• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.2
• /
• pp.223-233
• /
• 2023

Gauss Sieve is an algorithm for solving SVP and requires exponential time and space complexity. The terminationcondition of the Sieve is determined by the size of the constructed list and the number of collisions related to space complexity. The term 'collision' refers to the state in which the sampled vector is reduced to the vector that is already inthe list. if collisions occur more than a certain number of times, the algorithm terminates. When executing previous algorithms, we noticed that unnecessary operations continued even after the shortest vector was found. This means that the existing termination condition is set larger than necessary. In this paper, after identifying the point where unnecessary operations are repeated, optimization is performed on the number of operations required. The tests are conducted by adjusting the threshold of the collision that becomes the termination condition and the distribution in whichthe sample vector is generated. According to the experiments, the operation that occupies the largest proportion decreased by62.6%. The space and time complexity also decreased by 4.3 and 1.6%, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.815-824
• /
• 2005

In this paper, we proposed a new DGS(Defected Ground Structure) Doherty amplifier for IMT-2000 band. Originally, active load-pull analysis of a Doherty amplifier assumes ideal harmonic termination condition. However, there have been no papers considering this ideal harmonic termination condition. We obtained excellent improvements of efficiency, gain, maximum output power as well as superior size reduction of a Doherly amplifier by satisfying the overlooked assumption of ideal harmonic termination through the adaptation of DGS at the output transmission line of carrier and peaking amplifier that is essential for Doherty operation. The amount of both the 2nd and the 3rd harmonic rejection of the proposed DGS Doherty amplifier over the conventional one are 44.92 dB and over 23.77 dB, respectively. The acquired improvement in Pl dB, gain, drain efficiency, and ACPR to WCDMA 1FA signal were 0.42 dB, 0.33 dB, $6.4\%$ and 5.4 dBc, respectively. Moreover, electrical length of $90{\circ}$ is reduced at each of the DGS carrier amplifier path and DGS peaking amplifier path, therefore the whole amplifier circuit size is considerably reduced.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1210-1212
• /
• 2005

High temperature superconducting(HTS) power cable system consists of HTS cable, termination and cryogenic system. And the HTS cable consists of the former, HTS phase conductor, electric insulation, HTS shield and cryostat. Taking the advantage of HTS shield, the cold dielectric has been adopted. The phase conductor and the shield have been designed to minimize the AC loss below 1W/m/phase. The former has been designed to transport the fault current of 25kA, at fault condition. This paper describes the design process of 22.9kV HTS cable considering AC losses at normal state and the stability at fault condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.2
• /
• pp.268-275
• /
• 2003

Generally, structural optimization is carried out based on external static loads. All forces have dynamic characteristics in the real world. Mathematical optimization with dynamic loads is extremely difficult in a large-scale problem due to the behaviors in the time domain. The dynamic loads are often transformed into static loads by dynamic factors, design codes, and etc. Therefore, the optimization results can give inaccurate solutions. Recently, a systematic transformation has been proposed as an engineering algorithm. Equivalent static loads are made to generate the same displacement field as the one from dynamic loads at each time step of dynamic analysis. Thus, many load cases are used as the multiple leading conditions which are not costly to include in modern structural optimization. In this research, it is mathematically proved that the solution of the algorithm satisfies the Karush-Kuhn-Tucker necessary condition. At first, the solution of the new algorithm is mathematically obtained. Using the termination criteria, it is proved that the solution satisfies the Karush-Kuhn-Tucker necessary condition of the original dynamic response optimization problem. The application of the algorithm is discussed.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.2
• /
• pp.159-162
• /
• 2012

The Chinese windmill butterfly, Atrophaneura alcinous, is an important butterfly for exhibition in butterfly garden. The objective of this study was to determine the effect of temperature on A. alcinous in the laboratory. Development of A. alcinous reared on leaves of Aristolochia contorta was investigated at five constant the laboratory condition (20, 22.5, 25, 27.5 and $30^{\circ}C$) and at relative humidity of 60% with a photoperiod of 14:10 (L:D). Temperatures have been suggested as an important determinant of developmental rate, lifespan and mortality in invertebrates. As the temperature increased, the length of the developmental period gradually decreased. The developmental time (pupation) from egg hatching to pupation was respectively 25.8, 23.6, 19.6, 15.5, and 12.9 days at the temperatures of 20, 22.5, 25, 27.5 and $30^{\circ}C$. And pupation was respectively 40.0, 30.0, 63.4, 50.0, 23.3% at the temperatures of 20, 22.5, 25, 27.5 and $30^{\circ}C$. The developmental threshold temperature estimated for egg-to-pupae was 10.8, with a thermal constant of 230.4 degree-days. Therefore, the optimal developmental temperature for A. alninous was determined to be $25^{\circ}C$. To compare the effects of the total duration of chilling on the termination of diapause, larvae were subjected to a temperature of $8^{\circ}C$ from 60 to 120 days. The rate of termination of diapause was significantly higher at 60 days compared to other incubation period.

