• 대한수의학회지
• /
• 제53권4호
• /
• pp.211-216
• /
• 2013

This study was focusing on evaluating the protection of polyphosphate kinase (ppk) deleted and/or temperature-sensitive (ts) Salmonella Enteritidis (SE) as an attenuated vaccine in chickens. We constructed SEppk, SEts and SEppk::ts mutants and screened those mutants by growth capability in vitro, protection study in mice model and antibody response in chickens. Among the mutants, SEppk::ts-3 was selected because it showed higher growth capability, good protection against highly virulent SE in mice model, and good antibody response in chickens. SEppk::ts-3 also showed good protection against highly virulent SE isolate because it decreased colonization of virulent SE challenge strain in spleen, liver and cecum compared with the non-vaccinated control. The SEppk::ts-3 mutant showed cross-protection against S. Gallinarum (SG) challenge although the its cross-protection rate was a little lower than that of SG9R, a commercial vaccine against SG infection. To use for live attenuated vaccine in chickens, it should further be characterized.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.1-11
• /
• 1998

열 수축 쉬-트용 점착제의 접착성, 내한성 및 유동성을 향상시키기 위해 점착제를 구성하는 각 성분들의 종류 및 함량에 따른 물성을 평가하였다. 본 연구에서는 베이스 폴리머로서 내후성이 우수한 부틸고무를 선정하여 실험을 진행하였다. 점착부여제는 석유계 수지가 로진보다 우수한 접착력을 나타내었으며, 함량이 감소함에 따라 유동성이 저하됨을 알 수 있었다. 폴리부텐은 저 분자량보다 고 분자량의 물성이 우수하였다. 카본블랙의 경우 입자경이 클수록 물성 향상에 유리하였다. 탄산칼슘을 중량제로서 혼입할 경우 카본블랙과 함께 혼합시키는 경우가 바람직하였다.

• 센서학회지
• /
• 제6권1호
• /
• pp.43-48
• /
• 1997

$Ca_{10}(PO_{4})_{6}(OH)_{2}$ 감습소자를 고상반응법을 이용하여 제조하고, 그의 감습특성을 조사하였다. 상대습도가 증가함에 따라 임피던스는 감소하며 $30{\sim}90\;%$의 습도영역에서 임피던스의 변화가 약 $10^{2}\;{\Omega}$ 정도로 우수한 감도를 보임을 알 수 있다. 또한 감습도는 주위 온도변화와 습기에의 장시간 노출에 안정된 특성을 나타내었다. 시편의 열처리에서도 감도의 변화가 없으며, 흡습 및 탈습에 따른 히스테리시스 특성은 거의 나타나지 않았다.

• 한국전기전자재료학회논문지
• /
• 제14권4호
• /
• pp.302-308
• /
• 2001

The polymers with various composition of 4-vinylpyridine (4-VP) with n-butyl acrylate (n-BA) and 2-hydroxypropyl methacrylate (HPMA) were synthesized as a humidity sensitive material and quaternized with 1.5-dibromopentane. Resistance versus relative humidity decreased with increase in the content of n-BA in the copolymer. The introduction of HPMA increased the resistance of the humidity sensor as well as enhanced the adherence to the alumina substrate. In the case of 4-VP/n-BA/HPMA=80/10.10, the hysteresis and temperature coefficient were $\pm$2%RH and -0.42∼0.46%RH/$\^{C}$. The average resistance at 30%RH, 60%RH and 90%RH are 3.1㏁, 155 ㏀ and 7.9 ㏀, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.127-128
• /
• 2005

UV-curable pressure sensitive adhesives were prepared by blending acrylic copolymer, copolymerized with butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) by solution polymerization, triethyl amine (TEA) and trimethylolpropane triacrylate (TMPTA). The PSAs were evaluated by peel strength with varying contents of TMPTA and UV dose, and also glass transition temperature($T_g$) of PSAs were measured. When exposed on UV irradiation, the PSAs showed the decreased peel strength and increased $T_g$. And following UV irradiation, the PSAs did not leave any residue on wafer after peel off PSA.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.1-9
• /
• 2013

