• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1857-1863
• /
• 2010

We present the fabrication and characterization of transparent carbon nanotube film (CNF) piezoresistors. CNFs were fabricated by vacuum filtration methods with 65?92% transmittance and patterned on Au-deposited silicon wafer by photolithography and dry etching. The patterned CNFs were transferred onto poly-dimethysiloxane (PDMS) using the weak adhesion property between the silicon wafer and the Au layer. The transferred CNFs were confirmed to be piezoresistors using the equation of concentrated-force-derived resistance change. The gauge factor of the CNFs was measured to range from 10 to 20 as the resistance of the CNFs increased with applied pressure. In polymer microelectromechanical systems, CNF piezoresistors are the promising materials because of their high sensitivity and low-temperature process.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.6-10
• /
• 2005

We have studied feasibility of single-layer second-order $high-T_c$ SQUID gradiometers in magnetocardiography. We have measured human cardiomagnetic signals using a short-baseline (5.8 mm) single-layer second-order YBCO gradiometer in partially shielded environments. The gradiometer has an overall size of $17.6\;mm{\times}6\;mm$ and contains three parallel-connected pickup coils which are directly coupled to a step-edge junction SQUID. The gradiometer showed an unshielded gradient noise of $0.84\;pT/cm^2/Hz^{1/2}$ at 1 Hz, which corresponds to an equivalent field noise of $280\;fT/Hz^{1/2}$. The balancing factor was $10^3$. Based on the same design rules as the short-baseline devices, we have studied fabrication of 30 mm-long baseline gradiometers. The devices had an overall size of $70.2\;mm{\times}10.6\;mm$ with each pickup coil of $10\;mm{\times}10\;mm$ in outer size. As Josephson elements we made two types of submicron bridges, which are variable thickness bridge (VTB) and constant thickness bridge (CTB), from $3\;{\mu}m-wide$ and 300 nm-thick YBCO lines with a thin layer of Au on top by using a focused ion beam (FIB) patterning method. VTB was 300 nm wide, 200 nm thick, 30 nm long with Au removed and CTB 100 nm wide and 30 nm long. In temperature-dependent critical currents, $I_c(T)$, VTB showed an nonmetallic barrier-type behavior and CTB an SNS behavior. We believe that those characteristics are ascribed to naturally formed grain boundaries crossing the bridges.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2008

The main entrance is even disappeared nowadays when the component type is changed, because it loses the actual function. On the other hand, the type of main entrance is changed variously depended on the materials for house and method of construction. Eleven points in the Chungyang-Gun where the environment of rural villages is well maintained was choosed researched to make data. These data of visual component elements were analysed by using the SPSS 12.0 Windows. Cluster Analysis and Factor Analysis was performed to analyze the different types of main entrance in the rural villages. From the above research, we could conclude below results. Research result, The whole quality of the farming village gate with fine feeling and constant temperature characteristic order appeared with the fact that preference quality is highest, in afterwords was analyzed. Also the research which sees led and the result which appears from the landscape quality analysis which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the abstractive landscape image has. Like this research result judges currently the research which is meaning which provides a planning standards and the guideline which the governmental department and the rural village improvement enterprising public opinion rural village residential enterprise which is propelling from oneself are detailed. Specially about landscape quality of the residential gate that presents a type classification and preference quality from the actual condition where the research is insufficient the hereafter rural village improvement enterprise specially, sees with the fact that will be the possibility of affecting is meaning to residential section the succeeding researches actively, there being could be advanced, wishes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.59-66
• /
• 2014

Insulation of rooftop is one of the major performance to energy-saving construction. Further, waterproofing performance is also important. For such a reason, it is need to develop waterproofing method containing thermal insulation property. This study was wanted to evaluate thermal insulation performance about the composite waterproofing method of thermal supplement type that is developed recently. As a result of waterproofing performance test, every test item was showed over the performance standards of KS (Korean (Industrial) Standards). And the result of thermal insulation performance test, the highest temperature in the styrofoam box was $25.91^{\circ}C$, the bubble sheet box was $17.28^{\circ}C$, the insulation sheet box was $15.47^{\circ}C$ and the waterproofing sheet box of thermal supplement type was $24.11^{\circ}C$. In observations of thermal bridges of sheet's joint, thermal bridges was not identified at the sheet's joint. As a result, composite waterproofing method of thermal supplement type is interpreted to have thermal insulation performance.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.263-272
• /
• 1997

A Radiation Alarm Monitor has been developed and manufactured in order to protect radiation workers from over-exposure. A visual and audible alarm system has been attached to initiate evacuation when accident occurs such as an unexpected change of radiation level or an over-exposure. The Radiation Alarm Monitor installed with microprocessor can record the information of radiation field change between 90 min. before the alarm and 30 min. after the alarm and also provide the data to an IBM compatible computer to analyze the accidents and to set a counterplan. It features a wide detection range of radiation field(10 mR/h-100 R/h), radiation field data storage, portability, high precision (${\pm}5%$) due to self-calibration function, and adaption of a powerful alarm system. According to ANSI N42.17A, the most stringent test standards, performance tests were carried out under various conditions of temperature, humidity, vibration, and electromagnetic wave hindrance at Korea Research Institute of Standards & Science (KRISS). As a result, the Radiation Alarm Monitor passed all tests.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.90-100
• /
• 2015

