• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.63-69
• /
• 1998

The slope revegetation methods in Korea are generally the hydroseeding mixed with perennial herbs, soil, fibers, and fertilizer in consideration of scenic landscape rather than ecological and engineering effect. But perennial herbs can't protect the slope from deep surface erosion and they are not tall enough to create the original naturalness at the boundary parts of existing woodlands. This study is about the slope revegetation method using nutritional propagation capacity of plants and the experimental construction was carried out on the cut-slope of Yongin Hoam C.C. We dug several trenches to a depth of 80cm and at intervals of 150cm from each other. After placing various kinds of live branches(Salix species) into the trench, we backfilled with the excavated soils and finally sprayed water mixed with soil-stabilizer, fertilizer. As six months passed, we made a vegetation research and check the slope surface erosion. Vegetation research was performed in examining the frequency of each block using transect method. 31 kinds of plant species appeared in total area($113.6m^2$) and the dominant species are Setaria viridis, Artemisia rubripes, Persicaria pubescens, Plantago asiatica, Cyperus amuricus, Commelina communis. Among the examined blocks, '아', the top part of the slope, showed the ratio of 1.4 as the highest Alpha-diversity. With regard to life form, therophytes were shown dominant distribution of 58% of total species and neophytes relatively low distribution of 16%. It can be estimated that there is no ecological stabilization of this slope, because of ruderal species' occupation of 74% in total area. Regarding the slope stabilization, the serious surface erosion didn't take place in spite of heavy rainfall this year, but a little surface erosion took place at the block where no other species coming from outside of the site were found.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.19-26
• /
• 2016

Previous research has shown that people perceive the larger volume for tall and lean cylindrical containers over short and wide containers of the same volume (e.g., Raghubir & Krishna, 1999; Wansink & Van Ittersum, 2003). The present research demonstrated that this elongation effect is reversed for boxes, presumably due to the affordance of the boxes. Two studies showed that participants judge short and wide boxes as having larger volume than long and lean boxes of the same volume. This effect replicated through two types of presentation formats (drawing, Study1; actual object, Study2) when the choice between two boxes was forced (Study 1) and not (Study 2). The results also replicated among participants residing in the U.S. (Study 1) and participants residing in Korea (Study 2). The reversed elongation effect held for liquid materials in general (water, Study 1; drinks, Study 2). Theoretical and managerial implications are discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1046-1056
• /
• 2001

For the purpose of standardizing sizing systems for infants and children's clothing, the researchers surveyed 20 different apparel manufacturers in Korea. The apparel production sizing systems used in the industry were analysed. The researchers also compared standard apparel sizing systems developed for infants and children's clothing in Korea. ISO, Japan, and U.S.A. The followings are the results of this study. 1. As survey findings of companies's views about sizing systems, boys or girls sizing system needed to be developed for 3 years old and over. The plus sizes are needed to be developed and children 9 years old and over need the plus size. 2. The body size specification in most sizing systems collected shows that chest circumference was increased 2cm for every infants sizes, and 3cm for boys and girls'sizes, from size 100 to size 130. However, the chest and waist circumference measurements were increased 4 to 8cm for large sizes, from size 130 to size 170. 3. There are similarity and dissimilarity among the standard sizing systems of ISO, Japan(JIS), U.S.A(ASTM), and Korea(KS). The ASTM developed infants'garment sizes for the babies who are 24months old and under. The most national standards, however, developed infant apparel sizing system for the babies under 105cm tall or 4 years old. 4. The range of body measurements covered by boys/girls sizing system were different by the nation. The U.S. system (ASTM) is for boys and girls who are taller than 120cm. The Japanese system(JIS) is for the children who are taller than 90cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.3 s.162
• /
• pp.364-375
• /
• 2007

The propose of this study is to develop the optimal sizing system of ready-to-wear far elementary school boys using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school boys between 7 to 12 yeiws old. The results were as follows: 1. Height group includes 9 types of heights: 115, 120, 125, 130, 135, 140, 145, 150 and 155. 2. In the case of short children's groups, the variance in bust girth and waist girth is narrow. The people cluster together around the average. The size deviation of ready-to-wear is small. 3. In the case of tall children's groups, the variance in bust girth and waist girth is wide. The people spread widely around the average. The size deviation of ready-to-wear is large. 4. The optimal size system is suggested considering the weight of growth exponent of children according to their respective ages. Clothing companies can selectively choose sizes that meet the target of their brands. 5. It suggests the body sizes chart, which based on their means by the middle size children for each height group, so that clothing companies make use of it.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.545-554
• /
• 2017

