• Journal of Pharmacopuncture
• /
• v.18 no.1
• /
• pp.79-85
• /
• 2015

Objectives: A vertebral compression fracture (VCF) is characterized by back pain and fracture of a vertebral body on spinal radiography. VCFs of the thoraco lumbar spine are common in the elderly. In general, appropriate analgesics should be prescribed to reduce pain and, thus, promote early mobilization. The ideal treatment approach for VCFs has not been determined. In Korea, acupuncture and herbal medication have been used to treat VCFs for many years. There is empirical evidence that acupuncture might benefit patients with a VCF. However, no randomized, controlled, clinical trials evaluating the efficacy and the safety of acupuncture for treating a VCF have been published. Therefore, we designed a randomized, controlled, pilot, clinical trial to obtain information for the design of a further full scale trial. Methods: A five week protocol for a randomized, controlled, pilot, clinical trial is presented. Fourteen patients will be recruited and randomly allocated to two groups: a control group receiving interlaminar epidural steroid injections once a week for three weeks, and an experimental group receiving interlaminar epidural steroid injections plus acupuncture treatment (three acupuncture sessions per week for three weeks, nine sessions in total). The primary outcomes will be the pain intensity (visual analogue scale and PainVision$^{TM}$ system). The secondary outcome measurements will be the answers on the short form McGill pain questionnaire and the oswestry disability index. Assessments will be made at baseline and at one, three, and five weeks. The last assessment (week five) will take place two weeks after treatment cessation. This study will provide both an indication of feasibility and a clinical foundation for a future large scale trial. The outcomes will provide additional resources for incorporating acupuncture into existing treatments, such as nonsteroidal anti-inflammatory medications, narcotics and vertebral augmentation. This article describes the protocol.

• Journal of the Korean association of regional geographers
• /
• v.7 no.2
• /
• pp.35-54
• /
• 2001

The construction of Daedeok Science Town, located in Yuseong ward of Daejeon metropolitan city, began in the early 1970s. It started out as a national project to form an agglomeration of the major central government research institutions. Since that time Daedeok Science Town has also attracted private research institutions, mainly during the 1900s. This study geographically analyzes this research institutions to clarify the regional identity of Daedeok Science Town through an integrated approach of existing new regional geography approach, which is characteristics of labour market as the regional pattern of its laborers' residences, spatial labour division, its research network with other institutions, and networks of university, research institution, and corporations, through the spatial spread of intellectual right of property and through network of technology business incubator relationship with spin offs which is appeared to spatial interaction. The results of the study are as follows: First of all, Daedeok Science Town was not only self-sustenance with marketing garden of agricultural regions in the suburb of Daejeon city but also was consign of agricultural products to Daejeon city before 1972. Since that time, the identity of Daedeok Science town has been formed by externally factors of the science development, by the local decentralization of population and public offices in Seoul metropolitan area in terms of the world economy system, and by the internally accessibility maximization of the central location in Korea between 1992 and 1999. On the part of Daedeok Science Town it has some merits of in-migration from nation-wide, and of mother city's Daejeon. Lastly at the period of the venture business beginning after 1999, the role of institution, developing the existing high technology, made great contribution to an attraction of ventures business to here in need of high technology industry growth, including knowledge-based industry in the informated society. On these bases, Daedeok Science Town seems to grow spontaneously as a science park.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.215-234
• /
• 2002

Groundwater Dam is one of the reliable techniques to get huge amount of groundwater abstraction for municipal, agricultural, drinking, industrial water supply system. It can be a major technique to solve water shortage problems when it based on the sufficient watershed, proper topology, and adequate aquifer distribution and pollution control, Groundwater Dam had initiated its construction by RDC(former KARICO) in early eighties in Korea and 4 of it in total were added more until late eighty. However, this technique has shrunken its application due to gradually decreased yield rate after sever years of construction. After we studied several existing sites precisely, we concluded that the main reason of decreasing yield rate was come form engineering roughness on construction in early nineties. Theoretically, the technique itself seemed to be little detectives however, there were a little application in the fields in Korea. With the recent advance in engineering fields, those defects in construction would be no longer obstacle to construct underground wall and the technique could be a one of major ground water production technique in the future. It is essential to study following items thoroughly before select the appropriate site. The topography and the site of the underground wall, aquifer distribution, the specific technique for wall construction to block groundwater flow effectively and strict quality control during construction are critical. The surface and ground water monitoring data should be collected. Sustainability of the Groundwater Dam with huge groundwater abstraction in long term should be based on the long-term water balance analysis for each site. The water quality, environmental effect analysis and maintenance achedule should be also analyzed and planned in prior. It is suggested that the two consecutive underground wall in the coastal area to prevent seawater intrusion beneath a single wall.

