• 한국환경성돌연변이발암원학회지
• /
• 제10권2호
• /
• pp.93-106
• /
• 1990

The Drosophila temperature-sensitive mutant shibire (shi) is paralyzed at restrictive temperature by a reversible block in synaptic transmission. To explore the functional relationship among shi gene products, viability and temperature-sensitive paralytic behavior were quantitaively analyzed for four shi alleles, shi$^{ts1}$, shi$^{ts2}$, shi$^{ts4}$, and shi$^{ST139}$, and their heteroallelic combinations. The hemizygous combination of shi alleles over deficiency was not completely lethal. shi$^{ts2}$ exhibited distinctively higher viability than other alleles. A novel behavior, bang sensitivity, was also found in shi/Df(1). This bang-sensitive paralytic behavior was compared with that of the typical bang-sensitive mutant flies. Heterozygotes, shi/+, are more severe in temperature sensitivity than deficiency hemizygotes, Df(1)/+. Heteroallelic combinations of shi were less sensitive to high temperature than homozygotes. Among all allelic combinations, shi$^{ts2}$/shi$^{ts4}$ showed an unexpected extreme reduction in temperature sensitivity. The results of allelic interactions among 4 shi alleles suggest that the shi mutations examined behave as antimorphic alleles and that the gene product of shi are likely to function in multimeric forms.

• 폴리머
• /
• 제28권1호
• /
• pp.59-66
• /
• 2004

온도에 의존하여 졸-젤 전이를 나타내는 온도민감성 리포솜을 함유하는 폴리 N-이소프로필아크릴아마이드 젤을 제조하였다. 온도민감성 리포솜의 표면은 3$0^{\circ}C$에서 하한임계용액온도를 나타내는 N-이소프로필아크릴아마이드와 옥타데실아크릴레이트의 공중합체를 이용하여 변형시켰다. 표면이 변형된 온도민감성 리포솜을 폴리 N-이소프로필아크릴아마이드 수용액에 혼합하였다. 혼합용액을 하한임계용액온도 이상으로 가열했을 때 물리적으로 가교결합이 이루어진 젤의 형태가 이루어지며, 이때 온도 민감성 리포솜이 함유된 폴리 N-이소프로필아크릴아마이드 젤이 만들어진다. 온도민감성 리포솜으로부터 약물의 방출은 형광강도를 측정하여 결정하였다. 폴리 N-이소프로필아크릴아마이드 젤 내부의 온도민감성 리포솜으로부터 약물의 방출은 온도가 증가할수록 지속적인 방출을 나타내었다.

• Journal of Magnetics
• /
• 제12권4호
• /
• pp.161-164
• /
• 2007

Constant temperature regulation of a hybrid heater which is composed of a temperature sensitive ferrite with low permeability and a Cu tube is investigated for hyperthermia. The temperature sensitive ferrite is inserted into a Cu tube and its length and diameter are 10 mm and 3 mm. Below B=0.05 T, the measured temperature and the calculated one increased with the ratio of $B^{1/2}$ and agreed well with each other. Above B=0.05 T, the measured temperatures maintained constantly almost $50^{\circ}C{\pm}1.5^{\circ}C$ because of the influence of Curie temperature of the temperature sensitive ferrite. This result shows that the hybrid heater is able to regulate the temperature constantly at the rate of $50^{\circ}C{\pm}1.5^{\circ}C$.

• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.153-160
• /
• 2006

A technique for measuring surface temperature field in micro scale is newly proposed, which uses temperature-sensitive fluorescent (TSF) dye coated on the surface and is easily implemented with a fluorescence microscope and a CCD camera. The TSF dye is chosen among mixtures of various chemical compositions including rhodamine B as the fluorescent dye to be most sensitive to temperature change. In order to examine the effectiveness of this temperature measurement technique, numerical analysis and experiment on transient conduction heat transfer for two different substrate materials, i. e., silicon and glass, are performed. In the experiment, to accurately measure the temperature with high resolution temperature calibration curves were obtained with very fine spatial units. The experimental results agree qualitatively well with the numerical data in the silicon and glass substrate cases so that the present temperature measurement method proves to be quite reliable. In addition, it is noteworthy that the glass substrate is more appropriate to be used as thermally-insulating locally-heating heater in micro thermal devices. This fact is identified in the temperature measuring experiment on the locally-heating heaters made on the wafer of silicon and glass substrates. Accordingly, this technique is capable of accurate and non-intrusive high-resolution measurement of temperature field in microscale.

