• Title/Summary/Keyword: switch모듈

Search Result 130, Processing Time 0.036 seconds

3:1 Bandwidth Switch Module by Using GaAs PH Diode (GaAs PIN Diode를 이용한 3:1 대역폭 스위치 모듈)

  • 정명득;이경학;박동철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.5
    • /
    • pp.451-458
    • /
    • 2002
  • Absorptive type SP3T(Single Pole Three Throw) and SP8T switch modules over the 6-18 GHz are designed and fabricated. The epitaxial structure of GaAs PIN diode for switch modules are designed for low loss and high power capability. The maximum input power of SP3T and SP8T switch modules are 2 W and 1 W, respectively. The switching time with driver circuit is less than 130 nsec. The maximum insertion loss of SP3T switch module and SP8T module shows 2.8 dB and 4.2 dB, respectively. The isolation between input port and output port is more than 55 dB. Two switch modules for electronic warfare system have passed the environment tests of the related test items.

Fabrication of Switch Module for ATM Exchange System using MCM Technology (멀티칩 기술을 이용한 ATM 교환기용 Switch 모듈 제작)

  • Ju, Cheol-Won;Kim, Chang-Hun;Han, Byeong-Seong
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.49 no.8
    • /
    • pp.433-437
    • /
    • 2000
  • We fabricated switch module of ATM(Asynchronous Transfer Mode) exchange system with MCM-C(MultiChip Module Co-fired) technology and measured its electrical characteristics. Green tape was used as substrate and Au/Ag paste was used to form the interconnect layers. The via holes were made by drill and filled with metal paste usign screen method. After manufacturing the substrate, chips and passive components were assembled on the substrate. In electrical test, the module showed the output signal of 46.9MHz synchronized with input signal. In the view of substrate size reduction, the area of MCM switch module was 35% of conventional hybrid switch module.

  • PDF

Fault-Tolerance of Wang’s Modified MOBAS and A New Fault-Tolerant ATM Switch Architecture (Modified MOBAS에 대한 고장 감내기법 및 새로운 ATM 스위치 구조의 제안)

  • Gwon, Se-Dong;Park, Hyeon-Min;Choe, Byeong-Seok;Park, Jae-Hyeon
    • The KIPS Transactions:PartC
    • /
    • v.8C no.2
    • /
    • pp.141-154
    • /
    • 2001
  • MOBAS는 규칙적인 모듈로 구성되어 있어 확장이 용이하며, VLSI 구현 시 고집적화 할 수 있고, 각 모듈간에 동기를 맞추기 쉬울 뿐 아니라, 단일 종류의 칩으로 중앙 스위치 구조를 구성할 수 있다. Modified MOBAS(Multicast Output Buffered ATM Switch)는 MOBAS와 유사한 구조를 가지지만 스위치 모듈(SM : Switch Module)의 구조에서 차이를 보이며 적은 스위치소자(SWE : Switch Element)를 사용한다. 위성 통신에서 스위치의 크기뿐 아니라 고장감내 특성도 스위치를 디자인하는데 필요한 중요한 요소이다. 본 논문에서는 Modified MOBAS의 고장 특성을 분석하고 이에 적합한 Detection 기법 및 Location 기법을 제안하였다. 또한 스위치 모듈구조를 변형하여 Modified MOBAS에 비해 약간의 스위치 소자를 더 사용하지만 MOBAS에 비해서는 적은 스위치 소자를 사용할 뿐 아니라, MOBAS와 같이 단일 고장 하에서 성능의 저하가 거의 없다.

  • PDF

Design and Implementation of USB Module for Foot Switch (풋 스위치용 USB 모듈 설계 및 구현)

  • Lee, Jong-Hyeok
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.8
    • /
    • pp.1849-1854
    • /
    • 2010
  • As for information system in hospital which digital hospital aims at, there are PACS(Picture Archiving and Communication System) and soon. PACS transfer and store various medical pictures which are occurring in hospital. The various medical pictures is captured by using keyboard or foot switch during a surgical operation. In this paper, foot switch USB module that can be mounted into a main foot switch case is designed and implemented, it is having a MCU circuit with a built-in micro-controller and a I/O interface having a maximum of five switch. we also developed foot switch control software program with various functions. The result of using the module in the hospital field confirms that the module operates safely.

SSFNet Extension for L4-Switch (L4-Switch를 위한 SSFNet의 확장)

  • 전형인;한종현;이은영;김도환;박승규
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10c
    • /
    • pp.523-525
    • /
    • 2004
  • 규모가 방대한 네트워크상에서 네트워크의 침입과 방어의 효과와 유용성을 알아보기 위해, 실존하는 네트워크상에서 직접 침입과 방어를 테스트하는 것은 많은 노력과 비용이 든다. 이와 같은 문제점을 극복하기 위해 인터넷 침입의 표현에 필요한 네트워크 침입 시뮬레이션을 하기 위한 SSFNet 확장 연구가 진행되었다. 본 연구는 SSFNet에 새로이 추가된 L4-Switch 모듈을 이전 연구에서 만들어진 모듈들과 함께 대규모 네트워크 환경에서 네트워크 침입 시뮬레이션을 테스트하였다. 본 시뮬레이션은 L4-Switch와 http클라이언트, http서비스를 제공하는 호스트들을 설정하고, load balancing이 잘 되었는지를 살펴보았다.

