• ETRI Journal
• /
• 제37권2호
• /
• pp.406-416
• /
• 2015

Timing plays a key role in expressing the qualitative aspects of a character's motion; that is, conveying emotional state, personality, and character role, all potentially without changing spatial positions. Temporal editing of locomotion style is particularly difficult for a novice animator since observers are not well attuned to the sense of weight and energy displayed through motion timing; and the interface for adjusting timing is far less intuitive to use than that for adjusting pose. In this paper, we propose an editing system that effectively captures the timing variations in an example locomotion set and utilizes them for style transfer from one motion to another via both global and upper-body timing transfers. The global timing transfer focuses on matching the input motion to the body speed of the selected example motion, while the upper-body timing transfer propagates the sense of movement flow - succession - through the torso and arms. Our transfer process is based on key times detected from the example set and transferring the relative changes of angle rotation in the upper body joints from a timing source to an input target motion. We demonstrate that our approach is practical in an interactive application such that a set of short locomotion cycles can be applied to generate a longer sequence with continuously varied timings.

• 전기전자학회논문지
• /
• 제13권4호
• /
• pp.1-7
• /
• 2009

본 논문에서는 고정되지 않은 배경의 동영상에서 객체를 추출하는 방법을 제안한다. 제안하는 알고리즘은 추적에 기반을 둔 기법으로 크게 세 단계의 과정으로 이루어져 있다. 첫 번째 단계는 초기 분할로서, 사용자의 반응을 이용하여 첫 프레임의 분할 결과를 획득하는 과정이다. 초기 분할을 통해 획득된 결과 샘플은 커널 밀도 추정을 이용하여 각 매크로 블록별 컬러 확률 밀도 함수를 생성하는데 사용된다. 두 번째 단계에서는 각 프레임에 대해 이전 프레임의 경계 정보와 움직임 벡터를 이용하여 일치성 띠를 생성하고, 생성된 띠에 대한 시공간 확률을 추정한다. 마지막 단계에서는 각 픽셀별 컬러, 시공간, 스무드항의 합으로 구성된 에너지 함수를 최소화하여 최종 결과를 획득한다. 실험 결과를 통해서 본 논문에서 제안하는 기법이 정확한 분할 결과를 추출하는 지 다양한 테스트 영상을 통해 확인한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.574-575
• /
• 2018

무선 센서 네트워크에서 공간적-시간적 상관관계에 따른 중복 데이터의 발생은 데이터 전송 시에 불필요한 에너지를 소모하여 네트워크 수명을 감소시킨다. 본 논문에서는 먼지 센서를 통한 데이터 수집 실험을 진행하여 공간적-시간적 데이터 중복을 확인하고 이를 해결하기 위해 데이터 전송 허용범위 설정 방법을 제안한다. 제안하는 방법은 클러스터 내의 통합 평균값을 이용하여 데이터 전송 허용범위를 설정한다. 설정된 허용범위는 멤버 노드의 중복 데이터를 감소시키며 클러스터 헤드에서 허용범위 재설정을 통해 수집 데이터의 가변적인 환경에서도 중복 데이터 감소가 가능함을 보인다.

• Smart Structures and Systems
• /
• 제14권1호
• /
• pp.1-16
• /
• 2014

In this work, we address the so-called sensor reachback problem for Wireless Sensor Networks, which consists in collecting the measurements acquired by a large number of sensor nodes into a sink node which has major computational and power capabilities. Focused on applications such as Structural Health Monitoring, we propose a cooperative communication protocol that exploits the spatio-temporal correlations of the sensor measurements in order to save energy when transmitting the information to the sink node in a non-stationary environment. In addition to cooperative communications, the protocol is based on two well-studied adaptive filtering techniques, Least Mean Squares and Recursive Least Squares, which trade off computational complexity and reduction in the number of transmissions to the sink node. Finally, experiments with real acceleration measurements, obtained from the Canton Tower in China, are included to show the effectiveness of the proposed method.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.653-664
• /
• 2013

