• Journal of Korean Society of Archives and Records Management
• /
• v.7 no.1
• /
• pp.83-109
• /
• 2007

This paper focuses on the Bijombon Haerampeon written by Lee Eonjin The analysis of the paper is associated with the following: i) the career of Lee Eonjin ; ii) the manuscripts and collected works of Lee Eonjin ; iii) Haerampeon ; iv) Lee Yeonghyu and Nam Ok ; v) and the comparison of the Bijombon Haerampeon and Haerampeon carried in Songmokkwanjip and Songmokkwansinyeogo. Lee Eonjin(1740-1766) was a great poet and better known as one of the four great interpreters in Chosun dynasty. Woosangingbok was the only manuscripts handed down up to now among the works of Lee Eonjin. Woosangingbok ran the Bijombon Haerampeon, 6 pieces of itinery, 3 pieces of poem, 5 pieces of letter. Lee Eonjin visited Japan from the 6th of October, 1763 to the 20th of June in 1764 as a member of Tongsinsa in attendance upon Cho Om. He wrote Haerampeon vividly with five characters what he observed during his stay in Japan. It was composed on board of Ilkido from the 28th of May to the 8th of June in 1746. After Lee Yeonghyu and Nam Ok reviewed Haerampeon, Lee Yeonghyu placed a blue point and circle and Nam Ok placed a red point and circle. Ultimately the result raised the value of Haerampeon. Haerampeon is to be divide into four parts. Four parts are described below: the first part, the geographic features and products of Japan; the second part, the grow of Osaka city and the cityward tendency of world products; the third part, the racial prejudice, religion, and life; and the fourth part, the good neighborly relations with Japan. Finally, as compared with the proofing and difference of three kinds of text, namely, the Bijombon Haerampeon and Haerampeon carried in Songmokkwanjip and Songmokkwansinyeogo, it is approved that the Bijombon Haerampeon is the most correct text and has the value of cultural properties as a national treasure. The Result of this research will be contributed for research Lee Eonjin and utilized as information resources in the field of bibliographic science, Korean language and literature, and historical studies, etc.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.114-121
• /
• 2010

Traditional temples in Korea are the important cultural heritage because of artistic traditonal buildings and structures, paintings, sculptures, and big forest areas which are most ecological and beautiful in Korea. Since traditional temples still function as religious places for very long time, the sense of places intrinsic to the temples are very strong and vivid. The sense of place is very closely related to the conservation of the original landscape type. Recently however, there is a strong tendency to use solar energy in traditional temples because of the low energy efficiency of the old traditional architecture which may have negative impact on landscape which again in turn may lead to the destruction of the sense of place. The purpose of this study was to suggest some landscape design guidelines to protect the sense of place of traditional temple by investigating the impact of solar energy facility on the landscape experience of traditional temple. In order to do perform this purpose, Tongdosa was selected as a study site and four kinds of measurement tools(landscape image, temple identity, landscape satisfaction, degree of landscape improvement) were used as questionnaire items. 180 college students participated in the questionnaire survey. The analysis showed that the solar energy facility had very negative impact on landscape experience such as three landscape image factors(scenic beauty, openness, complexity), landscape satisfaction, temple identity, and landscape improvement. Based on the results, three landscape improvement plans were suggested. First, solar energy facility should be built in the forest in order not to be exposed to visitors, if possible. Second, the landscape management of traditional temple should emphasize on sustaining scenic beauty and temple identity along with the provision of openness. Lastly, detailed landscape guideline should be prepared to regulate the scale, ratio, and the form of the artificial buildings and structures to protect the sense of place of traditional temple.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.109-120
• /
• 2017

A discounted cost model for preventive maintenance of armor units of rubble-mound breakwaters is mathematically derived by combining the deterioration model based on a discrete-time stochastic process of shock occurrence with the cost model of renewal process together. The discounted cost model of condition-based maintenance proposed in this paper can take into account the nonlinearity of cumulative damage process as well as the discounting effect of cost. By comparing the present results with the previous other results, the verification is carried out satisfactorily. In addition, it is known from the sensitivity analysis on variables related to the model that the more often preventive maintenance should be implemented, the more crucial the level of importance of system is. However, the tendency is shown in reverse as the interest rate is increased. Meanwhile, the present model has been applied to the armor units of rubble-mound breakwaters. The parameters of damage intensity function have been estimated through the time-dependent prediction of the expected cumulative damage level obtained from the sample path method. In particular, it is confirmed that the shock occurrences can be considered to be a discrete-time stochastic process by investigating the effects of uncertainty of the shock occurrences on the expected cumulative damage level with homogeneous Poisson process and doubly stochastic Poisson process that are the continuous-time stochastic processes. It can be also seen that the stochastic process of cumulative damage would depend directly on the design conditions, thus the preventive maintenance would be varied due to those. Finally, the optimal periods and scale for the preventive maintenance of armor units of rubble-mound breakwaters can be quantitatively determined with the failure limits, the levels of importance of structure, and the interest rates.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.35-41
• /
• 1969

