• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2010

This paper presents the experimental results of the radial piston type oil pump with new mechanism for a metal diaphragm hydrogen compressor. Generally, metal diaphragm type hydrogen compressor systems are operated by oil hydraulic power. In this system an oil compensating pump has been demanded to compensate for a leakage oil head chamber. The metal diaphragm type hydrogen compressor consists of an oil compensating pump, commonly used hydraulic piston pump and driven by main crank shaft. The radial piston type oil compensating pump with new rolling contacted piston mechanism is developed and experimented. The developed piston element of the radial piston pump consists of piston, steel ball, return spring, two check valves, eccentric cam and ball racer. In this study, designed 4 type pistons as and orifice hole. Operating characteristics and pressure ripple characteristics are tested under no load to 60bar loaded with every 20bar increasing step and pressure ripple and flow rate are experimentally investigated.

• Journal of Plant Biotechnology
• /
• v.6 no.3
• /
• pp.145-150
• /
• 2004

Cabbage plants were transformed with the potato proteinase inhibitor II (PINII) gene, bar gene, and hpt gene using Agrobacterium. The expression of the PINII gene was driven by its own promoter which was wound-inducible. Ten transgenic plants were obtained from medium containing hygromycin as a selection antibiotic. The integration and expression of PINII and bar genes were confirmed by Southern and Northern hybridization. Growth and development of diamondback moths (Plutella xylostella) and tobacco cutworm (Spodoptera litura) larvae were examined on $T_1$ plants. The weight of the larvae and pupae of these two insects grown on transgenic plants was not different compared to those grown on wild type plants. However, the pupation and emergence rate of diamondback moths and tobacco cutworms fed on some transgenic plants was lower than on wild type plants. These results suggest that the PINII transgene under the control of a wound-induced promoter may be used for control of insects in transgenic cabbage through reduction of insect progeny number.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.251-257
• /
• 2020

This study was performed to verify the possibility of nitrification and denitrification in a single reactor. In batch type experiment, optimal point of experimental conditions could be found by performing the experiments. When supply location of microbubbles was located at half of width of the aeration tank and operating pressure of 0.5 bar, it was possible for zones in the aeration tank to be separated into anoxic and aerobic by controlling air suction rate according to operating pressure of the generator. To be specific, the concentration of dissolved oxygen (DO) in zone 1 and 2 of the aeration tank could be maintained as less than 0.5 mg/L. Also, in the case of concentration of oxygen in zone 3 and 4, the concentration of DO was increased up to 1.7 mg/L due to effects of microbubbles. In continuous flow type experiment based on the results of batch type experiments, the removal efficiency of nitrogen based on T-N was observed as 39.83% at operating pressure of 0.5 bar and 46.51% at operating pressure of 1 bar so it was able to know that sufficient air suction rate should be required for nitrification. Also, denitrification process could be achieved in a single reactor by using ejector type microbubble generator and organic matter and suspended solid could be removed. Therefore, it was possible to verify that zones could be separated into anoxic and aerobic and nitrification and denitrification process could be performed in a single reactor.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.651-657
• /
• 2016

The purpose of this research was to examine the possibility on the recycling of foodwaste leachate as external carbon sources using microbubble. The following operating conditions were selected: pressurizing tank 3 bar, circulation flow rate 3.65 LPM, and air flow rate 0.3 LPM with batch type. Microbubble contact time of 18 hours is optimal time to satisfy the recycling of foodwaste leachate as external carbon sources with batch type. HRT 18 hours came up to standard for external carbon sources, except for T-P concentration with continuous type. Coagulants need to be used for removal of dissolved phosphorus concentration by more than 88.5% of the total phosphorus concentration. The VFA was influenced by the organic decomposition rate and the concentration in the aerobic condition. It was considered that the VFA was needed for selection the optimal HRT or the addition of acid fermentation process in order to meet recycling standard of foodwaste leachate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.7-16
• /
• 1981

