• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.30-45
• /
• 2014

Recently, multimedia application users who demand for ubiquitous computing environment are rapidly increasing, and wireless mesh network is receiving attention as a cost-effective key technology for next generation wireless networking. When multiple flows are transmitting data at the same time in the network, routing for path selection of each flow and link resource allocation for data transmission of each flow are one of the key factors that influence to the effectiveness of the network directly. In this paper, we consider problems for path discovery and resource allocation of links at the same time and we propose an algorithm based on mathematical modeling using a technique for cross-layer optimization design in STDMA-based wireless mesh networks that can enhance transfer performance for each flow. We show by performance analysis that the proposed algorithm can enhance the throughput performance by maximally utilizing given bandwidth resources when the number of flows increase in multi-hop wireless mesh networks.

• Journal of Agricultural Extension & Community Development
• /
• v.10 no.2
• /
• pp.267-283
• /
• 2003

The purposes of the study were to; 1) examine the diffusion and adoption of new agricultural technology in rice farming, 2) survey the status of agricultural education institutions on technology transfer, and 3) explore the linkages between agricultural education and extension for more effective reinforcement strategies to further the diffusion and adoption of new agricultural technology in Korea. Literature review, field survey and panel discussions were employed to strengthen the linkages among agricultural education, research and extension in Korea. As the results of analysis of the diffusion and adoption of new agricultural technology in rice farming following recommendations were offered; 1. Extension services have helped Korean farmers in achieving self-sufficiency in rice and year-round supply of green vegetables as well as upbringing rural youth, however, government changed the status of extension educators from central government staff to county/city government staff since 1997. This brought about various problems such as: decreased morale and number of extension educators, thus weakening the extension education function, weakened linkages between national and local extension offices, less opportunity for in-service education of extension educators, and weakened linkages between agricultural research and extension, etc. 2. In order to insure that extension educators are high caliber professional individuals, it is crucial to establish a system that nationally recognizes these individuals as such, and that provides a professional development path. It is important to restore the morale of extension educators to continually achieve the national goals of food production, balanced national development and preservation of environment, at the same time to meet increasing needs of farmers. 3. Because of the critical importance of diffusing innovations to agricultural producers in order to ensure quality and steady food supply, it is crucial that these issues be addressed before the extension service further deteriorates. Further research activities on agricultural extension should be conducted for more effective agricultural extension system in Korea to achieve a greater rural, national and regional development. 4. Research and implementation activities should be emphasized and encouraged to improve the cooperation and collaboration among agricultural education research and extension to better serve farmers' educational and information needs. National level research activities should be encouraged to improve the effectiveness of agricultural technology transfer including internet education programs for farmers in Korea.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2881-2894
• /
• 2018

Cyber attacks are increasing continuously. On average about one million malicious codes appear every day, and attacks are expanding gradually to IT convergence services (e.g. vehicles and television) and social infrastructure (nuclear energy, power, water, etc.), as well as cyberspace. Analysis of large-scale cyber incidents has revealed that most attacks are started by PCs infected with malicious code. This paper proposes a method of detecting an attack IP automatically by analyzing the characteristics of the e-mail transfer path, which cannot be manipulated by the attacker. In particular, we developed a system based on the proposed model, and operated it for more than four months, and then detected 1,750,000 attack IPs by analyzing 22,570,000 spam e-mails in a commercial environment. A detected attack IP can be used to remove spam e-mails by linking it with the cyber removal system, or to block spam e-mails by linking it with the RBL(Real-time Blocking List) system. In addition, the developed system is expected to play a positive role in preventing cyber attacks, as it can detect a large number of attack IPs when linked with the portal site.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.251-257
• /
• 1998

Active mufflers have been mainly applied in the large industrial engine due to considerable expense for implementation, but a necessity of development has been increased by the tightened regulation of exhaust noise and the request of high power. In this study, the active muffler prototype for installing in an automobile is designed and constructed. The active muffler is designed so that the primary noise and the control sound are propagated as a plane wave in the outlet. Therefore, the error microphone could be placed outside the high temperature centers of the tail pipe, and the noise radiating to the outside could be reduced in the whole areas around the outlet. For evaluating the control performance of the prototype, the control experiments of band-pass filtered random signal and the modulation of sinusoidal signal which are generated from the primary noise speaker as practical exhaust sound level are implemented. And to investigate the radiation pattern from the outlet of tail pipe and the noise reduction level of points placed adjacent to the outlet, the sound level of adjacent points of thirty is measured.

