• Journal of Mechanical Science and Technology
• /
• v.16 no.10
• /
• pp.1346-1354
• /
• 2002

The purpose of this work is to study the effects of specularly reflecting wall under the combined radiative and laminar free convective heat transfer in an infinite square duct. An absorbing and emitting gray medium is enclosed by the opaque and diffusely emitting walls. The walls may reflect diffusely or specularly. Boussinesq approximation is used for the buoyancy term. The radiative heat transfer is evaluated using the direct discrete ordinates method. The parameters under considerations are Rayleigh number, conduction to radiation parameter, optical thickness, wall emissivity and reflection mode. The differences caused by the reflection mode on the stream line, and temperature distribution and wall heat fluxes are studied. Some differences are observed for the categories mentioned above if the order of the conduction to radiation parameter is less than order of 10$\^$-3/ fer the range of Rayleigh number studied. The differences at the side wall heat flux distributions are observed as long as the medium is optically thin. As the top wall emissivity decreases, the differences between these two modes are increased. As the optical thickness decreases at the fixed wall emissivity, the differences also increase. The difference of the streamlines or the temperature contours is not as distinct as the side wall heat flux distributions. The specular reflection may alter the fluid motion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.195.2-195.2
• /
• 2011

The borehole heat exchanger of Geothermal Heat Pump (GHP) system should be sustainable and cost effective for long term operation. To guaranty the performance of the system thermal Response Tests (TRTs) with simple recommended procedures have been applied in many countries. Korea government developed a standard TRT procedure in order to control the quality on GHP projects. In the TRT procedure interpretation method has a rule that data set has to be interpreted by the line source model(LSM). The LSM employes some assumptions that surrounding medium is homogeneous and the line source is infinite and constant heat flux, however real ground condition is unisotropic and heterogeneous, and showing regional or local ground water flows in many cases. We need to develope improved evaluation models to estimate accurate ground thermal conductivity with respect to geological and influence of ground water because current TRT standard test procedure has limitations to be applied for every locations and system. This study surveyed the uncertainty of the thermal parameters from the interpretation method considering different evaluation period. The interpretation of 208 TRT data sets represents limitations of LSM application that some obtained ground thermal conductivities are statistically unstable and convergence time of ground thermal conductivity over test period shows trends responding the length of test period. This evaluation study will be helpful to provide some effective procedure for the thermal parameter estimation and to complement current TRT standard procedure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.320-325
• /
• 2016

This paper presents a robust finite-time sliding mode control (SMC) scheme for unknown disturbance and unmodeled nonlinear friction and dynamics in the robotic manipulator. A finite-time SMC (FSMC) surface and finite-time sliding mode controller are constructed to obtain faster error convergence than the conventional infinite-time based SMC. By adding prescribed constraint control term to a finite-time SMC to compensate for unknown disturbance and uncertainties, a robust control scheme can be designed as well as faster convergence control. In addition, simpler controller structure is built by using feed-forwarding upper bound coefficients of each manipulator dynamic parameters instead of model-based control or adaptive observer to estimate unknown manipulator parameters. Simulation and experimental evaluations highlight the efficacy of the proposed control scheme for an articulated robotic manipulator.

• Korean Journal of Social Welfare
• /
• v.49
• /
• pp.34-61
• /
• 2002

Recently, the concept of empowerment has become popular within social work practice. Despite of this trends, we have little empirical knowledge about what empowerment practice is and how it is applicable to practice settings in Korea. This study explored how social workers perceived and experienced the concept of empowerment. We used qualitative method to solve this questions. Individual and focus group interviews were conducted to 7 social workers serving in diverse settings. Research results are as follows: Participants had common perceptions of empowerment concept despite of the different settings. They perceived power as confidence, independence, self-control. The client/worker relationships were open, nonhierarchial egalitarian and characterized by mutuality and reciprocity. They emphasized the nature of empowerment as circular and diffusive process. Also, they orientated long term practice related to impatience of social workers. Finally, those who participated in this study challenged and reinterpreted the existing traditional "professionalism". We concluded that empowerment practice might demand infinite energies, social worker's creativity, trust of clients, and that empowerment practice would be a new approach in social work practice which influence on much more population because of its diffuseness.

