• 음성과학
• /
• 제11권3호
• /
• pp.131-142
• /
• 2004

Speaker identification system basically functions by comparing spectral energy of an individual production model with that of an input signal. This study aimed to develop a new speaker identification system from two parameters from the spectral energy of numeric sounds: difference sum and correlation coefficient. A narrow-band spectrogram yielded more stable spectral energy across time than a wide-band one. In this paper, we collected empirical data from four male speakers and tested the speaker identification system. The subjects produced 18 combinations of three-digit numeric. sounds !en times each. Five productions of each three-digit number were statistically averaged to make a model for each speaker. Then, the remaining five productions were tested on the system. Results showed that when the threshold for the absolute difference sum was set to 1200, all the speakers could not pass the system while everybody could pass if set to 2800. The minimum correlation coefficient to allow all to pass was 0.82 while the coefficient of 0.95 rejected all. Thus, both threshold levels can be adjusted to the need of speaker identification system, which is desirable for further study.

• 산업기술연구
• /
• 제19권
• /
• pp.127-133
• /
• 1999

This paper is a research about system identification which optimizes uncertain geothechnical properties from the data measured during geotechnical design and construction. Various numerical optimization algorithms of Simplex method, Powell method, Rosenbrock method and Levenberg-Marquardt method were applied to the excavation problem to determine which method showed the best results with respect to robustness of success in finding an optimal solution to within a certain accuracy and number of function evaluations. From the results of numerical analysis, all of four algorithms are converged to exact solution after satisfying the allowed criteria, and Levenberg-Marquardt's algorithms was identified to be the most efficient method in number of function evaluations. System identification was applied to geotechnical engineering problems, possibly being occurred in field, to verify its applicability : estimation of settlement due to self-weight consolidation in dredged and filled soil. For self-weight consolidational settlement of a dredged soil, a program of evaluating the constitutive relationship of effective stress-void ratio-permeability was developed by using the technique of system identification. Thus, consolidational characteristics of a dredged soil, having a very high initial void ratio, can be evaluated.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.273-286
• /
• 2022

In recent years, vision-based monitoring has received great attention. However, structural identification using vision-based displacement measurements is far less established. Especially, simultaneous identification of structural systems and unknown excitation using vision-based displacement measurements is still a challenging task since the unknown excitations do not appear directly in the observation equations. Moreover, measurement accuracy deteriorates over a wider field of view by vision-based monitoring, so, only a portion of the structure is measured instead of targeting a whole structure when using monocular vision. In this paper, the identification of structural system and excitations using vision-based displacement measurements is investigated. It is based on substructure identification approach to treat of problem of limited field of view of vision-based monitoring. For the identification of a target substructure, substructure interaction forces are treated as unknown inputs. A smoothing extended Kalman filter with unknown inputs without direct feedthrough is proposed for the simultaneous identification of substructure and unknown inputs using vision-based displacement measurements. The smoothing makes the identification robust to measurement noises. The proposed algorithm is first validated by the identification of a three-span continuous beam bridge under an impact load. Then, it is investigated by the more difficult identification of a frame and unknown wind excitation. Both examples validate the good performances of the proposed method.

• 한국임상수의학회지
• /
• 제13권2호
• /
• pp.171-176
• /
• 1996

In this study, dldctronic identification system of individual dairy cow was developed for autocatization of stoxkvreeding management. To automize the breeding management, it is necessary to obtain and analyze the individual information distinguished from others perferentially. Electronic identification system can distinguish individual livestock from others with electromagnetic wave signal recognition system. Electoronic identification system consists of transmitter transmitting the oscillated signal and receiver set. The transmitted signal from transmitter clung to individual livestock is received from the receiving antenna and the signal in different according to the established value of the register. By distinct signal recieved from the reciever, wi can distinguish the identity of a livestock from others clearly. This system can manage $2^{12}$ individuals with a reciever theoretically. However in order to reduce the errors by analogous signal, this system uses only triple number and can manage 1365 individuals with a reciever practically. This system can be connevtted to Max 232 and microcomputer for the breeding management efficiently.