• School Mathematics
• /
• v.18 no.3
• /
• pp.667-689
• /
• 2016

Value is an intellectual and an affective concept that influences behavior. It does not exist individually but is conveyed through generation with some system. Korean students showed high achievement scores in spite of low emotion in mathematics learning. The objects of value recognition ought to be extended to social value as well as mathematics for balancing intellectual and affective features. Since the value formed at the first step in mathematics learning keeps its influence even after learning, it is important to form a positive recognition in the value. The following conclusions were drawn. First, the mathematics learning value instrument developed in this study. It is appropriate to explain a students' imbalance of intellectual and affective characteristics. Second, it is possible that the intellectual achievement of Korean students are influenced by the others-oriented value in particular. Third, the recognition of the mathematics learning value of elementary school students would have an influence on secondary school learning. Therefore, education for parents of elementary school students is required. This study can provide a basis on the view of the mathematics learning value which influences the educational result of Korean elementary students as well. It is expected from the following studies that focus on improving affective characteristics on mathematics learning of Korean students is beneficial.

• Korean Journal of Community Nutrition
• /
• v.13 no.4
• /
• pp.463-475
• /
• 2008

This study investigated intake patterns of health functional foods(HFF) in elementary school children and requirements of their parents in the Daejeon area using a questionnaire by 432 parents. Participating parents were composed of female, 83.6% and male, 16.4%. Most of the parents were in their 40's(53.0%) and 30's(45.8%). 47.9% of the children were male and 52.1% were female. The school year of the children was distributed evenly, ranging from the first year to the sixth year. The intake rate of HFF for parents appeared to be 65.3% and for children it appeared to be 63.2%. The primary reason of using HFF to their child was 'For health promotion'(54.4%); the largest reason of non-using HFF was 'Do not feel necessity because is healthy'(48.8%). In regards to purchase place, 'Drugstore' was most selected by 26.1%, while the largest amount of purchase motive was 'Decided by oneself for children's health'(37.7%). The average expense per month was, 'Less than 50 thousand portion'(20.3%). The intake period, 'less than 6 months' was won' for 54.9%. For intake items, 'Vitamin supplementation products' was the largest portion'(20.3%) was indicated. The intake period, less than 6 months' was the most selected by 51.3%. Most people(66.7%) selected '1 kind' of intake item. As for intake effect, 45.4% claimed 'A little help'. In regard to experiencing side effects, 'Is not' was 92.7%, however, diarrhea, nettle rash, nausea etc. were a little. The biggest problem of HFF was 'Falsehood/exaggerative advertisement' as identified by 53.1%. For improvement of the HFF system was, 'Verify by more strict formality' as selected by 55.8%. In regards to experience of nutrition education on HFF, 'Is not' was most selected by 51.0%. The most desirous form of nutrition education was, 'Simple paper material'(31.3%). The most desirous content of nutrition education was, 'nutritional management of classified by life cycle'(37.2%). Therefore, HFF must be used properly to promote the health and growth development of children by acquiring scientific and reasonable information about the ability and usage of the food.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1333-1342
• /
• 2008