The design of computer-based instrumentation and control (I&C) systems is determined by the allocation of I&C functions to I&C systems and components. Due to the characteristics of computer-based technology, component failures can negatively affect several I&C functions, so that the reliability proof of the I&C systems requires the accomplishment of I&C system design analyses throughout the I&C life-cycle. On one hand, this paper proposes the restructuring of the sequential IEC 61513 I&C life-cycle according to the V-model, so as to adequately integrate the concept of verification and validation. On the other hand, based on a metamodel for the modeling of I&C systems, this paper introduces a method for the modeling and analysis of the effects with respect to the superposition of failure combinations and event sequences on the I&C system design, i.e. the temporal change of physical structure is analyzed. In the first step, the method is concerned with the modeling of the I&C systems. In the second step, the method considers the analysis of temporal change of physical structure, which integrates the concepts of the diversity and defense-in-depth analysis, fault tree analysis, event tree analysis, and failure mode and effects analysis.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.70-82
• /
• 1993

In this paper, employing the 3-dimensional discrete cosine transform (DCT) for the utilization of the temporal correlation, an adaptive motion sequence coding technique is proposed. The energy distribution in a 3-D DCT block, due to the nonstationary nature of the image data, varies along the veritical, horizontal and temporal directions. Thus, aiming an adaptive system to local variations, adaptive procedures, such as the 3-D classification, the classified linear scanning technique and the VLC table selection scheme, have been implemented in our approach. Also, a hybrid structure which adaptively combines inter-frame coding is presented, and it is found that the adaptive hybrid frame coding technique shows a significant performance gain for a moving sequence which contains a relatively small moving area. Through an intensive computer simulation, it is demonstrated that, the performance of the proposed 3-D transform coding technique shows a close relation with the temporal variation of the sequence to be code. And the proposed technique has the advantages of skipping the computationally complex motion compensation procedure and improving the performance over the 2-D motion compensated transform coding technique for rates in the range of 0.5 ~ 1.0 bpp.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.301-307
• /
• 2022

Energy consumption has grown alongside dramatic population increases. Statistics show that buildings in particular utilize a significant amount of energy, worldwide. Because of this, building energy prediction is crucial to best optimize utilities' energy plans and also create a predictive model for consumers. To improve energy prediction performance, this paper proposes a ResNet-LSTM model that combines residual networks (ResNets) and long short-term memory (LSTM) for energy consumption prediction. ResNets are utilized to extract complex and rich features, while LSTM has the ability to learn temporal correlation; the dense layer is used as a regression to forecast energy consumption. To make our model more robust, we employed Huber loss during the optimization process. Huber loss obtains high efficiency by handling minor errors quadratically. It also takes the absolute error for large errors to increase robustness. This makes our model less sensitive to outlier data. Our proposed system was trained on historical data to forecast energy consumption for different time series. To evaluate our proposed model, we compared our model's performance with several popular machine learning and deep learning methods such as linear regression, neural networks, decision tree, and convolutional neural networks, etc. The results show that our proposed model predicted energy consumption most accurately.

• 신재생에너지
• /
• 제5권4호
• /
• pp.3-8
• /
• 2009

This global case study pursues diversification and intensification for an application system of the national wind atlas which has been developed to support national strategy building and promotion of wind energy dissemination. We chose nine counties' national wind atlas and compared their map area, extraction height, temporal and spatial resolutions, download services, etc. to derive a best practice for the Korea wind atlas application system. Therefore, the web service content is designed to offer high-resolution height information of which covers wind turbine rotor sweeping area and time-series dataset which can be downloaded for further analysis by users. It is anticipated that the system and web service would contribute greatly to wind energy policy making, business and research sectors.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1637-1643
• /
• 2018

To reduce the laser pulse shape distortion accompanying the amplification process and achieve an intended output pulse shape in the Nd:YAG amplifier chain, we propose a frequency-modulated pulse-amplification method. Assuming carrier-frequency-modulated seed pulses, we numerically simulate the pulse amplification in an Nd:YAG amplifier chain where severe distortion occurs. For the calculation, we develop a modified Frantz-Nodvik equation, which enables two inputs with different carrier frequencies. The simulation results indicate that the temporal contrast of the seed pulse needed to obtain a flat output pulse shape is reduced by 16 - 25 dB when frequency modulation is applied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1094-1097
• /
• 2003

In this paper, the cavity-length-dependent spectral and temporal characteristics of a V-groove AlGaAs-GaAs quantum wire (QWR) laser at each subband were investigated. At short cavity lasers less than $300{\mu}m$, a discrete wavelength switching from the n=1 to the n=2 subband occurred due to the increased threshold gain, resulting from the increased cavity loss. Using the characteristic of the wavelength shift from n=1 to the n=2 subband with shortening the cavity length, ultrafast lasing behaviors under gain switching at the n=1 and the n=2 subband transition were demonstrated and compared.