• Mycobiology
• /
• 제38권1호
• /
• pp.70-73
• /
• 2010

Temperature-sensitive yeast mutants were used to screen for cell cycle-related genes from Pleurotus eryngii genomic DNA. A mushroom genomic DNA library was established and each gene was screened for the ability to rescue seven Saccharomyces cerevisiae temperature-sensitive strains. Hundreds of yeast transformants were selected at restrictive temperatures over $30^{\circ}C$. Plasmids from the transformants that survived were isolated and transformed back into their host strains. The temperature sensitivity of the resulting transformants was tested from $30^{\circ}C$ to $37^{\circ}C$. Ten DNA fragments from P. eryngii were able to rescue yeast temperature-sensitive strains, and their DNA sequences were determined.

• 대한화학회지
• /
• 제47권3호
• /
• pp.257-264
• /
• 2003

본 연구에서는 외부온열 온도$(~40^{\circ}C)$에서 항암약물(doxorubicin)이 방출되는 온도민감성 리포좀에 대하여 연구하였다. 온도민감성 리포좀은 외부온열온도에서 하한임계용액온도의 성질을 나타내는 N-isopropylacrylamide (NIP-AAm)와 Acrylamide(AAm)의 합성고분자에 의하여 변형되었다. 변형된 리포좀으로부터 약물(doxorubicin)의 방출은 온도와 시간의 변화에 따라서 형광강도를 측정하여 결정하였다. Poly(NIPAAm-co-AAm) copolymer에 의하여 변형된 리포좀으로부터 약물(doxorubicin)의 방출은 Poly(NIPAAm-co-AAm) copolymer가 온열온도 범위$(~40{\pm}2^{\circ}C)$에서 적절한 전이를 나타내기 때문에 증가하였다. 또한, 리포좀으로부터 약물의 방출은 5분 이내에 완료되었고, 변형된 리포좀의 크기는 120~170 nm 이었다. 본 연구에서는 온도에 의하여 제어 할 수 있는 온도민감성 리포좀을 제조하였다. 이것은 온도 제어에 따른 종양 표적화에 대한 약물전달시스템에서 활용 될 수 있을 것이다.

• 한국식품영양학회지
• /
• 제1권1호
• /
• pp.25-32
• /
• 1988

Properties of purified isocitrate lyase from Saccharomycopsis lipolytica ATCC 44601 and MX9-11RX8 temperature-sensitive mutant were investigated. Purified isocitrate lyase from temperature-sensitive mutant was indistinguishable from the wild type enzyme with respect to the isoelectric pH(5.3), the thermostability and Km value for threo-Ds-Isocitrate(about 0.2 mM). When isocitrate lyase induced by acetate minimal medium at 33$^{\circ}C$, MX9-11RX8 mutant did not express enzyme activity but did synthesize polypeptide chain whose electrophoretic mobilities were equal to those of the purified enzymes.

• 한국의류학회지
• /
• 제24권2호
• /
• pp.199-204
• /
• 2000

This study was conducted to investigate the thermoregulatory responses and wearing behavior of the cold-sensitive men when exposed to the mild cold of 14$^{\circ}C$. Two sessions of experiment were carried out and five healthy young men for the cold-sensitive group(CSG) and four healthy young for the cold-insensitive group(CIG) participated in the study as subjects CSG maintained rectal temperature lower than CIG due to their thicker clothing resulted in larger decrease of rectal temperature. CSG maintained skin temperatures higher than CIG. CSG felt cooler than CIG but wore thicker clothing for thermal comfort and this made keep their sensation warmer. These results were discussed in terms of autonomic and behavioral temperature regulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1225-1230
• /
• 2004

The effects of substrate material on the local heating performance of microheaters are studied by both numerical analysis and experiment. Transient conduction analysis shows that the substrate material with low thermal conductivity is critical to the local heating and fast response. A measurement technique for surface temperature field in microscale is newly proposed, which uses temperature sensitive fluorescent dye coated on the surface. The measured surface temperature fields on microheater arrays fabricated on different substrates are presented.

• Macromolecular Research
• /
• 제8권2호
• /
• pp.89-94
• /
• 2000

A semi-interpenetrating network (IPN) was prepared for a temperature-sensitive polymer system composed of sodium alginate and poly (N, N-dimethylaminoethyl methacrylate (DMAEMA)-co-ethyl acrylamide (EAAm)). The role of sodium alginate is to provide crosslinked network and that of poly(DMAEMA-co-EAAm) is to provide temperature responsiveness to the polymer system. Semi-IPN gel shows temperature-induced swelling transition at the same temperature of the lower critical solution temperature of poly(DMAEMA-co-EAAm) and its swelling kinetics is manipulated by the control of crosslinking densitv.