• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.155-167
• /
• 2016

Surface-active substances in defatted rapeseed cake were obtained using a supercritical fluid extraction method. Then, it was purified by removing sinapine in the extract through a series of steps using a mixed solvent: diethyl ether and ethyl acetate (1:1, v/v). Emulsifying properties of purified surface-active substances were investigated, including fat globule size, zeta potentials and creaming stability and its antioxidant activity in emulsion systems were also studied by peroxide value and $^1H$-NMR spectrum. It was found that fat globules in emulsions with purified surface-active substances were much smaller than ones with the unpurified. In addition, as pH of the emulsion lowered and with increasing NaCl concentration in the emulsion, they were observed to increase, which led to worse creaming stability. These properties were reflected in changes of zeta potentials of emulsions. The oxidative stability was better in emulsions with purified surface-active substances than ones with Tween 20 or commercial lecithin, possibly resulted from the existence of sinapic acid in the extract. It was concluded that purified surface-active substances from defatted rapeseed cake could be simultaneously used as emulsifier and antioxidant agent in emulsion system.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.719-726
• /
• 1997

This research was conducted to analyze the change of surface tension, viscosity, streaming current and conductivity of transformer oil when it were injected with the interface active substances.(anionic:S-111, cationic:S-121, amphoteric:S-131) The changes properties of the surface tension and viscosity of the oil which were injected with the interface active substances were divided into the changes area and the minimum reduction area. The surface tension and viscosity of the oil which were injected with three different kinds of interface active substances showed remarkable change at the point where the concentration of the substance in anionic, in cationic and in amphoteric were 100[ppm], 10[ppm] and 1[ppm] respectively. The streaming current and conductivity of the same sample oil were also changed at the same densities of the surface tension and viscosity. For this factor, it was possibile for us to interpret the mechanism of the streaming current and conductivity. Therefore the interface active substances of the three kinds were injected into the oil within the limit of optimal volume, prevention effects of electrification were showed more excellence than unmixed insulating oil.

• 한국정밀공학회지
• /
• 제1권2호
• /
• pp.24-32
• /
• 1984

The object of the study is to discuss the effect of magic ink as a surface active substance on the mechanism of chip formation in oblique cutting. The Rehbinder effect has been known as a phenomenon that the mechanical strength reduces when the metal is coated with some surface active substances. In order to interpret these surface effects defined by Rehbinder, the influence on the shear strength of shear plane by coating surface active substances, cutting force by the depth of cut, surface roughness and hardness ratio were observed. The results are as follows: 1. By coating the magic ink on free surface of the forming chip, the effective shear angle increases, and the cuttinbg force and the deformed chip thickness decreases. 2. With the large inclination angle the effective shear angle increases, and the specific cutting force and the friction angle decrease. 3. Cutting of the coated surface improves the surface roughness and the hardness ratio drops, which means another Rehbinder effect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1410-1412
• /
• 1998

The purpose of this study is to find the way to prevent the electrostatics from the interface of liquid and solid by adding interface active substances to the insulating oil with concentration. As results, The streaming current, surface tension, and viscosity decreased and conductivity increased at the higher point than the c.m.c. which resulted from, the adding of the interface active substances.

• 산업식품공학
• /
• 제15권2호
• /
• pp.175-181
• /
• 2011

초임계 $CO_2$유체를 이용하여 미강 중 표면활성물질을 추출하고 추출물의 표면활성능을 최적화하는 추출 조건을 반응표면분석법을 통해 조사하고자 하였다. 추출수율은 독립변수인 압력, 온도, 보조용매량이 많을수록 높았으며, 보조용매량이 추출수율에 가장 큰 영향을 주었다. 회귀분석을 통해서 얻은 최적 추출 조건은 추출압력 330 bar, 추출온도 $65^{\circ}C$, 보조용매량 250 g이었다. 표면활성능 지표인 계면장력은 추출압력과 추출온도가 증가할수록 그리고 보조용매량이 높을수록 낮았으며, 추출수율과 마찬가지로 보조용매량이 계면장력에 가장 큰 영향을 주었지만 추출압력과 추출온도 등의 변수에 의한 영향은 비교적 적었다. 회귀분석을 통해서 얻은 최적 추출 조건(낮은 계면장력)은 추출압력 350 bar, 추출온도 $65^{\circ}C$, 보조용매량 50 g이었다. 또한 D-optimal design을 통해 얻은 실험 결과를 바탕으로 회귀분석을 하였을 때 예측모델식은 실제 측정값과 비교해 높은 유의성을 나타내는 것으로 판단되었다. 보조용매량이 많을수록 극성 물질이 더 많이 추출되어 낮은 계면장력 값을 예상하였지만 실제 측정 결과 보조용매량이 가장 낮은 조건인 50 g에서 계면장력은 가장 낮게 측정되었다. 이의 규명을 위하여 TLC 및 HPLC 분석을 통한 추출물에 대한 성분 조사, 추출물을 이용한 유화액 제조, 유화액 특성 평가 등 추가 실험이 필요한 것으로 사료되었다.

• 한국응용과학기술학회지
• /
• 제36권1호
• /
• pp.299-304
• /
• 2019

본 연구는 피부표면온도가 유효물질 경피 흡수와 피부 상태변화에 미치는 영향을 실험하였다. 열에 강한 나이아신아마이드 10% 에멀젼을 인공피부에 도포하여 경피 흡수 시험을 진행하였고 동일한 에멀젼으로 피부임상시험을 시행하여 온열효과를 확인하였다. 그 결과 피부표면 온도 $42^{\circ}C$에서 정상 피부 온도보다 도포 10분 경과 후 2배, 15분 경과 후 3배의 경피 흡수 효과를 보였다. 피부임상평가에서는 임상대상자 모두 특이한 이상반응을 보이지 않았으며 수분, 유분 항목에서 통계적으로 유의한 효과를 나타냈다. 이상의 결과로 온열은 유효물질 경피 흡수 촉진과 피부상태 개선에 긍정적인 영향을 미치는 것을 확인하였고 이는 온열을 이용한 다양한 뷰티디바이스 개발에 기초자료가 될 것으로 판단된다.