• The Korean Journal of Applied Statistics
• /
• v.17 no.1
• /
• pp.105-117
• /
• 2004

In this paper, a new method is developed for estimating the mean of a population which has a linear trend. This method involves drawing a sample by the modified systematic sampling, and then estimating the population mean with an adjusted estimator, not with the sample mean itself. We use the method of least squares in determining the adjusted estimator. The proposed method is shown to be more and more efficient as the linear trend becomes stronger. It turns out to be relatively efficient as compared with the conventional methods if $\sigma$$^2$the variance of the random error term in the infinite superpopulation model, is not very large.

• Journal of the Korean School Mathematics Society
• /
• v.11 no.1
• /
• pp.31-54
• /
• 2008

The discovery method is known to be the most effective in improving students' mathematical thinking. Recently, the long-term slow thinking(LST) is suggested as a possible method to implement the discovery method into the real classroom. In this concept, we examined whether students can solve such a problem, as appears to be beyond their ability, by themselves(LST) or not. 10 middle school students of the ninth grade were selected for the study, who had no previous experience on the infinite concept of calculus of the high school course. They had tried to solve a problem about the calculus by their LST for three days. Two of students solved the problem by themselves and seven of students solved it with help of hints. This result shows that if students are given the opportunity of LST for rather difficult mathematical problem with appropriate guidance of a teacher, they might solve it by themselves. That is, LST could be a possible method for implementation of the discovery method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.2
• /
• pp.1-13
• /
• 2009

In this paper, we develop theoretical game models to determine the level of government subsidies for banks to provide policy loans to Innovative SMEs(small and medium sized enterprises) through banks, which otherwise would not finance them for the sake of their own profitability. For this, we compare net cash flows of each bank using different strategies against high risk innovative SMEs. A bank can decide whether to provide them loans or not In each period. Following Kim(2003)'s Infinite horizon model on the soft budget constraint, we introduce a situation in which banks compete against each other for higher net long-term payoffs from their loans to innovative SMEs and non-innovative SMEs. From the models, we show that competition among banks in general leads to a tighter decision against innovative SMEs, as a Nash equilibrium. It is not because the government bank is simply loose in providing loans, but because competition among commercial banks for fewer riskier borrowers results in tighter loan decisions against innovative SMEs. Thus, the competitive market for policy loans to innovative SMEs fails to reach the socially optimal level of loans for innovative SMMs. Commercial banks in the competitive market may require additional supports from the government to make up for the differences in their payoffs to support innovative SMEs, possibly much riskier due to moral hazards and poor discounted cash flows. The monopolistic government bank might also request such supports from the government to fund otherwise unqualified SMEs. We calculate an optimal level of governmental support for banks to guarantee funding such high-risk innovative SMEs over periods without deviating from their optimal Nash equilibrium policies.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.115-124
• /
• 2010

The environment which has been destroyed for the national growth since 1960's would seem to offer infinite resources to human, but now, the existence of human being is threatened by the development thoughtless for the environment. The World Powers have concentrated on green growth with eco-friendly resource since the end of 20th century. Korea suggested that the vision was the low carbon for green growth in 2008. It is necessary to supply Long-Life Housing in the green technology in terms of the sustainable housing development based on various life style, life cycle of the residences, the restrain remodeling and redevelopment in construction. This study is aim to establish the development of maintenance process to make continuous inhabitation of Long-Life Housing that has the separated SI for maintenance, durability, variability and remodeling. The maintenance for Long-Life Housing is very important to have more than 50~70 years the long term of life cycle in comparison with Housing. Also, the roles of manager and user are important parts in Long-Life Housing. The present maintenance for Housing is shift and repair works by the routine maintenance and demage. However, The maintenance for Long-Life Housing should consider movement and flexibility. In addition, Long-Life Housing requires the proper process of maintenance because it is different from Housing in housing concept, design and constructions stage. Therefore this study shows the efficient maintenance process for Long-Life Housing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1387-1395
• /
• 2004

Turbo decoder inherently requires large memory and intensive hardware complexity due to iterative decoding, despite of excellent decoding efficiency. To decrease the memory space and reduce hardware complexity, various design issues have to be discussed. In this paper, various design issues on Turbo decoder are investigated and the tradeoffs between the hardware complexity and the performance are analyzed. Through the various simulations on the fixed-length analysis, we decided 5-bits for the received data, 6-bits for a priori information, and 7-bits for the quantization state metric, so the performance gets close to that of infinite precision. The MAX operation which is the main function of Log-MAP decoding algorithm is analyzed and the error correction term for MAX* operation can be efficiently implemented with very small hardware overhead. The size of the sliding window was decided as 32 to reduce the state metric memory space and to achieve an acceptable BER.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.