The technology of precision attachments has developed at such a pace that from a very few T-shaped attachments and bar attachments from the years 1915 to 1935 since removable bridge utilizing a T-shaped intracoronal attachment was constructed by Dr. Herman E.S. Chayes in 1906. There are now more than 120 models of the most diversified designs, ready made or laboratory fashioned. In 1971, 126 attachments were listed and classified by Mensor in his E M Attachment Selector. This selector consists of five charts giving specifications as to type, vertical dimensions, application, type of resilience, size of movement, type of retention and type of material and alloy. Thus the E M Attachment Selector is a useful guide for dentists to choose the attachment for his patients. But dentists should apply the attachment in each patient's case according to an accurate diagnosis and treatment plan. This paper is a case report of removable partial dentures utilizing CSP, PD and Bar attachment on a patient who needed full mouth reconstruction. Patient has right first, second molar and left first molar on the upper arch and also left first molar, first premolar and right canine on the lower arch. (Fig. 5)All remaining teeth are relatively healthy in their supporting tissues. On upper arch, ring shape CSP attachment was designed on left first molar and modified ring shape CSP attachment was designed on right first and second molar as the direct retainer of the removable partial denture. Full palatal coverage was used as the major connector in this case. (Fig. 23) On lower arch, author first splinted with a fixed bridge between left first molar and second premolar and a splint bar between left second premolar and right canine. (Fig. 11) A lower removable partial denture in which was designed with an Aker clasp on the left first molar and a PD attachment on .the right canine was constructed. (Fig. 17) This denture could get additional support from anterior splint bar. After both removable partial dentures were delivered to the patient (Fig. 26), author evaluated function of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of this case was excellent.

• Journal of Families and Better Life
• /
• v.22 no.6 s.72
• /
• pp.133-142
• /
• 2004

The purpose of this study was to investigate the spatial composition characteristics of elderly housing facilities in Korea, in order to refer them in establishing the basic plan for elderly housing in Korea. The case study performed in this study from October 16 to October 31 is based on ten housing facilities for the elderly in KOREA. During the site visits, the interview with the custodians, survey of the space, picture taking and diagram gathering were carried out. The results of this study were as follows; 1. The type of floor plan was classified into ㅁ type, L type, and ㅡ type. And they hadn't an outside space called a garden(courtyard). 2. The kinds of common spaces could be grouped as the space for basic living, for leisure, and for convenient living. Also it was all common that the housing facility had common diningroom laundry room once, and activity room. The type of the common spaces was categorized into three types, the centralized type where the shared space was located at the center of the housing facilities, the distributed type, depending on the degree of separation between common spaces and units, and another each building type. 3. The kinds of units was classified into studio, oneroom, one bedroom and two bedroom. 4. Elevator, safety grab bar, emergency bell, and the door handle of lever or bar type were placed in these facilities.

• Asian Journal for Public Opinion Research
• /
• v.7 no.2
• /
• pp.94-112
• /
• 2019

Objective: The objective of this study was to compare the quality of life (QOL) of patients with end-stage renal disease (ESRD) between patients receiving hemodialysis (HD) and patients receiving continuous ambulatory peritoneal dialysis (CAPD) and to compare personal characteristic factors relating to the quality of life in patients with ESRD. Method: This study used a descriptive research design. The sample was recruited using purposive sampling that included 76 ESRD patients receiving either HD or CAPD at a dialysis clinic in Phraphutthabat Hospital, Saraburi Province, Thailand. Data was collected using the Quality of Life Questionnaire for Chronic Kidney Disease ($KDQOL-SF^{TM}$) version 1.3. Independent t-test and ANOVA procedures were used to analyze study data. Results: The results revealed that the HD patients had a moderate level of QOL. The highest scoring dimension of QOL was the encouragement of staff at the dialysis unit and patient satisfaction with the treatment (${\bar{X}}=100$, SD=.00), followed by social support (${\bar{X}}=89.29$, SD =16.88) and cognitive function (${\bar{X}}=88.57$, SD=11.82). On the other hand, the lowest scoring QOL dimension was physical problems (${\bar{X}}=50$, SD=51.89), and pain (${\bar{X}}=50$, SD=39.03), followed by work status (${\bar{X}}=53.57$, SD=45.84) and burden from kidney disease (${\bar{X}}=58.48$, SD=31.07). The CAPD patients also had a moderate QOL. The highest scoring QOL dimension was the encouragement of staff in the renal unit and patient satisfaction with the treatment (${\bar{X}}=100$, SD=.00), followed by social support (${\bar{X}}=95.61$, SD=14.20) and cognitive function (${\bar{X}}=88.83$, SD=13.52). The worst scoring QOL dimensions were work status (${\bar{X}}=44.44$, SD=42.72), general health (${\bar{X}}=53.61$, SD=39.05), and pain (${\bar{X}}=62.70$, SD=41.14). The difference overall and in each dimension of QOL in ESRD patients who were treated with HD and CAPD was not statistically significantly different. The QOL was not significantly different among patients with different personal characteristics except for income and duration of treatment; in those cases, the difference in QOL was statistically significant (p=.05). Conclusion: The overall QOL and life expectancy of patients with ESRD treated with HD and CAPD are not affected by gender, age, marital status, education, occupation, or type of health coverage. QOL was not significantly different, except for patients with different incomes and duration of renal replacement therapy, whose QOL was significantly different. The QOL of patients receiving dialysis should be studied to develop a QOL program for patients with chronic kidney disease who receive dialysis.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.7-13
• /
• 2005

