• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.23-24
• /
• 2014

본 논문은 전압원 인버터를 모델 예측 제어 (Model Predictive Control)를 하는데 있어 스위칭 손실을 줄이기 위한 제로 벡터 (zero-vector) 선택 방법을 제안한다. 기존의 전압원 인버터의 모델 예측 제어는 제로 벡터의 중복을 선택하는 방법이 제시되지 않아, 이에 대한 연구가 필요하다. 본 논문에서는 제로 벡터의 중복을 선택하는 방법으로 스위칭 손실을 줄이기 위한 제로 시퀀스 전압을 생성하고, 생성된 제로 시퀀스 전압의 부호를 통해 제로 벡터의 중복을 선택하였다. 따라서 전류의 품질은 그대로 유지시키는 동시에 스위칭 손실을 감소시킬 수 있다. 이를 시뮬레이션으로 검증하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.237-245
• /
• 2002

A new type of RF MEMS switch for low voltage actuation, high broadband application and high power capability is presented. Mechanical and electromagnetic simulations of this new RF MEMS switch type are shown and the fabrication process and measurement results are given. The switching element consists of a cantilever which is fixed by a suspension spring to the ground of the coplanar line. The closing voltage is 16V. The switches exhibit low insertion loss (<0.85dB@30GHz) with good isolation (>22dB@30GHz).

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.90-95
• /
• 2015

This paper describes IEC 61727 standard of Photovoltaic (PV) systems -Characteristics of the utility interface. IEC 61727 standard tests include utility compatibility and personnel safety and equipment protection of PV inverter performance functions. Especially utility compatibility part includes test items of 1) voltage, current and frequency, 2) normal voltage operating range, 3) flicker, 4) DC injection, 5) normal frequency operating range, 6) harmonics and 7) waveform distortion, 8) power factor of PV inverter. Also personnel safety and equipment protection part includes test items 1)loss of utility voltage, 2)over/under voltage and frequency, 3)Islanding protection, 4)response to utility recovery, 5)earthing, 6)short circuit protection, 7)Isolation and switching of PV inverter. In this paper, each item of IEC 61727 standard test is studied and analyzed and finally full tested by PV inverter performance function.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.6
• /
• pp.325-332
• /
• 2003

The loss minimization is one of the most important problems to save the operational cost in distribution systems. This paper presents an efficient method for optimal feeder reconfiguration of distribution systems. Chaos search algorithm (CSA) is used to reconfigure distribution systems so that active power losses are globally minimized with turning on/off sectionalizing switches. In optimization problem, the CSA searches the global optimal solution on the basis of regularity in chaotic motions and easily escapes from local or near optimal solution. The CSA is tested on 15 buses and 32 buses distribution systems, and the results indicate that it is able to determine appropriate switching options for global optimum reconfiguration.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.157-161
• /
• 2000

The electronic ballasts for low pressure discharge lamps are produced and commercialized. However, the electronic ballasts for high pressure lamps are now in progress because of poor reliability and high cost. The major case of troubles with electronic ballasts are thermal destruction of semiconductor output switches due to non ideal i-v characteristics of switch. The loss converts to heat and rises the temperature of switch and it increases proportionally to switching frequency and value of current and voltage. This study shows the variable frequency ballasts which can suppress the heating of switches efficiently. It is used for the limitation the switch current and the rising temperature of switch by impedance variation of lamp inductor. As a result, initial warm-up time of the proposed ballasts was faster than that of magnetic ballasts about 90 msec. Power factor of tested ballasts follow as ; input and output average of magnetic ballasts are 93 [%] and 86 [%], respectively, And proposed ballasts are 97 [%] and 99 [%], respectively.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.149-153
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller. So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.154-157
• /
• 2003

This paper presents a current-source-inverter based on a buck-boost configuration and its application for residential photovoltaic system. The proposed circuit has five switches. Among them, only one switch acts as chopping, and the other determine the polarity of output; therefore, it can reduce the switching loss. Because the input inductor current is operated on the discontinuous conduction mode, high power factor can be achieved without additional input current controller, So the overall system shows a simple structure. The operational modes are analysed in depth, and then it was verified through the experimental results using a 150 [W] prototype equipped with digital signal processor TMS320F241.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.257-260
• /
• 2002

In this paper, the circuit of AC Choppers for $CO_2$laser Power Supply are proposed and investigated. IGBT-controlled ac voltage regulators, operating at high frequency chopping mode. Chopping-to-supply duty ratio plays an important role in terms of laser output. Laser input energy is varied by controlling the leakage transfomer used with the proposed system. This improved circuit employs a 3 electrode-type and Ring Blower. This improved circuit system has many advantages compared with the conventional SMPS such as simple design requirment, easy implementation, high reliability, low switching loss, and consequently high efficiency. As a result, the maximun output was 16W at duty-ratio of 92%, total gas mixture of $CO_2$: $N_2$: He = 1 : 9 : 15, total pressure of 15torr.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.113-122
• /
• 1995

By integrating WDM to OPS unit which plays an important role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been performed. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals successfully.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.312-315
• /
• 1995

The base/gate drive suppression method proposed by Joshi and Bose is that which detects the output current polarity of the leg and, according to the polarity, suppresses the base/gate drive of one of the ore switching devices of the leg. This method has the merit that it does not have the conventional dead time problem, reduces the power loss of the driving circuit and others. But this method has difficulty in implementation. In this paper, a new base/gate drive suppression method by detecting not the output current polarity but the output voltage polarity is proposed. The proposed method is easier to implement than Joshi and Bose's method.