In order to determine proper ratio of wheat to soybean of soysauce koji material for Korean people's taste, sensory evaluation for the soysauces made from soysauce kojis with various above-mentioned ratio and analysis of chemical components through the brewing period of six months were carried out. The results obtained were summarized as follows: 1. The specific gravity of all the soysauces increased gradually as the time passed and had maximum values in two months with nearly constant values thereafter. Concerning soybean/wheat-ratio, generally, the higher soybean/wheat-ratio, the lower specific gravity was observed but when this ratio was higher than 10 : 6, the gravity was on the similar levels. 2. The solid material in all the soysauces increased in the earlier stage and there were no significant differences among the treatments but soysauces without wheat had a little low content. 3. The lesser amount of wheat as raw material was, the higher contents of total nitrogen were and the contents of total nitrogen in the every ratio of raw material increased parallely as the mash ages. 4. The amino-nitrogen levels were found to have the simllar tendency to total nitroghen levels. 5. The reducing sugar content was higher in the soysauces with more-wheat and increased rapidly up to the maximum level in two months and then the higher wheat/soybean-ratio was, the slower decrease of the sugar content was observed. 6. The maximum total acidity was observed in the soysauces with 10; 4-6 (soybean/wheat-ratio) and increased similary in all the soysauces throughout the period. 7. According to the sensory evaluation, the short (2-3 months) fermented soysauces showed best taste when soybean/wheat-ratio was 10 : 8 and 10 : 6 if diluted, but in long (4-6 months) fermented soysauces it was 10 : 6 and 10 : 4 if diluted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.104-111
• /
• 2015

This study shows the mechanical properties of alkali-activated slag cement (AASC) synthesized using sulfate with NaOH solution. The used sulfates were calcium sulfate ($CaSO_4$, denoted CS) and sodium sulfate ($Na_2SO_4$, denoted SS). The replacement ratio of sulfates was 2.5, 5.0, 7.5 and 10.0% by weight of slag. NaOH solution of 2M and 4M concentration was used. A sample was activated with sulfate and activated with blended activator (blending NaOH solution with sulfate) respectively. 24 mix ratios were used and the water-binder weight ratio for the test was set 0.5. This research carried out the compressive strength, flexural strength, ultrasonic pulse velocity (UPV), absorption and X-ray diffraction (XRD). In the case of samples with CS, sample with 7.5% CS, sample with 2M NaOH+5.0% CS and sample with 4M NaOH+5.0% CS showed the good performance in the strength development. In the case of samples with SS, sample with 10.0% SS, sample with 2M NaOH+7.5% SS and sample with 4M NaOH+2.5% SS obtained good performance in strength. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of samples indicated that the hydration products formed in samples were ettringite, CSH and silicate phases. In this study, it is indicated that when compared to the use of sulfate only, the use of both sulfate and NaOH solution makes mechanical properties of AASC better.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.49-55
• /
• 2013

Currently, commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desires to evaluate the usefulness of nuclear medicine imaging. The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study, it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using $^{99m}Tc$-pertechnate. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn five times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Depending on the speed of injection, radioisotope was a lot of integrated and emissions up when adjusting the pressure of the pump as 30 stroke, it was the least integrated and emissions up when adjusting as 40 stroke. The integration of the left & right kidney was not reached in the amount of the highest when adjusting as 10 stroke. In the changes according to the amount of the radioactive isotope, 0.6 mCi(22.2 MBq), 0.8 mCi (29.6 MBq)was showed up similar tendency but, in the result of the different injection 0.8 mCi, it was showed up counts close to double of 0.6 mCi. In the result of the differently injection speed of the left & right kidney, as a result of different conditions that injection speed was 20 stroke through left kidney phantom, the injection speed was 30 stroke through right kidney phantom, it was enough difference in the resulting image can be easily distinguished with the naked eye. Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical practice. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.559-568
• /
• 2011