Among various applications of the High Altitude Long Endurance (HALE) Unmanned Aerial Vehicle (UAV), this paper has a focus on the Global Positioning System (GPS) utilizing pseudolite and its improved performance, particularly during the multi-purpose missions. In a multi-purpose mission, the HALE UAV follows a specified flight trajectory for both navigation applications and missions. Some of the representative HALE missions are remote exploration, surveillance, reconnaissance, and communication relay. During these operations, the HALE UAV can also be an additional positioning signal source as it broadcast signals using pseudolite. The pseudolite signal can improve the availability, accuracy, and reliability of the GPS particularly in areas with poor signal reception, such as shadowed regions between tall buildings. The improvement in performance of navigation is validated through simulations of multi-purpose missions of the solar-powered HALE UAV in an urban canyon. The simulation includes UAV trajectory generation at stratosphere and uses actual geographical building data. The results indicate that the pseudolite-equipped HALE UAV has the potential to enhance the performance of the satellite navigation system in navigationally degraded regions even during multi-purpose operations.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.3-15
• /
• 2010

The high-rise building is a dramatic phenomenon and a powerful expression of architecture in the modern civilization. The architecture of these high-rise buildings has been developed with mutual contributions of architectural aesthetic form and advanced technologies. Architecturally the significant evolution of tall buildings from ancient towers is a "change of function" from some religious symbols to a commercial concept that has aesthetically become acceptable with the changing of modern society and culture driven by a technological evolution. Generally, this commercial function in the evolution of high-rise building is office where high-rise working style is simply a necessity to meet quantitative market demands since this style in major cities around world has been changed from low-rise to high-rise during the last several decades in influenced of the modern industrial society. To achieve optimum spaces with architectural aesthetics in the high-rise building, the design has become collaborative, requiring the input of architects, engineers, economists, and other consultants. Hence, architects must deeply understand the basic planning theories of high-rise buildings and try to find optimum planning between architectural aesthetics and other issues. For the approach, we can firstly start with measurement and analysis of the planning use situation for major planning issues of high-rise buildings in practice. Therefore, this study is to analysis Design Elements and to find commonly used planning strategies, tectonic, of high-rise building in practice. It will give a chance to confirm commonly used planning and then becomes the starting point of the planning development of high-rise buildings based on practical planning issues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1221-1227
• /
• 2013

This study aims to establish the prevalence and risk factors of knee pain. Study subjects in this survey were 306 farm workers of the two-Myon, Keumsan-Gun, Chungnam-Do. Collected data was self-administered questionnaires that were investigated in February 1 to march 31, 2012, about the existence of knee pain, age, sex, height, weight, and the type of farm work. As a results, females had more knee pain than males. Aging was a major cause of knee pain in both genders. About half of persons over 60 years old had knee pain. Tall and heavy females had more knee pain than short and light females, but this trend was not observed in males. these results represent fundamental data for prevention of knee pain.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.93-105
• /
• 2008

This study was for the analysis of Kinematic variables, using 3 types of starting block position setting(25cm, 40cm, 35cm). The subjects of the study were 8 short-distance male runners. In the study, the most desirable block setting type for the runner who were average 180cm tall to get the good record was 45cm (distance between the starting line and the front block) and 40cm (distance between the blocks). In conclusion, the most favorable start in 100m race was to get the strongest propelling power at the start line. The most important technical point was quick responding ability to the start signal and reaching the maximum speed at the shortest time through the strong kick using the front leaning body angle and gravity. Type B start method has shown the most effective results for the improvement of the records in the 100m race.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.425-441
• /
• 2010

Forages are the backbone of sustainable agriculture. They includes a wide variety of plant species ranging from grasses, such as tall fescue and bermudagrass, to herbaceous legumes, such as alfalfa and white clover. Abiotic stresses, especially salinity, drought, temperature extremes, high photon irradiance, and levels of inorganic solutes, are the limiting factors in the growth and productivity of major cultivated forage crops. Given the great complexity of forage species and the associated difficulties encountered in traditional breeding methods, the potential from molecular breeding in improving forage crops has been recognized. Plant engineering strategies for abiotic stress tolerance largely rely on the gene expression for enzymes involved in pathways leading to the synthesis of functional and structural metabolites, proteins that confer stress tolerance, or proteins in signaling and regulatory pathways. Genetic engineering allows researchers to control timing, tissue-specificity, and expression level for optimal function of the introduced genes. Thus, the use of either a constitutive or stress-inducible promoter may be useful in certain cases. In this review, we summarize the recent progress made towards the development of transgenic forage plants with improved tolerance to abiotic stresses.

• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.124-136
• /
• 2009

This study was focused on classifying lower-body trunk and revealing the lower-body characteristics of the Chinese males in their 20s through 40s for their slacks pattern design. Compared with the 20s, the subjects in their 30s and 40s had small vertical and big horizontal sizes and showed a somatotype difference through a horizontal change. According to the size of absolute values, the lower body of Chinese men was "tall and normal trunk"(43.9%). Based on the shape of index values, Type 3(40.3%) was representative with average hip-surface length, waist-hip width difference and long upper hip. While Type 3 was seen a lot in the 20s(51.8%), 30s and 40s were each represented by Type 2(47.1%) with the smallest waist-hip width difference, average upper hip, and long hip-surface length and Type 1(45.9%) with small waist-hip width difference, average upper hip, and short hip-surface length. As this study is confined to Ningbo City of Zhejiang Province and has a small number of subjects, the generalization of the findings should be more serious. Further research will be centered on the development of slacks patterns in consideration of the body type changes.