• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1346-1354
• /
• 2002

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.195.2-195.2
• /
• 2011

The borehole heat exchanger of Geothermal Heat Pump (GHP) system should be sustainable and cost effective for long term operation. To guaranty the performance of the system thermal Response Tests (TRTs) with simple recommended procedures have been applied in many countries. Korea government developed a standard TRT procedure in order to control the quality on GHP projects. In the TRT procedure interpretation method has a rule that data set has to be interpreted by the line source model(LSM). The LSM employes some assumptions that surrounding medium is homogeneous and the line source is infinite and constant heat flux, however real ground condition is unisotropic and heterogeneous, and showing regional or local ground water flows in many cases. We need to develope improved evaluation models to estimate accurate ground thermal conductivity with respect to geological and influence of ground water because current TRT standard test procedure has limitations to be applied for every locations and system. This study surveyed the uncertainty of the thermal parameters from the interpretation method considering different evaluation period. The interpretation of 208 TRT data sets represents limitations of LSM application that some obtained ground thermal conductivities are statistically unstable and convergence time of ground thermal conductivity over test period shows trends responding the length of test period. This evaluation study will be helpful to provide some effective procedure for the thermal parameter estimation and to complement current TRT standard procedure.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.320-325
• /
• 2016

This paper presents a robust finite-time sliding mode control (SMC) scheme for unknown disturbance and unmodeled nonlinear friction and dynamics in the robotic manipulator. A finite-time SMC (FSMC) surface and finite-time sliding mode controller are constructed to obtain faster error convergence than the conventional infinite-time based SMC. By adding prescribed constraint control term to a finite-time SMC to compensate for unknown disturbance and uncertainties, a robust control scheme can be designed as well as faster convergence control. In addition, simpler controller structure is built by using feed-forwarding upper bound coefficients of each manipulator dynamic parameters instead of model-based control or adaptive observer to estimate unknown manipulator parameters. Simulation and experimental evaluations highlight the efficacy of the proposed control scheme for an articulated robotic manipulator.

• 한국사회복지학
• /
• 제49권
• /
• pp.34-61
• /
• 2002

Recently, the concept of empowerment has become popular within social work practice. Despite of this trends, we have little empirical knowledge about what empowerment practice is and how it is applicable to practice settings in Korea. This study explored how social workers perceived and experienced the concept of empowerment. We used qualitative method to solve this questions. Individual and focus group interviews were conducted to 7 social workers serving in diverse settings. Research results are as follows: Participants had common perceptions of empowerment concept despite of the different settings. They perceived power as confidence, independence, self-control. The client/worker relationships were open, nonhierarchial egalitarian and characterized by mutuality and reciprocity. They emphasized the nature of empowerment as circular and diffusive process. Also, they orientated long term practice related to impatience of social workers. Finally, those who participated in this study challenged and reinterpreted the existing traditional "professionalism". We concluded that empowerment practice might demand infinite energies, social worker's creativity, trust of clients, and that empowerment practice would be a new approach in social work practice which influence on much more population because of its diffuseness.

• 응용통계연구
• /
• 제17권1호
• /
• pp.105-117
• /
• 2004

본 논문에서는 선형추세를 갖는 모집단의 평균을 추정하기 위한 새로운 방법을 제시하였다. 이 방법은 변형계통추출에 의하여 표본을 뽑은 뒤 표본의 단순평균이 아니라 조정된 추정량을 사용하여 모평균을 추정하는 방법이다. 조정된 추정량을 정하는 데에 최소제곱법을 사용하였다. 제시된 방법은 선형 추세가 강할수록 효율적이라는 것이 밝혀졌으며, 무한초모집단 모형의 랜덤오차항의 분산인 $\sigma$$^2$이 매우 크지만 않다면 전통적인 방법들에 비해 상대적으로 효율적인 것으로 나타났다.

• 한국학교수학회논문집
• /
• 제11권1호
• /
• pp.31-54
• /
• 2008

수학적 사고력이 학생 스스로 문제를 해결하는 과정에서 가장 발달한다는 주장과 함께 이를 구현하는 방법론에 대한 연구도 꾸준히 이루어져왔다. 최근에 그 방법론으로 몰입적인 사고를 통한 학생의 학습 방법이 제안되었다. 이에 본 연구에서는 몰입적인 사고를 적용하여 학생들이 스스로 수학문제를 해결해 나갈 수 있는지를 알아보았다. 연구는 고등학교 교과과정인 미적분에 대한 선행학습을 하지 않은 중학교 3학년 학생들 10명을 대상으로 몰입적 사고를 통해서 학생 스스로 미적분 문제를 해결할 수 있는지와 그 과정에서 학생이 경험하는 수학학습 성취에 대한 탐구로 진행되었다. 학생들은 주어진 미적분 문제를 3일 동안 몰입적 사고를 적용하여 풀었다. 그 결과 2명이 스스로 해결하였고 7명이 힌트를 받고 해결하였다. 연구 결과 상당수의 학생이 장시간의 몰입적인 사고를 통하여 배우지 않은 문제들을 스스로의 능력으로 해결할 수 있음을 알게 되었다. 이 과정에서 학생들의 수학적 사고력이 발달되었고 학생들은 수학하는 즐거움과 성취감을 경험했을 것으로 기대되었다. 본 연구 결과는 몰입적 사고를 도입함으로써 교실에서 학생들 스스로 문제를 푸는 교수법의 개발에 하나의 가능성을 제시하였다고 볼 수 있으며 몰입을 통한 훈련으로 수학적 사고력 발달을 통한 실제 문제해결력에도 기여할 수 있음을 시사하고 있다.

