• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.14-19
• /
• 1998

This paper has described about principle and form of proposed circuit made use of soft switching technology ZVS(Zero-Voltage-Switching) to reduce turn on and off loss at switching. also, the analysis of the proposed circuit has described by using normalized parameter and operating characteristics have been evaluated as to switching frequency and parameters. In addition, this paper proves the propriety of theoretical analysis in terms of the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.329-330
• /
• 2015

This paper introduces a low-frequency switching method for the neutral line of TNPC inverters to achieve high efficiency. By applying the method, the switching loss in the neutral line is reduced. In order to compensate the current distortion near zero-crossing points, the partial switching strategy is applied. Both the simulation and the experimental results verify the usefulness of the proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.236-241
• /
• 2001

This paper presents a novel prototype of active voltage-clamping capacitor-assisted edge resonant soft switching PWM inverter operating at a constant frequency variable power (VPCF) regulation scheme, which is suitable for consumer high-power induction-heating cooking appliances. New generation IGBT with a trench gate is particularly improved in order to reduce conduction loss due to its lowered saturation voltage characteristics. The soft switching load resonant and quasi-resonant inverter designed distinctively using the latest IGBTs is evaluated from an experimental point of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.38-40
• /
• 2002

In the case of conventional high frequency inverter, with damage of switch by surge voltage when switch gets into compulsion extinction by load accident and so on because reactor is connected by series to switch, or there was problem of conduction loss by reactor's resistivity component, Also, it has controversial point of that can not ignore conduction loss of switch in complete work kind action of soft switching. In this paper, as high frequency induction heating power supply, we propose half bridge type multi resonance soft switching high frequency inverter topology that can realize high amplitude operation of load current with controlling switch current by multiplex resonance, mitigating surge voltage when switch gets into compulsion extinction and to be complete operation of zero current switching by opposit parallel connected reactor to inverter switch. and do circuit analysis for choice of most suitable circuit parameter of circuit

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.192-199
• /
• 2008

This paper is mainly concerned with a high frequency soft-switching PWM inverter suitable for consumer induction heating systems. The proposed system is composed of a soft switching chopper based boost PFC converter stage with passive snubber and phase shifted PWM controlled full bridge ZVZCS high frequency inverter stage. Its fundamental operating performances are illustrated and evaluated in the experimental results. Its effectiveness is substantially proved on the basis of the experimental results from a practical point of view.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.490-495
• /
• 2020

The power loss of large-capacity systems using single-phase inverters has attracted considerable attention. In this study, optimal switching sequence model prediction control at a low switching frequency is proposed to reduce the power loss in a high-power inverter system, and a compensation method that can be utilized for model prediction control is developed to reduce errors in accordance with sampling values. When a three-level, single-phase inverter using a switching frequency of 600 Hz and a sampling frequency of 12 kHz is adopted, the power factor is improved from 0.95 to 0.99 through 3 kW active power control. The performance of the controller is also verified.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.51-58
• /
• 2015

In order to decrease the size of a switch mode power supply, high switching frequency can be an efficient way to reduce the size of passive components in the converter. In this paper, a 500-kHz high-frequency LLC resonant converter is proposed with an accurate design method of magnetizing inductance, as well as the relationship between the switching frequency and the size of the passive components. Simulation and experimental results are presented to verify the proposed methods and equations, including the temperature data of each passive and active device of the converter. Using those results, dominant power losses in the prototype converter under 500-kHz high-frequency operation are investigated, compared with the results from a 100-kHz converter. In addition, operating waveforms and power conversion efficiency will be shown to obtain design considerations for the high switching frequency LLC resonant converter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권7호
• /
• pp.3511-3532
• /
• 2019

Coverage-guided fuzzing is an efficient solution that has been widely used in software testing. By guiding fuzzers through the coverage information, seeds that generate new paths will be retained to continually increase the coverage. However, we observed that most samples follow the same few high-frequency paths. The seeds that exercise a high-frequency path are saved for the subsequent mutation process until the user terminates the test process, which directly affects the efficiency with which the low-frequency paths are tested. In this paper, we propose a fuzzing solution, ER-Fuzz, that truncates the recording of a high-frequency path to influence coverage. It utilizes a deep learning-based classifier to locate the high and low-frequency path transfer points; then, it instruments at the transfer position to promote the probability low-frequency transfer paths while eliminating subsequent variations of the high-frequency path seeds. We implemented a prototype of ER-Fuzz based on the popular fuzzer AFL and evaluated it on several applications. The experimental results show that ER-Fuzz improves the coverage of the original AFL method to different degrees. In terms of the number of crash discoveries, in the best case, ER-Fuzz found 115% more unique crashes than did AFL. In total, seven new bugs were found and new CVEs were assigned.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.502-509
• /
• 2013

It presents an efficient switching pattern, which expects a reduction of switching losses in a cascaded H-bridge PWM multilevel inverter. By the proposed switching scheme, the lower H-bridge module operates at low frequency of 60[Hz] because it assigns to transfer most load power. The upper H-bridge module operates at high frequency of PWM switching to improve THD of output voltage. The proposed switching pattern applies to cascaded H-bridge multilevel inverter with PD, APOD, bipolar, and unipolar switching methods. By computer-aided simulations, we verify the validity of the proposed switching scheme. Finally, we prove that the proposed PD and APOD switching patterns are better than those of the conventional one in efficiency.

• 전자공학회논문지S
• /
• 제36S권8호
• /
• pp.113-122
• /
• 1999

본 논문에서는 스위칭 손실을 저감시키고, 높은 주파수 동작에 적합한 새로운 Watkins - Johnson 공진형 컨버터를 제안하였다. 정상상태 해석에서는 제안 된 공진형 컨버터의 전압이득은 스위칭 주파수에 의존하게 된다는 것을 밝혔다. 따라서 컨버터의 출력전압을 안정시키기 위해서는 부하 전류 변화에 따라 스위칭 주파수도 함께 변화시켜야한다. 또한 해석결과를 토대로, 스위치의 전압 스트레스를 최소화시키고, 영전압 스위칭되는 조건하에서 컨버터의 공진소자 값을 결정할 수 있는 최적의 설계방식을 제시하였다. 끝으로 Watkins-Johnson 공진형 컨버터의 실험회로를 구성하여 최적 설계방식의 타당성을 입증하였다.