Green technologies such as renewable energy resources, Electric Vehicles and Plug-in Hybrid Electric Vehicles (EVs/PHEVs), electric locomotives, etc. are continually increasing at the existing power network especially distribution levels, which are Medium Voltage (MV) and Low Voltage (LV). It can be noted that the increasing level of green technologies is driven by the reduction emission policies of carbon dioxide ($CO_2$). The green technologies can affect the quality of power, and hence its impacts of are analysed. In practical, the environment such as wind, solar irradiation, temperature etc. are uncontrollable, and therefore the output power of renewable energy in that area can be varied. Moreover, the technology of the EVs/PHEVs is still developed in order to improve the performance of supply and driving systems. This means that these developed can cause harmonic distortion as the control system is mostly used power electronics. Therefore, this paper aims to analyse the voltage variation and harmonic distortion in distribution power network in urban area in Europe due to the combination between wind turbine, hydro turbine, photovoltaic (PV) system and EVs/PHEVs. More realistic penetration levels of SSDGs and EVs/PHEVs as forecasted for 2020 is used to analyse. The dynamic load demands are also taken into account. In order to ensure the accurate of simulation results, the practical parameters of distribution system are used and the international standards such as Institute of Electrical and Electronics Engineers (IEEE) standards are also complied. The suggestion solutions are also presented. The MATLAB/Simulink software is chosen as it can support complicate modelling and analysis.

• Korean Journal of Veterinary Service
• /
• v.37 no.2
• /
• pp.123-129
• /
• 2014

This research was performed in order to investigate the origin, standard compound, and structural and physical properties of honeybee venom which used as natural antibiotic ingredients to animal. We compared the nucleotide sequence of mitochondrial cytochrome c oxidase subunit 1 gene (COI) of honeybees were collected from Gangwon, Gyeonggi, Chungnam, Gyeongbuk, Gyeongnam province and Suwon. As major constituent of honeybee venom, melittin was assayed by liquid chromatography. X-ray, differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FT-IR) were utilized to examine the structural and physical properties of honeybee venom. Based on the 627bp sequence of COI, Apis mellifera ligustica was determinated honeybees collected from all six regions. Melittin content varied from 50.7 to 68.6 and averaged 59.8%. According to XRD analysis, honeybee venom showed regular crystal structure peaks at $2{\Theta}=8.5^{\circ}$ and $21.5^{\circ}$. DSC showed that the maximum degration temperature of powder was around $230^{\circ}C$. Through FT-IR analysis, we could identify cross-linking by the presence of peptide peak at 1,500~1,600 $cm^{-1}$. In conclusion, the origin of honeybee venom was Apis mellifera ligustica and effective ingredient standards was melittin content varied from 50.7 to 68.6 as natural antibiotic ingredients.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.737-744
• /
• 2007

An isotope dilution-liquid chromatography/tandem mass spectrometric method was developed as a candidate reference method for the accurate determination of acrylamide in potato chips, starch-rich foodstuff cooked at high temperature. Sample was spiked with 13C3-acrylamide and then extracted with water. The extract was further cleaned up with an Oasis HLB solid-phase extraction (SPE) cartridge and an Oasis mixed-phase cation exchange (MCX) SPE cartridge. The extract was analyzed by using LC/ESI/Tandem MS in positive ion mode. LC with a medium reversed-phase (C4) column was optimized to obtain adequate chromatographic retention and separation of acrylamide. MS was operated to selectively monitor [M+H]+ ions of the analyte and its isotope analogue at m/z 72 and m/z 75, respectively. Sample was also analyzed by the LC/MS with selectively monitoring the collisionally induced dissociation channels of m/z 72 → m/z 55 and m/z 75 → 58. Compared to the LC/MS chromatograms, the LC/MS/MS chromatograms showed substantially reduced background chemical noises coming from solvent clusters formed during ESI spray processes and interferences from sample matrix. Repeatability and reproducibility studies showed that the LC/MS/MS method is a reliable and reproducible method which can provide a typical method precision of 1.0% while the LC/MS results are influenced by chemical interferences.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.273-283
• /
• 2009

Recent research issues on the scratch behaviors of polymeric materials has been investigated. In this study, the scratch characterization of polymeric materials with respect of experimental parameters, such as nature of the material, temperature, applied load, test speed, surface treatment, scratch number of times, polymer structure/functional groups, degree of cross-linking, and crystallinity, are reviewed. In addition, the testing standards and methodologies which could quantify the scratch behaviors are introduced and the current international standards are compared and summarized. The latest technical approaches for evaluating the scratch behaviors and improving the scratch resistance of polymers are also discussed.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2012

Generally, cosmetic creams have been used to moisturize and smooth human skin. Recently, people concerns about the creams released with natural flavors and its functionality. This study focused to assess the psychophysiological effects of creams with 5 natural flavors such as patchouli oil, frankincense, sandalwood oil, none and newly developed S6. Initially, we have performed subjective evaluation for 100 female subjects aged 20 to 30 from Daejeon, South Korea. The results showed the most preferred flavor was S6 condition. Second, physiological evaluations for 20 female subjects were measured with EEG, ECG and GSR. In EEG analysis, the alpha ratio was confirmed to appear higher in each condition. The statistical analysis shows that significantly largest effect at S6 condition($p$ <0.05). The result from ECG and GSR measurements also shows the same trend. Third, skin conditions were measured when using S6. As a result, the skin temperature, humidity and skin movement speed were increased with S6 condition. The moisturizing and elasticity effects were confirmed.