This study intended to evaluate the visual sensibility of textiles of knitting simulation through the painting function of SDS-ONE, a computer knitting system, with the use of various fancy yarns for hand knitting. For this study, six kinds of fancy yarns with difference manufacturing style and form were selected: loop yarn, tamtam yarn, fur1 yarn, fur2 yarn, ladder yarn, and tape yarn. In order to create a computer knitting simulation, paint function of SDS-ONE was employed to scan the fancy yarns for hand knitting with a scanner. Then, after the registration of the yarns as data, the yarn was brought in for knitting simulation in plain stitch with 3 gauge. After that a survey was conducted involving 60 female experts in their twenties. Using SPSS 12.0, factor analysis, reliability, Pearson correlation coefficient, ANOVA, Duncan test, and regression analysis were performed to analyze the collected data. First, according to the result of analyzing the visual sense factor, three factors of the 'inflexibleness/ruggedness sense', 'lightweight sense', and 'smoothness sense' was extracted. According to the result of analyzing the visual sensibility factor, three factors of the 'activity', 'grace', and 'purity' was extracted. Second, With regard to preference and purchase intention, the knitted fabric with tamtam yarn(H2) was preferred than the other samples, indicating that the respondents had intention to purchase it. As for word-of-mouth intention, H2 ranked the first place, implying the respondents had intention to recommend it to other people. Third, the examination of the use of products each knitting simulation knit found that sweater and muffler are the most appropriate knit products. And H2 was the most suitable sample for sweater and muffler products. This study tried to prove that knit textile can be visually evaluated through a computer knitting simulation without the actual knitting and then to provide accurate data to related companies or the academic circle.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.565-571
• /
• 2010

An innovative application of surfactant-enhanced air sparging(SEAS) technique was developed in this study. Using a laboratory-scale physical model packed with water-saturated sand, air sparging was implemented to remove water-dissolved toluene that was introduced into a specific depth of the system with finite vertical width prior to sparging. An anionic surfactant(Sodium dodecylbenzene sulfonate) was introduced into the contaminated layer as in dissolved form in the toluene-contaminated solution for SEAS, whereas no surfactant was applied in the control experiment. Due to the suppressed surface tension of water in the surfactant(and toluene)-containing region, the toluene removal rate increased significantly compared to those without surfactant. More than 70% of the dissolved toluene was removed from the contaminated layer for SEAS application while less than 20% of toluene was removed for the experiment without surfactant. Air intrusion into the contaminated layer during sparging was found to be more effective than that without surfactant, enhancing air contact with toluene-contaminated water, which resulted in improved volatilization of contaminant. This new method is expected to open a new option for remediation of VOC(volatile organic compound)-contaminated aquifer.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.479-485
• /
• 2002

본 연구는 초음파를 이용하여 한우도체의 연도를 비파괴적이며 객관적으로 측정할 수 있는 시스템을 개발하기 위해서 수행되었다. 한우도체 연도 측정 시스템은 크게 초음파 측정장치, 자동 탐촉자 수직이동장치, 데이터 획득 및 분석장치로 구성되었는데 초음파 측정장치는 초음파 pulser/receiver 및 탐촉자, 자동 탐촉자 이동장치는 상하운동부, 구동부, 제어부, 데이터 획득 및 분석장치는 digitizer, Labview 5.1을 사용하여 구성되었다. 통합된 시스템을 이용하여 획득된 도체의 초음파 신호를 분석하기 위해 1.0~1.1 MHz의 bandpass filtering을 거쳐 hilbert 변환을 이용, envelope를 구할 수 있었으며 탐촉자와 도체의 최적 접촉 위치를 결정하기 위하여 3단계로 나누어 신호분석을 실시하였다. 시료의 개수는 40개였으며 획득된 envelope를 FFT 변환 후 PLS, PCR 분석을 수행한 결과 7단계의 PCR 분석에서 $R^2$= 0.6474의 유의성 있는 결과를 나타내었으므로 최적 접촉 위치로 결정하였다. 최적 접촉 위치를 통해 시료 80개의 추가 실험을 실시한 결과 PCR 분석에서 $R^2$= 0.4304의 결과를 나타내었으며 이를 이용, 도체의 연도를 측정하는 프로그램을 개발하고 최종 통합 시스템을 구축하였다. 본 한우도체 연도 측정 시스템의 개발을 통해 한우도체의 전단력을 예측하여 연도를 객관적으로 판정 가능할 것으로 생각되며 또한 사이즈의 확대로 도축장에 설치하는 설비로서 가능할 것이라 사료된다. 그러나 추후 좀 더 세밀한 측정과 결과의 보완을 위한 분석방법의 개선에 관한 연구가 진행되어야 할 것이다. 사용해 설계된 장치를 사용자가 쉽게 제작할 수 있도록 하였다. 공정설계프로그램을 통해 설계된 공정은 데이터베이스에 저장이 되며 장치설계프로그램에서 쉽게 이전에 설계했던 공정을 이용할 수 있도록 하여 공정 설계와 장치설계를 연계하도록 하였다.동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.8 no.1
• /
• pp.1011-1034
• /
• 1966

This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.