• 한국경영과학회지
• /
• 제34권2호
• /
• pp.1-13
• /
• 2009

In this paper, we develop theoretical game models to determine the level of government subsidies for banks to provide policy loans to Innovative SMEs(small and medium sized enterprises) through banks, which otherwise would not finance them for the sake of their own profitability. For this, we compare net cash flows of each bank using different strategies against high risk innovative SMEs. A bank can decide whether to provide them loans or not In each period. Following Kim(2003)'s Infinite horizon model on the soft budget constraint, we introduce a situation in which banks compete against each other for higher net long-term payoffs from their loans to innovative SMEs and non-innovative SMEs. From the models, we show that competition among banks in general leads to a tighter decision against innovative SMEs, as a Nash equilibrium. It is not because the government bank is simply loose in providing loans, but because competition among commercial banks for fewer riskier borrowers results in tighter loan decisions against innovative SMEs. Thus, the competitive market for policy loans to innovative SMEs fails to reach the socially optimal level of loans for innovative SMMs. Commercial banks in the competitive market may require additional supports from the government to make up for the differences in their payoffs to support innovative SMEs, possibly much riskier due to moral hazards and poor discounted cash flows. The monopolistic government bank might also request such supports from the government to fund otherwise unqualified SMEs. We calculate an optimal level of governmental support for banks to guarantee funding such high-risk innovative SMEs over periods without deviating from their optimal Nash equilibrium policies.

• 한국주거학회논문집
• /
• 제21권3호
• /
• pp.115-124
• /
• 2010

The environment which has been destroyed for the national growth since 1960's would seem to offer infinite resources to human, but now, the existence of human being is threatened by the development thoughtless for the environment. The World Powers have concentrated on green growth with eco-friendly resource since the end of 20th century. Korea suggested that the vision was the low carbon for green growth in 2008. It is necessary to supply Long-Life Housing in the green technology in terms of the sustainable housing development based on various life style, life cycle of the residences, the restrain remodeling and redevelopment in construction. This study is aim to establish the development of maintenance process to make continuous inhabitation of Long-Life Housing that has the separated SI for maintenance, durability, variability and remodeling. The maintenance for Long-Life Housing is very important to have more than 50~70 years the long term of life cycle in comparison with Housing. Also, the roles of manager and user are important parts in Long-Life Housing. The present maintenance for Housing is shift and repair works by the routine maintenance and demage. However, The maintenance for Long-Life Housing should consider movement and flexibility. In addition, Long-Life Housing requires the proper process of maintenance because it is different from Housing in housing concept, design and constructions stage. Therefore this study shows the efficient maintenance process for Long-Life Housing.

• 한국통신학회논문지
• /
• 제29권12A호
• /
• pp.1387-1395
• /
• 2004

Log-MAP 복호 알고리즘을 사용하는 터보 복호기는 뛰어난 복호 성능에도 불구하고, 반복적 연산으로 인하여 인터리버의 크기에 비례하는 많은 메모리와 높은 하드웨어 복잡도가 단점으로 지적된다. 이에 본 논문에서는 Log-MAP 복호 알고리즘 기반의 터보 복호기를 설계할 때 복호 성능 및 하드웨어 복잡도에 영향을 미칠 수 있는 다양한 설계 이슈들을 제시하고, 설계 이슈들의 변화에 따른 복호 성능을 모의실험을 통하여 비교 분석한다. 하드웨어 복잡도와 복호 성능간의 균형을 고려하여 수신정부 사전정보, 상태 메트릭을 각각 5 비트, 6 비트 그리고 7 비트로 할당하여 부동 소수점 연산의 비트오율에 근접하는 성능을 확인하였다. Log-MAP 복호 알고리즘의 주연산인 MAX*에 대한 하드웨어 복잡도와 복호 성능을 비교 분석하였다. MAX* 연산 중 계산도가 큰 오류 보정 함수를 근사화된 조합회로로 구성하여 하드웨어 부담을 줄일 수 있는 방법을 제시하였고, 윈도우 블록 길이가 32인 슬라이딩 윈도우 기법을 적용하여 적은 복호 성능 저하로 상태메트릭 저장에 필요한 메모리 공간을 감소할 수 있음을 확인하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.