• Earthquakes and Structures
• /
• v.12 no.6
• /
• pp.699-712
• /
• 2017

This study evaluates the effectiveness of a newly developed retrofitting scheme for masonry-infilled non-ductile RC frames experimentally and by numerical simulation. The technique focuses on modifying the load path and yield mechanism of the infilled frame to enhance the ductility. A vertical gap between the column and the infill panel was strategically introduced so that no shear force is directly transferred to the column. Steel brackets and small vertical steel members were then provided to transfer the interactive forces between the RC frame and the masonry panel. Wire meshes and high-strength mortar were provided in areas with high stress concentration and in the panel to further reduce damage. Cyclic load tests on a large-scale specimen of a single-bay, single-story, masonry-infilled RC frame were carried out. Based on those tests, the retrofitting scheme provided significant improvement, especially in terms of ductility enhancement. All retrofitted specimens clearly exhibited much better performances than those stipulated in building standards for masonry-infilled structures. A macro-scale computer model based on a diagonal-strut concept was also developed for predicting the global behavior of the retrofitted masonry-infilled frames. This proposed model was effectively used to evaluate the global responses of the test specimens with acceptable accuracy, especially in terms of strength, stiffness and damage condition.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.518-525
• /
• 2012

The modulation transfer function is generally used as a method to estimate the characteristics of this kind of optical system because it cannot reappear or implement image of the object perfect. By the way, it is difficult to assess the optical system with existing MTF method since the reaction between diffraction and aberration of aperture is very complicate if the aberration is very small. The MTF has to be calculated considering the numerical aperture, defocusing, OPD and phase difference. We validate its feasibility using bessel function as an estimating method, and then realize it through illustration in this paper.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.5-9
• /
• 2015

Thermal management becomes serious in 3D stacked IC because of higher heat flux, increased power generation, extreme hot spot, etc. In this paper, we reviewed the recent developments of thermal management for 3D stacked IC which is a promising candidate to keep Moore's law continue. According to experimental and numerical simulation results, Cu TSV affected heat dissipation in a thin chip due to its high thermal conductivity and could be used as an efficient heat dissipation path. Other parameters like bumps, gap filling material also had effects on heat transfer between stacked ICs. Thermal aware circuit design was briefly discussed as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.93-100
• /
• 1993

With increasing technology, requirement to car noise and related dynamics are getting competitive keypoint. Unfortunately, vibro - acoustic behavior of a car is nowadays only possible after development of prototypes. But, obviously, in the Area of Research, many of Industrials, Universities and research centers try to codevelop the design tools to predict the vibro-acoustic behaviors. At this stage, it is more realistic to represent the existing technologies in order for the engineer to get their own know-how to design and to Integrate existing techniques, to setup their test facility, and to develope some tools with which they can successfully predict noise levels of car in the design phase. Moreover, most of the theories which will be represented in this paper can be used in the design phase. At any way, finding the cause of trouble shooting is more urgent than the design of a car to the test engineer. In this paper, transfer path analysis, noise source identification, and the key test method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of finding characteristics of joint and welding part will be introduced. Most parts of this paper was quoted from the papers of LMS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.103.1-103.1
• /
• 2014

Due to their excellent optical and electrochemical properties, conjugated polymers have attracted much attention over the last two decades and employed to opto-electrical devices. In particular, conjugated polymers possess many attractive features that make them suitable for a variety of sensing task. For example, their delocalized electronic structures can be strongly modified by varying the surrounding environment, which significantly affected molecular energy level. In other word, conjugated polymers can detect and transduce the environmental information into a fluorescence signal. Conjugated polymers also display amplified quenching compared to small molecule counterparts. This amplified fluorescence quenching is attributed to the delocalization and migration of the excitons along the conjugated polymer backbones. Long backbones of conjugated polymer provide the transporting path for electron as a conduit, allowing that excitons migrate rapidly into quencher site along the backbone. This is often referred to as the molecular wire effect or antenna effect. Moreover, structures of conjugated polymers can be easily tailored to adjust solubility, absorption/emission properties, and regulation of electron/energy transfer. Based on this versatility, conjugated polymers have been utilized to many novel sensory platforms as a promising material. In this tutorial, I will highlight a variety of fluorescence sensors base on conjugated polymer and explain their sensory mechanism together with selected examples from reference literatures.