• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.104.5-104
• /
• 2001

In this paper, we address the swing up control and the singular problem of an acrobot. We derive a serial system equation from the acceleration constraint that there is no actuator on the first joint. Based on the serial system representation, we propose a swing up and stabilization control algorithm to move the acrobot from its downward equilibrium to its inverted equilibrium position. Simulation result is also provided to show the effectiveness of the proposed control strategy.

• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.548-553
• /
• 2008

In this paper, we propose a new swing-up control strategy for rotary inverted pendulums with restricted rotation range. The control law is derived from a Lyapunov function. The Lyapunov function is defined as the square of the sum of the absolute value of the total mechanical energy and weighted squares of the arm's angular displacement and velocity. By adjusting the weighting parameters in the Lyapunov function, we can affect the swing-up strategy such that the restriction on rotation range can be satisfied. Finally, we verify the performance of the proposed control law through simulation and experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권3호
• /
• pp.200-208
• /
• 2014

This paper presents the control of an inverted pendulum system using intelligent algorithms, such as fuzzy logic and neural networks, for advanced control education. The swing up balancing control of the inverted pendulum system was performed using fuzzy logic. Because the switching time from swing to standing motion is important for successful balancing, the fuzzy control method was employed to regulate the energy associated with the angular velocity required for the pendulum to be in an upright position. When the inverted pendulum arrived within a range of angles found experimentally, the control was switched from fuzzy to proportional-integral-derivative control to balance the inverted pendulum. When the pendulum was balancing, a joystick was used to command the desired position for the pendulum to follow. Experimental results demonstrated the performance of the two intelligent control methods.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.835-841
• /
• 2014

In this paper we propose a swing-up strategy for a single inverted pendulum. The proposed method has a feature whereby can handle the input and output constraint of a pendulum in a systematic way. For the swing-up of a pendulum, we adopt a 2-DOF control structure that combines the feedforward and feedback control. In order to generate the swing-up feedforward trajectories that satisfy the input and output constraint, we formulate the problem of generating feedforward trajectories as a nonlinear optimal control problem subject to constraints. We illustrate that the proposed method is more flexible than the existing method and provides great freedom in choosing the actuator of the inverted pendulum. Through an experiment, we show that the proposed method can swing a pendulum upward effectively while satisfying all the imposed constraints.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.432-438
• /
• 2002

In this paper, we described a technique for the swing-up control of a 2 link acrobat robot using a cannonical form which is derived form the law of conservation of an angular momentum based on the center of the first joint. The wide usefulness of the canonical form of the acrobat robot, which was suggested here, is could also be applied to control a free flying robot or an underactuated planar manipulator with no gravity term. Some simulation results are provided to verify the effectiveness of the proposed algorithm

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.84-91
• /
• 2002

A new composite control method for a carriage balancing single inverted pendulum system is proposed and applied to swing up the pendulum and to stabilize it under the state constraint. The target inverted pendulum system has an extremely limited length of the cart(below 16cm). The proposed swing-up controller comprises a sliding mode control algorithm and an optimal control algorithm based on two regions: the region near the inverted unstable equilibrium position and the rest of the state space including the downward stable equilibrium position. The sliding mode controller uses a switching control action to converge along the specified path(hyperplane) derived from energy equation from a state around the path to desired state(standing position). An optimal control method is also used to guarantee the stability at unstable equilibrium position. Compared with the reported controllers, it is simpler and easier to implement. Experimental results are given to show the effectiveness of this controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.71.4-71
• /
• 2001

This paper presents swing up and stabilization control of an underactuated two-link robot called the Pendubot. This device is a two-link planar robot with an actuator at the shoulder, but no actuator at the elbow. The controller swings up first link from its open loop stable equilibrium point to the unstable equilibrium point and then, catches the unactuated second link to balance it there. Two control algorithms are used for this task. Proportional Derivative Control technique is used to design the swing up control. The linear model of Pendubot is obtained by linearizing the nonlinear dynamic equations about the desired equilibrium point and LQR technique is used to design a stabilization controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.690-693
• /
• 2005

In this paper, a hybrid PD-servo state feedback control algorithm for swing up inverted pendulum system is proposed. It consists of two parts. The first part is the PD position control for swinging up the pendulum from the natural pendent position to around the upright position and the second part is the servo state feedback control for stabilizing the inverted pendulum in upright position. The first controller is PD controller and it is tuned to control the position of the pendulum by moving the cart back and forth until the pendulum swings up around the upright position. Then the second controller will be switched to stabilize the inverted pendulum in its upright position. The controller in this stage is the servo state feedback controller designed by pole placement. Experimental results of PD type swinging up control system, of stabilizing servo state feedback control system and of the proposed hybrid PD-servo state feedback control system to swing up and stabilize inverted pendulum show that the proposed method is effective and reliable for actual implementation while it is simple.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.133-134
• /
• 2007

A swing-up control strategy is suggested for a rotary inverted pendulum with restricted rotation range. In order to take the rotation range limitation into account, a new Lyapunov function used for energy-based control is proposed a control strategy is derived from the Lyapunov function. Futhermore, optimization-base parameter estimation is adopted to get an exact mathematical model for the pendulum. Simulation results show that the proposed control strategy swings up the rotary inverted pendulum efficiently.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.371-371
• /
• 2000

A strategy for the swing-up control according to states of the 2-link rotational pendulum is proposed. The proposed controller consists of two modes of control such as divergence mode and stabilization mode. When the controller is in divergence mode, control input is generated using sinusoidal and signum function to make the first and second links reach the bottom and top positions, respectively. After the controller finishes divergence mode, stabilization mode is initiated to keep the pendulum around the top position using pole-placement method. Dynamic models including actuator dynamics are obtained using coordinate changes at each control mode. Simulation results are given to show the effectiveness of the proposed method.