• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1998년도 21세기 한반도 농업전망과 대책(한국작물학회.한국육종학회 공동주관 심포지움 회보)
• /
• pp.266-287
• /
• 1998

Environmental conditions and expected profit are the major criteria to select crops to be cultivated in any region. Traditionally, miscellaneous crops have been cultivated as alternative crop in case of unfavorable climate or supplementary crop in marginal lands. Since the successful breeding of high yielding varieties of staple crops and development of cultural techniques in 1970s in Korea, production of miscellaneous crops decreased markedly due to the rapid commercialization of agriculture and increased productions of horticultural crops, although yields have been doubled during the last $2\~3$ decades. On the other hand, animal husbandry has been developing remarkably parallel with national economic development and the increased consumption of animal products. As a result, imports of feed grains such as corn have increased rapidly, while roughage production became lower than demand. Among miscellaneous crops, corn production increased markedly through the development of hybrids and due to its importance as silage crops. Acreage of corn production including grains, fresh corns and feeding is about 120,000 ha, while acreage of buckwheat is about 5,000 ha and those of other miscellaneous crops decreased to a level of about 1,000 ha. Although miscellaneous crops have low yield potential and are unprofitable due to low price and imports of cheap foreign products, they should be kept to cultivate. Miscellaneous crops are important components that maintain diversity among upland crops as well as alternative crops in case of unfavorable climate. The low yield potential of miscellaneous crops might be due to lack of efforts to breed high yielding varieties and to develope cultural techniques. Continuous investment in research, exploitation of new utilization for miscellaneous crops as sustainable crop, honey crop and sightseeing crop, and development of healthy and special foods will promote their cultivation. Animal feeding in Korea depends mainly on formula feeds. As the number of animals increases to meet demand of animal products, there is no alternative way but to import grains to feed them. But roughage production, which is necessary for normal growth of ruminant animals, should be increased. However, lack of arable land and pasture land limits the production of good roughages. It is estimated that number of course for meat and milk production will be $2.5{\~}2.6$ million and total of $6.2{\~}7.5$ million tons of roughages should be produced. This implies that more than 1 million tons of roughage are needed, although pasture land, upland for forage crops, forage crops after rice cultivation and rice straw are utilized. Therefore, new reclamation of pasture land, increased roughage production in cultivating land, increased cultivation of forage crops after rice, more utilization of rice straw and active exploration of indigenous plant species as roughage resources should be promoted

• 천문학논총
• /
• 제30권1호
• /
• pp.31-38
• /
• 2015

We develop a real-time data transfer system for the Korea Microlensing Telescope Network (KMTNet) photometry data and test whether it is suitable for Korea Astronomy and Space Science Institute (KASI) and three different observatories, which are Cerro Tololo Inter-Ameriacan Observatory (CTIO) in Chile, Siding Springs Observatory (SSO) in Australia, and South African Astronomical Observatory (SAAO) in South Africa. For this test, we use a high speed global network being dedicated for researches. From the test, we obtain that the elapsed times between KASI and each three observatories, CTIO, SSO, and SAAO to transfer 650 MB of data are 99.0, 9.2, 119.0 seconds, respectively. This means that the system can be used for the real-time data processing of KMTNet.

• 천문학회지
• /
• 제43권5호
• /
• pp.169-181
• /
• 2010

We develop a proto-model of an off-axis reflective telescope for infrared wide-field observations based on the design of Schwarzschild-Chang type telescope. With only two mirrors, this design achieves an entrance pupil diameter of 50 mm and an effective focal length of 100 mm. We can apply this design to a mid-infrared telescope with a field of view of $8^{\circ}{\times}8^{\circ}$. In spite of the substantial advantages of off-axis telescopes in the infrared compared to refractive or on-axis reflective telescopes, it is known to be difficult to align the mirrors in off-axis systems because of their asymmetric structures. Off-axis mirrors of our telescope are manufactured at the Korea Basic Science Institute (KBSI). We analyze the fabricated mirror surfaces by fitting polynomial functions to the measured data. We accomplish alignment of this two-mirror off-axis system using a ray tracing method. A simple imaging test is performed to compare a pinhole image with a simulated prediction.

• 복식
• /
• 제64권7호
• /
• pp.45-56
• /
• 2014

Embroidery is called 'Ja-Su' in Korea. The purpose of this study is to present a method that utilizes the technology of traditional Korean embroidery to get a genuine feeling of tradition. This study was conducted in the following manner: first, Previous researches and references were used survey traditional embroidery techniques. Second, by using traditional embroidery techniques, the study attempted to develop a design of embroidery household Items with modern sense and practicality. The results of this study are as follows: This study has developed and produced embroidery household items that can be used in modern life by using traditional embroidery techniques. A total of 10 kinds of miscellaneous everyday life utensils and interior pieces were produced. Materials used in the embroidery production were made out of natural fabrics, such as cotton (Kwang-Mok, Mu-Myung), linen, cotton thread were used for a practical reason for practical reasons (i.e. being easily washable). Embroidery techniques used in this study were straight stitch, outline stitch, satin stitch, separate stitch, french knot stitch, long&short stitch, brick stitch, chain stitch, couching stitch, Pad stitch, and pine-leaf stitch. In order to further develop traditional embroidery, a technique passed down from the ancestors, it needs to change to become more suitable for modern life while maintaining the tradition.