The experimental study of the white LED lighting focused on the readability in interior space according to age group is conducted realizing importance of the lighting environment and necessity of lighting study depending on the user situation. The results of study represent that a teenager does not show sensitive reaction to change of the color temperature and illuminance. The people in 20s and 30s prefer neutral white LED lighting and are very sensitive to change of the light environment. The people in 50s and 60s prefer high illumination and cool white LED lighting series. People of all ages highly appraise 6000K of 700 lux and 4000K in the illuminance range of 700 lux to 1000 lux for readability. The white LED lighting of color temperature 4000K is estimated as a suitable environment for readability in a wide range of illumination.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.43-49
• /
• 2010

The piping failure probability of the reactor coolant system in Kori unit 1 was evaluated considering stress corrosion cracking. The P-PIE program (Probabilistic Piping Integrity Evaluation Program) developed in this study was used in the analysis. The effect of some variables such as oxygen concentration during start up and steady state operation, and operating temperature, which are related with stress corrosion cracking, on the piping failure probabilities was investigated. The effects of leak detection capability, the size of big leak, piping loops, and reactor types on the piping failure probability were also investigated. The results show that (1) LOCA (loss of coolant accident) probability of Kori unit 1 is extremely low, (2) leak probability is sensitive to oxygen concentration during steady state operation and operating temperature, while not sensitive to the oxygen concentration during start up, and (3) the piping thickness and operating temperature play important roles in the leak probabilities of the cold leg in 4 reactor types having same inner diameter.

• 한국유체기계학회 논문집
• /
• 제6권1호
• /
• pp.37-43
• /
• 2003

Natural convection of a magnetic fluid is different from that of Newtonian fluids because a magnetic body force exists in an addition to gravity and buoyancy forces. In this paper, the natural convection of a magnetic fluids (W-40) in a rectangular enclosure is investigated by numerical and experimental methods. One side wall is kept at a constant temperature ($25^{\circ}C$), and the opposite side wall is also kept at a constant temperature ($20^{\circ}C$), Under above conditions, the magnitude of the magnetic fields were varied and applied. GSMAC scheme is used for the numerical method, and the thermo-sensitive liquid crystal film (R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental verification. This study has resulted in the following fact that the natural convection of a magnetic fluid is controlled by the direction and intensity of the magnetic fields.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.193-200
• /
• 2010

Through experimental investigations utilizing hypersonic shock tunnel-coaxial thermocouples as well as blow down hypersonic wind tunnel-temperature sensitive paints, the heat flux and the temperature over a protuberance were measured and analyzed. The experimental data were subsequently compared to heat flux data that was obtained by using blow down hypersonic wind tunnel and heat flux gauges. According to the comparison, both sets of data illustrated correlation with one another. The measured heat flux was large when the height of the protuberance was large. Experimental results show that heat flux measurements taken at higher locations were greater than those taken at lower locations. For high protuberances, a severe jump in the heat flux was observed, ranging in values within 0.6-0.7 of the height of the protuberances. However, when the protuberance was sufficiently short, a rise in the heat flux was rarely observed as the protuberance was totally submerged under the separation region.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1071-1075
• /
• 2003

In a closed square cavity filled with a liquid, a cooled the upper horizontal wail and a heated the lower horizontal wall, the flow isn't generated under the ground-based condition when Rayleigh number is lower than 1700. In such case the flow phenomena near an air bubble under a cooled horizontal wall were investigated. The temperature and the flow fields were studied by using the Thermo-sensitive Liquid-Crystal and the image processing. The qualitative analysis for the temperature and the flow fields were carried out by applying the image processing technique to the original data. Injecting bubble at the center point of upper cooled wall, the symmetry shape of two vortexes near an air bubble was observed. The bubble size increased, the size of velocity and the magnitude of velocity increased. In spite of elapsed time, a pair of two vortexes was the unique and steady-state flow in a square cavity and wasn't induce to the other flow in the surround region.