• 한국건설관리학회논문집
• /
• 제4권2호
• /
• pp.109-117
• /
• 2003

건설사업은 그 규모와 복잡성으로 인하여 다른 산업에 비해 위험에 대한 노출수위가 크고, 그 형태도 다양하다. 따라서, 건설사업에서 위험을 인지하고 대응하는 일련의 위험관리 과정은 정확하고 체계적으로 수행되어야 한다. 위험관리 과정에서 위험인지 단계는 다양한 위험요인의 인지와 그 위험의 성격을 규정하는 단계이고. 이러한 위험인지 단계에서 위험분류체계는 사업에 내재된 다양한 위험을 인지하게 해주는 유용한 도구이다. 본 연구에서는 기존 위험분류체계의 문제점을 개선하고 재정립함으로서, 실질적인 건설사업에서 위험인지 도구로서 활용될 수 있는 사업단계별, 계약주체별 체크리스트를 제안하였다.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.693-700
• /
• 2003

Universal AIS, which has been adopted officially for automatic identification systems among regulated ships by SOLAS, should be installed, for example, on all passenger ships over 300 tons engaged in international voyage and over 500 tons in domestic voyage, sequentially from 2002 to 2004. We must not overlook the fact than-ruled regions by regional authorities in the case of VTS. Actually a major portion of accidents have happened in small vessels like fishing vessels. However, they are not equipped with automatic identification tools, due to the high costs of the equipment for identifying purposes, as well as the absence of regulation In this paper, we researched the alternative of automatic identification for small vessel instead of universal AIS. We analyzed the requirement of automatic identification for small vessel about wireless communication method, traffic volume, etc. We proposed the identification system for small vessels in local areas and developed the Local Vessel Identification System (LVIS) interoperable with universal AIS using a PDA platform and wireless network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권5호
• /
• pp.1755-1777
• /
• 2022

The development of wireless communication technology has led to the underutilization of radio spectra. To address this limitation, an intelligent cognitive radio network was developed. Specific emitter identification (SEI) is a key technology in this network. However, in realistic non-cooperative scenarios, the system may detect signal classes beyond those in the training database, and only a few labeled signal samples are available for network training, both of which deteriorate identification performance. To overcome these challenges, a meta-learning-based open-set identification system is proposed for SEI. First, the received signals were pre-processed using bi-spectral analysis and a Radon transform to obtain signal representation vectors, which were then fed into an open-set SEI network. This network consisted of a deep feature extractor and an intrinsic feature memorizer that can detect signals of unknown classes and classify signals of different known classes. The training loss functions and the procedures of the open-set SEI network were then designed for parameter optimization. Considering the few-shot problems of open-set SEI, meta-training loss functions and meta-training procedures that require only a few labeled signal samples were further developed for open-set SEI network training. The experimental results demonstrate that this approach outperforms other state-of-the-art SEI methods in open-set scenarios. In addition, excellent open-set SEI performance was achieved using at least 50 training signal samples, and effective operation in low signal-to-noise ratio (SNR) environments was demonstrated.

• 한국공간구조학회논문집
• /
• 제3권4호
• /
• pp.53-58
• /
• 2003

In order to control seismic responses of building structures effectively and stably, it is very important to estimate the dynamic characteristics of target structure exactly based on input-output signal data. In this paper, it is shown that Subspace Identification Method is able to be applied effectively to system identification of building structures. To verify the efficiency of Subspace Identification Method, the vibration experiments were conducted on a specimen structure which is a 5-storied building structure model consisted of H-shaped steel beam, and the simulated seismic responses of the identified structure model were compared with the observed ones under the same excitation. It was observed that the experimental results coincided with the analyzed ones proposed in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.120-123
• /
• 2005

A dynamic system identification technique based on the topology optimization method is developed. The specific problem in consideration is the damage location identification of a plate structure using the Frequency Response Function (FRF) of a damaged structure. In this work, the identification problem is formulated as a topology optimization problem. The importance of using anti-resonance information in addition to using resonance information is addressed. Though a simple problem was considered here, the possibility of using the topology optimization for damage identification is investigated lot the first time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.140-145
• /
• 1994

In this paper, we consider a problem to estimate process parameters using input-output data collected from the process operating in closed-loop control system. When orders and delay-time of the process are known correctly, under some conditions of identifying experiments, it is reported that accurate identification results can be obtained by applying prediction error method. To get accurate estimates, it is necessary to know orders and delay-time of the process. It is difficult to determine them in closed-loop identification, because ill-condition for identification are easily caused by selection of unsuitable order or delay time. Furthermore, the procedures to select orders and delay-time in open-loop identification aren't always available in closed-loop identification. The purpose of this paper is to determine a delay-time under suitable assumption that order of the process are known as the first step.