This study aims at listing up those manufacturing activities sensitive to regional characteristics by analyzing locational hierarchy designed on the urban rank-size rule. This locational hierarchy by manufacturing activities is expected to provide a ground for the proper supply of an industrial complex. The analysis of the locational hierarchy by manufacturing activities can work as a method of observing the characteristics of the distribution of location for each economic activity by analyzing the trend in the change of manufacturing location. Consequently, it can be used to determine the appropriate manufacturing activities for the industrial complex of a particular region. Here, the locational hierarchy is analyzed depending on the base of the basic local government such as Gun(district level) and Si(city level), and manufacturing activities are categorized by Korea Standard Industry Code. Those activities demonstrating growth pattern are Manufacture of Electronic Equipment(KSIC 26), Manufacture of Medical Precision Optical Instruments Watch(KSIC 27), Manufacture of Motor Vehicles (KSIC 30, 31), etc. With proper infrastructures, these activities can be located everywhere. Those sectors on the decline pattern in the locational hierarchy can be summarized as Manufacture of Tobacco Products(KSIC 12), Manufacture of wearing apparel Fur Articles(KSIC 14), etc. Those sectors scattered widely in the locational hierarchy are Manufacture of Food Products(KSIC 10), Manufacture of Coke Petroleum Products(KSIC 19), Manufacture of Chemical Products(KSIC 20), Manufacture of Electronic Equipment(KSIC 26). These particular manufacturing activities can be operated in those regions in a sufficient supply of unskilled workers regardless of proper infrastructures. Those activities that have a tendency to reconcentrate on larger cities are Manufacture of Textiles(KSIC 13), Manufacture of Wearing Apparel Clothing Fur Articles(KSIC 14), Manufacture of Other Transport Equiptmen(KSIC 31). In most cases, these sectors tend to favor their existing agglomerated areas and concentrate around large cities. Therefore, it is inefficient to promote these sectors in small or medium-sized cities or underdeveloped regions. The establishment of developmental strategies of an industrial complex can gain greater competitiveness by observing such characteristics of the locational hierarchy.

• Radiation Oncology Journal
• /
• v.16 no.1
• /
• pp.51-61
• /
• 1998

Purpose : Treatment of choice for uterine cervix cancer stage IIB is radiotherapy. We analyzed survivals, Prognostic factors, patterns of failure and complications. Materials and Methods : This is a retrospective analysis of 167 patients with stage IIB carcinoma of uterine cervix treated with curative external pelvic and high dose rate intracavitary radiotherapy at the Department of Therapeutic Radiology, Soonchunhyang University Hospital from August 1985 to August 1994. All the patients followed up from 3 to 141 months(mean 60 months) and age of patients ranged from 31 to 78 years at presentation(mean : 55 years). Results : Overall complete response rate was $84\%$. The response rate for squamous cell carcimoma and adenocarcinoma were $86\%$ and $60\%$, respectively. Overall 5-years survival rate and disease free survival rate was 62 and $59\%$, respectively Mass size and treatment response were significant Prognostic factors for survival Pathologic type and parametrial involvement were marginally significants Prognostic factors. Local failure was 43 cases, distant metastasis was 14 cases and local failure plus distant metastasis was 3 cases, and most of local failures occurred within 24 months, distant metastasis within 12 months after treatment Twenty eight($16.8\%$) patients developed late rectal and urinary complications There were tendency to increasing severity and frequency according to increased fractional dose and total(rectal and bladder) dose. Conclusions : Survival rate was significantly related to tumor size and radiotherapy response. Tumor size should be considered in the clinical s1aging. To increased survival and local control, clinical trials such as decreasing duration of radiotherapy or addition of chemotherapy is needed. To detect early recurrence, regular follow up after RT is important. Because total rectal and bladder dose affected late complications. meticulous vaginal packing is needed to optimize dose of normal tissues and to decrease late complications.

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.271-279
• /
• 2004

Purpose: The object of this study Is to investigate sociodemographic and clinical characteristics, psychology, self-esteem and quality of life in cancer patients on radiation therapy and to provide useful information for therapeutic approach to cancer patients on radiation therapy. Materials and Methods: The subjects were 36 patents who had been treated with radiation therapy and 20 normal people. Sociodemographic information and clinical characteristics of cancer patients on radiation therapy were investigated, and symptom checklist-90-revised, Rosenberg Self-esteem Scale for self esteem, World Health Organization Quality of Life Assessment Instrument for quality of life were administered to subjects. And Spearman's correlation analysis was used among these. Result : The tendency of somatization, depression, anxiety and hostility in cancer group were significantly higher than normal group. Self esteem and quality of life in cancer group were significantly lower than normal group. No significant difference was found in comparison of psychology, self esteem and qualify on life according to sociodemographic variables. Among clinical characteristics, in the presence of metastasis in cancer patients, the scores of anxiety, phobia and paranoid ideation were higher In patients with pain, the score of somatization was higher And in case of weight loss, the score of somatization was higher. The higher score of depression, anxiety and hostility were significantly associated with lower self-esteem. And higher score of somatization, depression, anxiety and hostility were significantly associated with lower quality of life. Conclusion: Understanding and management of psychological symptoms, such as somatization, depression, anxiety, and hostility, and pain control are necessary to improve quality of life in cancer patients on radiation therapy.