• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제23권10호
• /
• pp.75-80
• /
• 2009

In order to prevent loss of communication packets and drop of transmission speed owing to the network fault occurrence, it should be considered network redundancy. That is why a messages of IED GOOSE is the critical signal in charge of protection and control of the substation. So most of users implement the substation automation system with Hybrid network topology ant IED supporting double ethernet ports. Because IEC 61850 GOOSE conformance test is limited in the functional test, this paper suggests how to test the performance of IED GOOSE transmission considering Network redundancy, and describes the analysis of an example test on real IEDs and how to impact the IED GOOSE performance to the substation automation system.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1621-1631
• /
• 2005

In this paper, making the best use of the features of the electro-rheological (ER) valve, a two-port pressure control valve using ER fluids is proposed and manufactured. The ER-Valve characteristics are evaluated by changing the intensity of the electric field and the number of electrode. As only with electrical signal change to the ER-Valve in which ER fluid flowing, ER fluid flow is controlled, so development of simple ER-Valves have been tried. The ER-Valves and pressure drop check method are considered to be applied to the fluid power industry. Using the manufactured pressure control valve, a one-link manipulator with FHA (Flexible Hydraulic Actuator) is driven. As a result, it is experimentally confirmed that the pressure control valve using ER fluids is applicable to use in driving actuator. If it applies characteristics of the ER fluids, it will be able to apply in the control system for the ER Valve which occurs from industrial controller. After having durability test, shear stress increased regularly because of starch particles crushed by pump and particle size that was almost the same. Moreover, Ra of copper electrode increased about 1.56 times rather than before those of performing durability test, and Rz increased about 2.2 times.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(A)
• /
• pp.158-161
• /
• 2011

웹 UI 자동화 테스트 환경 구축하여 운영할 때, 현실적으로 어려움이 있다. 자동화 셋을 구축하는데 초기 투자비용이 많이 들고, 구축한 흐름에도 유지보수 비용이 많이 발생한다. 또한 필요시 바로 실행될 수 있는 자동화 셋을 통합 관리하려면 많은 공수가 투입되어야 한다. 본 논문에서는 웹 UI 자동화 테스트시 발생하는 이런 어려움들을 효과적으로 해결할 수 있는 키워드 기반 웹서비스 UI 테스트 자동화 프레임웍 (kUTAF: Keyword based web service UI Test Automation Framework) 을 소개한다. kUTAF은 웹 구성요소와 사용자 행위를 도메인 지정 언어로 매핑시킨 키워드를 사용해 테스트케이스를 작성하여 자동화 테스트를 수행하고, 작성된 자동화 테스트 셋을 효과적으로 통합 관리하는 프레임웍이다. kUTAF을 적용하면 자동화 셋의 유지보수가 쉬워지고, 커뮤니케이션 비용이 감소하고, 자동화 테스트를 통합 관리하는 부문에서 많은 효과를 볼 수 있다.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.501-504
• /
• 2004

There is a world-wide trend to implement autonomous TM/TC system in satellite operations. KARI developed CALS(Command AutoLoader System) for KOMPSAT-1 operation automation in 2004. This paper provides system requirement, system design, system test and operational procedure. Through test with simulator and KOMPSAT-1, CALS was verified to meet all functional and operational requirement like scheduling, real-time telemetry check, CRC generation, command grouping. CALS is expected to be used in KOMPSAT-1 normal mission operation in end of 2004

• Journal of the Korean Society for Precision Engineering
• /
• 제32권3호
• /
• pp.243-251
• /
• 2015

In order to develop an automatic system for welding thin steel plates with curvature such as the corrugated membranes of an LNG storage tank, a rotating mechanism should be firstly designed for the torch to easily follow the weld seam with a constant distance and angle. In this study, a torch rotating mechanism consisting of three circular links, two square-type links and a torch link was proposed for automation of the welding process. A weld-seam tracking system with two axis slides and the proposed rotating mechanism was successfully simulated with a dynamic simulation software. A prototype tracking system was manufactured and a tracking test with the system was then carried out. The test results with tracking system showed that the rotating mechanism could be implemented and it was feasible to be used in automatic tracking of weld seam with curvature.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.161-163
• /
• 1997

Heatcycle testing for aluminum connector is very important. But because of connecting or disconnecting the test circuit, measuring resistance is difficult. Also the previous measuring resistance instrument is analog type. So measuring method is difficult. And four measuring points for one test circuit cause difficulty in automation. In this paper we developed the automatic system for measuring resistance. Automation will allow more information to be gathered, which will lead to the connector aging process being better understood and controlled.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 한국컴퓨터정보학회 2018년도 제57차 동계학술대회논문집 26권1호
• /
• pp.25-28
• /
• 2018

본 논문에서는 강화학습을 통한 게임 테스트 자동화를 제안한다. 게임 테스트의 일부가 게임을 플레이라는 것과 강화학습에 기반을 둔 인공 신경망 모델들이 게임플레이에 많은 성과를 거둔 것에 착안하여 테스트 케이스 자동 생셩 및 기계학습을 통한 테스트 자동화를 연구하였다. 테스트 관리자를 두어 게임 요소에 필수적인 테스트 케이스를 데이터 조합으로 생성하고, 테스트 케이스를 수행할 인공지능을 기계학습으로 작성하여 자동화 유지비용을 절감한다. 이 모델을 소형 게임에 시험적으로 적용하였고, 정상 작동을 확인하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.259-262
• /
• 2009

IEC 61850 based substation automation system mainly consists of human machine interface and a various of IEDs in charge of protective and control functions of the substation. Both of them should require the performance verification of IEC 61850 communication services because their communication relation is the same as client and server throughout the digital network. This paper shows a research result on the testing method of basic communication interface of the IEC 61850 based client, which was implemented by the analysis of real communication between HMI and IED of IEC 61850 based substation automation system and refereed to IED IEC 61850 conformance test procedures.

• Structural Engineering and Mechanics
• /
• 제22권1호
• /
• pp.17-32
• /
• 2006

The application of cellular materials in load-carrying and security-relevant structures requires the exact prediction of their mechanical behavior, which necessitates the development of robust simulation models and techniques based on appropriate experimental procedures. The determination of the yield surface requires experiments under multi-axial stress states because the yield behavior is sensitive to the hydrostatic stress and simple uniaxial tests aim only to determine one single point of the yield surface. Therefore, an experimental technique based on a uniaxial strain test for the description of the influence of the hydrostatic stress on the yield condition in the elastic-plastic transition zone at small strains is proposed and numerically investigated. Furthermore, this experimental technique enables the determination of a second elastic constant, e.g., Poisson's ratio.

• The KIPS Transactions:PartD
• /
• 제13D권2호
• /
• pp.215-222
• /
• 2006

The importance of mobile software test is being addressed to improve the productivity and reliability of the software. Test automation technique based on mobile platform is required for effective application of mobile software test. That is, a technique is needed to generate test case for mobile platform API. When test case generated, software productivity and reliability are improved, while test duration and cost are decreased. In this paper, we identified test case generation scope through previous works about test automation, suggested keyword driven method, a test case generation technique on J2ME platform, and recognized that proposed method can be applicable to generating test case based on J2ME platform.