With the appearance of pathogenic microorganisms, which were resistant to free chlorine, the significant attention to the necessity of powerful alternative disinfection methods such as ozone, chlorine dioxide, LTV irradiation to inactivating pathogens has been increased in water treatment. Among these alternative disinfection methods, ozone is well known as strong biocidal method and the usage of ozone is also increasing in Korea. However, in Korea, there has been no report on the quantitative study of Cryptosporidium parvum with ozone and its evaluation in advanced drinking water treatments. This study reports on the methodology for predicting the ozone inactivation of Cryptosporidium parvum by ozone disinfection in advanced drinking water treatment. The method is based on the fact that a specific inactivation level of microorganisms is achieved at a unique value of ozone exposures, independent of ozone dose and type of water, and quantitatively described by a delayed Chick-Watson model. The required values ${\bar{C}}T$ for 2 log inactivation of Cryptosporidium parvum was $6.0mg/L{\cdot}min$ and $15.5mg/L{\cdot}min$ at $20^{\circ}C$ and $5^{\circ}C$, respectively. From this obtained Cryptosporidium parvum inactivation curves and calculated ${\bar{C}}T$ values of advanced drinking water treatment water in Korea with FIA (Flow injection alaysis), we can predict that water treatment plant can achieve a 1.1~1.8 log inactivation and 0~0.4 log inactivation at $20^{\circ}C$ and $5^{\circ}C$, respectively. This methodology will be useful for drinking water treatment plants which intend to evaluate the disinfection efficiencies of their ozonation process without full scale test and direct experiments with Cryptosporidium parvum.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.4-27
• /
• 2012

The five capital(五京) was installed in the $Li{\acute{a}}o$(遼) Dynasty. $Sh{\acute{a}}ngj{\bar{i}}ng$(上京) was the main capital city of the $Li{\acute{a}}o$(遼) Dynasty. $Zh{\bar{o}}ngj{\bar{i}}ng$(中京) was the second capital(陪都); and the other three was the capital city with symbolic meaning. The layout of $Sh{\grave{a}}ngj{\bar{i}}ng$ was the '日-shaped plan; this was newly advent structure of ancient Chinese capital city system. $Zh{\bar{o}}ngj{\bar{i}}ng$(中京) was surrounded by multiple ramparts influenced by the $Bi{\grave{a}}nli{\acute{a}}ng$ Fortress (?梁城). Three capitals, Nanjing(南京), $X{\bar{i}}j{\bar{i}}ng$(西京) and $D{\bar{o}}ngj{\bar{i}}ng$(東京), were reconstructed on the foundation of the previously constructed town in $T{\acute{a}}ng$(唐) or Bohai(渤海) Fortress (舊城). The structure and Planning of $Sh{\grave{a}}ngj{\bar{i}}ng$(上京) in the $Li{\acute{a}}o$(遼) Dynasty, had significantly influenced in the capital city planning of the $J\bar{i}n$(金), $Yu{\acute{a}}n$(元) and Qing(淸) Dynasties of China

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5419-5424
• /
• 2014

A weld scallop is a small quadrant or half circle type hole installed in the weld line cross area for easy welding operation. Many types of T-bars with a scallop can be welded in a block assembly stage in shipbuilding. The difficulties arise from the fact that scallops are to be filled by build-up welding after welding of the cross line is complete. In this study, a non-scallop block joint welding method was developed using special type CBM (ceramic backing material). The wedge shaped CBM was devised to insert a CBM into just the V groove of weld line cross area without weld scallop. A saw-toothed shape was adopted for easy cutting of the unnecessary part in the CBM fitting process. The applicability of the developed method was verified through welding experiments based on the yard welding conditions.