• 약학회지
• /
• 제38권6호
• /
• pp.637-645
• /
• 1994

The effect of various drugs on the stability of the liposomal membrane of phosphatidylcholine and cholesterol was studied, employing the fluorescence self-quenching method. Calcein was entrapped into the phospholipid small unilamellar vesicles and the leakage of the fluorescence probe was monitored on adding the drug to the system. The results of the experiments showed that phenothiazine derivatives, some potent local anesthetics and surface active agents were very effective in inducing the leakage of calcein from the liposome. The leakage-inducing activity of these drug substances has been ascribed to their surface activity and the perturbation of the liposomal membrane by these substances. On the other hand drug substance with low surface activity or without amphiphilic moieties did not show any effect or only small effect on the leakage of calcein from the liposomes. The effect of lipid concentration on the stability of the liposomes was also investigated to show that the higher concentrations of lipid more drug was required to induce the leakage. The effect of surface charges of vesicles was also studied, and the results showed that the charge on the liposomes enhanced the stability of the liposomes against the leakage-inducing activity of these drug substances.

• 한국식품저장유통학회지
• /
• 제10권4호
• /
• pp.574-583
• /
• 2003

식품의 저장성 및 안전성 향상을 목적으로 필름이나 용기형태의 항균 기능성 포장재를 개발하고자 하는 노력이 지속되고 있으며, 아울러 새로운 고분자 및 항균 소재 탐색에 대한 연구도 활발히 진행되고 있다. 이와 관련하여 기존의 합성 고분자뿐만 아니라 생고분자에 각종 항균제를 첨가 또는 혼입하여 제조한 식품 포장용 항균성 필름이 최근 들어 주목받고 있는데, 이러한 항균성 필름은 담체로 사용된 고분자는 물론 항균제의 종류, 이들의 상호작용에 따라 항균효과 및 지속기간, 필름의 물성 등이 현저하게 달라진다. 따라서 보다 효과적인 식품 포장용 항균 기능성 필름의 제조기술 개발을 위해 발표된 문헌 자료를 토대로 항균필름 제조에 사용된 고분자 소재와 항균제의 종류, 항균활성 평가방법, 제조방법에 따른 항균효과 및 필름의 물성 변화 등 항균필름의 종합적인 항균성 평가 결과를 중심으로 정리하였다.

• Mycobiology
• /
• 제47권3호
• /
• pp.329-334
• /
• 2019

Streptomyces blastmyceticus strain 12-6 was isolated from a forest soil sample of Cheonan area on the basis of strong antifungal activities against plant pathogenic fungi. Butanol extracts of the cultural filtrates were active against C. acutatum, C. coccodes, C. gloeosporioides, F. oxysporum, and T. roseum. Active fractions were prepared by thin layer chromatography using silica gel plate; 12-6-2 ($R_f$ 0.36), 12-6-3 ($R_f$ 0.44). Scanning electron microscopy showed that the active fractions caused a change in surface texture of fungal spores from smooth surface to wrinkled surface. The lethal effect on the spores of the active fractions varied from 56% to 100%. It was shown that the spores of C. acutatum were more sensitive to the antifungal fractions than the spores of F. oxysporum. Fluorescence staining using TOTO-1 indicated that the antifungal fractions could make the spores more sensitive to the fluorescence dye. Thus, it was suggested that antifungal agents prepared in this study exhibited the antifungal activity by damaging the plasma membrane of both fungal spores and hyphae. Identification of antifungal agents in the active fraction using GC-MS analysis revealed the presence of cyclo-(Leu-Pro) and 9-octadecenamide as major components that have already been known as antifungal substances.

• 한국식품영양학회지
• /
• 제26권4호
• /
• pp.831-840
• /
• 2013

본 실험에서는 탈지 유채박 중 표면활성물질의 추출을 위해 초임계 $CO_2$ 유체 추출법을 이용하였다. 추출 독립변수는 추출압력(150~350 bar), 온도($33{\sim}65^{\circ}C$), 보조용매량(ethanol, 150~250 g)으로 하였으며, D-optimal design에 의한 반응표면 분석을 통해 추출수율, 중성지질 분획, 인지질 분획, 당지질 분획 함량 등의 종속변수에 대한 최적 추출조건을 검토하였다. 그 결과, 압력, 온도, 그리고 보조용매량이 증가함에 따라 종속변수 즉, 추출수율, 인지질, 당지질 함량 등은 증가하였으나, 중성지질 함량은 감소하는 것으로 나타났으며, 그중 보조용매량이 각 종속변수에 가장 큰 영향을 주는 것으로 나타났다. 본 연구를 통해서 유도된 회귀식 모형은 실험을 통해 얻은 결과와 잘 일치하였으며, 초임계 $CO_2$ 유체 추출에 있어서 종속변수인 추출수율, 인지질, 당지질 함량 등을 최대로 하면서 중성지질 함량을 최소로 하는 최적화된 추출조건은 추출압력 350 bar, 추출온도 $65^{\circ}C$, 보조용매량 228.55 g으로 분석되었으며, 이 조건에서 추출수율은 5.98%, 추출물은 중성지질 3.0%, 인지질 69.43%, 당지질 17.46% 등의 조성을 나타낼 것으로 예측되었다.