Flexible Automation을 위한 네트워크 운영과 관리체제를 분석하고 이에따른 요구사항을 고려하여 네트워크 관리 시스템을 설계하였다. 네트워크 관리기능은 자원을 제어하고 관리하는 필수적인 기능으로, 관리 서비스를 제공할 수 있는 방법과 관리구조를 제안하고 해석적 방법과 큐잉모델을 이용하여 전송 데이터의 증가에 따른 지연시간 분포를 구하고 성능을 분석한다. 성능관리를 위한 성능을 측정하고 그 결과를 분석하여 설계된 관리시스템의 운영에 대한 타당성을 확인하였다.