• 한국의류학회지
• /
• 제31권8호
• /
• pp.1252-1261
• /
• 2007

The purpose of this study was to grasp the utilization of traditional Korean Patterns used for fashion cultural products. To achieve this purpose, this study examined the range of fashion cultural products through literature review, previous researches, and market surveys and analyzed the situation of fashion cultural products and the kinds, expression methods, expression techniques, and repeat styles of utilized patterns. The analysis results are as follows. First, in the use of traditional pattern, the most frequently-used fashion cultural products were small and inexpensive accessories, followed by fashion apparel, miscellaneous goods, and living cultural goods. Second, the most frequently-used traditional patterns were plant patterns, especially flower patterns. The next frequently-used ones were mixed patterns, especially in the mixture of flower and letter patterns, and $cloisonn\'{e}$ and flower patterns. The next frequently-used traditional patterns were animal patterns(especially butterfly patterns), followed by geometric patterns, lucky omen patterns, and letter patterns. In the expression methods of used patterns, most products except handicrafts preferred simplified patterns to real patterns. Finally, in the expression techniques of traditional patterns, the most frequently used technique was traditional embroidery, followed by the use of weaving fabrics such as fine gauze and brocade which are used for Hanbok. Also, transfer dyeing which is one of printing techniques, DTP(digital textiles printing), a mixed technique which adds embroidery to weaving fabrics, hand-painting, and a gilt technique were used. The results of this study suggest that most fashion cultural products except few designers' works attached weight to some specified patterns and expression techniques regardless of the characteristics of products since there is little understanding of a variety of patterns and are few researches and development on expression techniques.

• 천문학논총
• /
• 제27권3호
• /
• pp.95-103
• /
• 2012

We analyzed the current status of the telescope control system (TCS2) of the 1.8 m telescope in Bohyunsan Optical Astronomy Observatory (BOAO), and suggest a new TCS (TCS3) for the long term development of BOAO. The TCS2 was constructed in 1998 to replace the TCS1 which was installed with the telescope itself at the commencement of BOAO. One of the important parts of TCS is PMAC (Programmable Multi-Axis Controller), which is a general-purpose multi-axis motion controller. PMAC provides the direct interactive communication environment permitting users to command the controller directly with simple operations. This makes the setup, debugging, and diagnostics very easy. The TCS2 was operated stable for a long time, but the hardware and TCS computers have been deteriorated and are out of date now. The new TCS3 needs to be constructed based on a modern computer system. And functions such as pre-calculations of telescope limiting position, interworking with virtual observatory tools, and using GUI, etc should be added. Construction of the TCS3 will be a step creating a better observation environment for the Korean astronomical society.

• 천문학논총
• /
• 제16권1호
• /
• pp.43-47
• /
• 2001

We developed a CCD camera that can observe wide fields on the sky. We tested the field of views using various lenses. For cooling the CCD chip, we used a thermoelectric cooling device and tested the cooling efficiency. This camera will continuously observe a part of the sky. The data from the camera will be used to decide the current weather condition by the real-time star counting program (SCount) which will be developed later.

• 대한가정학회지
• /
• 제27권4호
• /
• pp.41-50
• /
• 1989

Cobaltous Chloride method has been known as a sufficiently good test methodolgy for the dynamic moisture transfer through textile fabrics. In the current study, Cobaltous Chloride method was adopted and modified to test dynamic moisture transfer in clothing under actual wearing conditions. It was possible to test the significant difference between fabric types by controlling the position of CoCl2 impregnated swatch (LD type), time scale of the moisture transfer (within 10 mins), experimental design (split plot desing) and other miscellaneous experimental techniques. As results, it was concluded that Cobaltous Chloried method is a satisfactory screening test to predict moisture related comfort properties of clothing as won.

• 천문학논총
• /
• 제37권1호
• /
• pp.1-11
• /
• 2022

During the course of analysing both single-dish and very long baseline interferometry (VLBI) data obtained from the Korean VLBI Network (KVN), we found a systematic offset between flux density measurements from different antennas. We were able to attribute a majority of the systematic offsets to changes in the "a priori" antenna gains, which were found to have varied up to 10 percent at 22 GHz and up to 30 percent at 43 GHz. Using historical calibrator observations, we present a revised set of gains that may be applied to KVN data taken from 2015 August to 2019 January. Application of the revised gains to the KVN results in a consistency of correlated flux density measurements between the three baselines of approximately five percent. We found that images from the recalibrated data typically have a 50 percent higher dynamic range, with some cases showing an increase of dynamic range of up to a factor of three.

• 건축역사연구
• /
• 제28권4호
• /
• pp.27-36
• /
• 2019

The traditional earth wall structure consists of a Joongkit(a small reinforcing post inside a wall) and a Oe(a miscellaneous tree, rendered laths) based on the space between the columns and applying the soil. The members who act as the base layer before applying soil used joongkit, sakmok, and oemok, which are known to correspond to the current joongkit, gasisae, and lath strips. This study was designed to understand the following through an analysis of the ancient texts, such as uigwe. Through a study on the usage and specifications of joongkit recorded on the uigwe, I wanted to reveal that joongkit is a material that has different specifications, functions, and installation techniques from current joongkit. The purpose of this study was to present the differences and technical features of the components of use for two types of oeyeokki technique of traditional wall. In addition, the items to be considered at the actual cultural heritage repair site were reviewed in the restoration of the earth wall weaving technique.