• Journal of Distribution Research
• /
• v.9 no.3
• /
• pp.21-47
• /
• 2004

This study has investigated the effects of relieving and promoting factors on dissolution intention under the condition of low commitment buyer-seller relationships. Based on intensive literature reviews, eight alleviating factors (dependence, cooperation, communication, relational norms, transaction specific investments, relationship termination costs, satisfaction, and trust) and five promoting factors (opportunism, conflict, goal incongruity, attractiveness of alternatives, and unfairness) were included. A total of thirteen hypotheses were testee using data collected from a dining franchising system. Among 300 collected, 79 cases of low commitment buyer-seller relationships were analyzed. The results showed that eight out of thirteen hypotheses were supported. But five hypotheses related to the variables of cooperation, transaction specific investments, relationship termination costs, attractiveness of alternatives, and opportunism were not supported. following a detailed presentation of the analysis results, the paper concludes by discussing the academic and managerial implications of the findings.

• Physical Therapy Korea
• /
• v.10 no.4
• /
• pp.43-59
• /
• 2003

보행 종료(gait termination)는 인간의 보행개시(gait initiation)나 율동성 보행(rhythmical walking)에 비해 관심을 적게 받고 있다. 파킨슨 환자들이 보행종료와 방향전환 시 가지는 어려움은 이들 환자들이 보행 시 넘어지게 되는 노출 요인으로 보고되어져 왔다. 보행종료에 대한 기전의 이해는 효과적으로 걸음을 멈추지 못해 넘어지게 되는 위험요인을 가진 사람들에게 적용되어질 수 있다. 이 논문에서 우리는 보행종료에 대한 최근문헌을 고찰하고 우리 실험실에서 진행되어온 파킨슨환자의 보행종료에 관한 일련의 실험들의 결과를 요약하였다. 본 연구는 율동적인 보행상태에서 완전한 멈춤으로의 전환에서 일어나는 동역학의 변화를 검사하기위해 시행되었다. 보행속도가 증가함에 따라 따르는 다리(trailing limb; 보행종료시점에서 뒤에 위치하는 다리)의 유의한 가속력 감소가 나타나고 멈출 때 이끄는 다리(leading limb; 보행종료시점에서 앞에 위치한 다리)에서 유의한 감속력의 증가가 나타난다. 보행종료 시, 이끄는 다리의 뒤쪽에 질량중심(center of mass) 을 유지시키기 위해 하지 신전근의 활성도가 오래 지속되어져야 한다. 예측하지 못한 상황에서 보행종료 시, 보행 중이나 예측되어진 상황에서 멈출 때보다 이끄는 다리 아래에서 감속력이 빠르게 발생하는 경향을 보였다. 대상자들을 보행속도에 따라 두 군으로 나눌 때, 계획되지 않은 보행종료를 하는 동안 보행속도가 느린 군이 빠른 군보다 전방 가속력을 급속하게 증가시키는 것으로 나타났다. 이러한 결과들은 보행속도가 느린 대상자들이 따르는 다리로 힘을 생성하기 보다는 주로 이끄는 다리에 의존하여 보행종료를 하는 것을 보여준다. 따르는 다리에서 발생되는 힘과 근육활성도의 조절을 측정하기 위하여, 파킨슨 환자와 연령에 의해 짝짓기된 정상 환자군에게 표적 조건(target condition)을 추가하였다. 파킨슨 환자군은 표적에 다리를 정확히 놓기 위해 몇 발자국 전부터 보행 속도를 줄였다. 파킨슨 환자들은 보행종료를 촉진하기 위해 필요한 근육들의 활성도를 증가시키는데 큰 어려움을 가지고 있다고 생각되어진다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1065-1071
• /
• 2010

In this paper, we proposed a novel harmonic load circuit to design a high efficiency class-F amplifier. The proposed load circuit controls termination impedances to enhance the efficiency of class-F power amplifier. The termination impedances at the 2nd and the 3rd harmonics are showed short and open condition, respectively. Also, a fabricated load circuit showed an attenuation characteristic more than 29 dB, that is enough to eliminate harmonics of the class-F power amplifier. The measured drain and power-added efficiency are 75.7 % and 71.3 % at the point of maximum output power 35.17 dBm.

• Congress of the korean instutite of fire investigation
• /
• 2010.12a
• /
• pp.63-79
• /
• 2010

It is found to the arc trace on the junction termination of 345kV cable. According to the analysis of the cable material is judged to be good. Manufacturing and design problems are not considered. In construction defects, it was estimated to the low level of insulation oil. In the majority of the arc trace appeared XLPE is found. However, there is no Soots mark, yellow band has not been confirmed, not associated with a radial arc of the spider leg is not evidence. In other opinions, void, contamination or jut are not found on the inside of XLPE. Thus, by the attachment of the impurities in surface of XLPE insulation is judged to the breakdown.