  • PDF

Suggestion of Photovoltaic Switch and Evaluation of Its Usability (태양광 스위치 제안 및 효용성 평가)

  • Jang, Junho;Lee, Junho;Jeong, Juhwan;Jang, Minseok;Lee, Yonsik
    • Journal of the Korea Society of Computer and Information
    • /
    • v.18 no.9
    • /
    • pp.33-41
    • /
    • 2013
  • In this paper, a photovoltaic switch is suggested that is operated by solar module, a substitute for CdS(Cadmium Sulfide) of most existing automatic switches and thus is powered by its renewably charged battery, and its usability is investigated through various experiments. At first the characteristics of CdS and the operation principle of the existing automatic switch are investigated, and then the characteristics of solar module are examined. These preparatory research shows the possibility of substitution of solar module instead of CdS in light activated switch. Secondly the suggested photovoltaic switch's circuit is designed, implemented and then its experimental comparison data shows the possibility for the replacement of the existing switch to the suggested switch, and furthermore its superiorities.

Implementation of High-Power PM Diode Switch Modules and High-Speed Switch Driver Circuits for Wibro Base Stations (와이브로 기지국 시스템을 위한 고전력 PIN 다이오드 스위치 모듈과 고속 스위치 구동회로의 구현)

  • Kim, Dong-Wook;Kim, Kyeong-Hak;Kim, Bo-Bae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.18 no.4 s.119
    • /
    • pp.364-371
    • /
    • 2007
  • In this paper, the design and implementation of high-power PIN diode switch modules and high-speed switch driver circuits are presented for Wibro base stations. To prevent isolation degradation due to parasitic inductances of conventional packaged PIN diodes and to improve power handling capabilities of the switch modules, bare diode chips are used and carefully placed in a PCB layout, which makes bonding wire inductances to be absorbed in the impedance of a transmission line. The switch module is designed and implemented to have a maximum performance while using a minimum number of the diodes. It shows an insertion loss of ${\sim}0.84\;dB$ and isolation of 80 dB or more at 2.35 GHz. The switch driver circuit is also fabricated and measured to have a switching speed of ${\sim}200\;nsec$. The power handling capability test demonstrates that the module operates normally even under a digitally modulated 70 W RF signal stress.

Fabrication of semiconductor optical switch module using laser welding technique (반도체 광스위치 모듈의 제작 및 특성연구)

  • 강승구
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.1
    • /
    • pp.73-79
    • /
    • 1999
  • Semiconductor optical switch modules of 1$\times$2, 1$\times$4, and 4$\times$4 types for 1550 nm optical communication systems were fabricated by using laser welding technique, embodying in 30-pin butterfly package. For better coupling efficiency between switch chip and optical fiber, tapered fibers of 10~15mm lens radii were used, which provided up to 60% optical coupling efficiency. With the help of new laser hammering process, we could recover the lost optical power almost completely up to average 82% of initially obtained power. The fabricated optical switch modules showed good thermal stability of less than 5% degradation even after 200 times thermal cycling test. The 2.5 Gbps optical transmission characteristics of the 4$\times$4 switch module showed low sensitivities of less than -30dB for all possible switching paths. The transmission penalties of 1$\times$2 switch module at $10^{-10}$ BER were 0.6dB and 0.7dB for 50Xm and 90 Km optical fibers, respectively.

  • PDF

Current Balanced Dual Modules Switch Mode AC Line Transformer (전류 평형 듀얼 모듈 스위치 모드 AC 라인 트랜스포머)

  • Kim, Jin-Hong;Yang, Jung-Woo;Jang, Du-Hee;Kang, Jeong-Il;Han, Sang-Kyoo
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.162-164
    • /
    • 2019
  • 본 논문은 전류 평형을 이용한 듀얼 모듈 스위치 모드 AC 라인 트랜스포머를 제안한다. 종래의 PFC DC/DC 컨버터로 구성된 어댑터의 경우 용량이 증가할수록 사이즈가 커지는 한계가 존재했다. 스위치 모드 라인 트랜스포코(Switch Mode Line Transformer, SMLT)는 어댑터의 소형화는 가능하지만, 대용량 어댑터에 적용할 경우 큰 공진전류로 인해 소자의 부피 저감에는 한계가 존재한다. 본 논문에서 제안하는 전류 평형 듀얼 모듈 스위치 모드 AC 라인 트랜스포코는 각 모듈의 트랜스포머 구조를 통해 중소용량의 SMLT 모듈의 병렬구동 시 별도의 전류제어 없이 전압제어만으로 각 모듈의 전류 평형을 이룰 수 있기 때문에 단순한 제어기 구조를 가진다. 또한 각 모듈을 구동하기 위한 IC를 하나의 IC로 통합하여 사용이 가능하며 SMLT의 병렬구동으로 어댑터 사이즈 저감이 가능하다. 제안방식의 타당성 검증을 위해 850W급 시작품에 대한 실험결과를 제시한다.

  • PDF

A Study on the Rx/Tx Switch Module with integrated Low Pass Filter (LPF가 집적화된 Rx/Tx 스위치 모듈에 관한 연구)

  • Song Jae-Sung;Min Bok-Ki;Jeong Soon-Jong;Kim In-Sung
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.54 no.5
    • /
    • pp.185-189
    • /
    • 2005
  • This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.