• Applied Microscopy
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2003

The present study was designed to demonstrate ionic zinc in the rat nasal mucosa by means of zinc selenium autometallography ($ZnSe^{AMG}$). Rats were given sodium selenide either intraperitoneally (i.p) or intranasally (i.n). Prior to the i.n. administration the rats were anesthetized with pentobarbital sodium (30 mg/kg, i.p.). A thin plastic tube coupled to a Hamilton syringe was then inserted into the right nostril and $10{\mu}l$ of the solution was instilled. For the i.p. administration non-anesthetized rats were given $100{\mu}l$ of the sodium selenide solution (10 mg/kg). Control rats were instilled with saline. After 2 hrs survival, the rats were anaesthetized and transcardially perfused with 3% glutaraldehyde. The olfactory area was removed and put into same fixative. The nose was then sectioned ($30{\mu}m$) horizontally, autometallography (AMG) was performed according to Danscher et al. (1997). After silver enhancement, fine AMG grains were scattered in the whole length of the olfactory epithelium containing olfactory receptor neurons, sustentacular and basal cells. However, much higher concentration of the AMG grains occupied near the surface and in the basal region of the olfactory epithelium. Both groups of i.p. and i.n. administration showed almost same level in the concentration of the AMG grains. In i.n. group, few AMG grains were also found in olfactory nerves of the lamina propria, suggesting zinc transport into the olfactory bulb via olfactory axons. At the electron microscopic level, the AMG grains were most entirely found in the supporting cells of the olfactory epithelium, and they were mostly localized in lysosome-like organelles. The i.n. group showed various signs of tissue damage of the olfactory mucosa, where dense concentration of AMG grains were localized at crystalloid structures. The present study demonstrated dense population of ionic zinc in the rat olfactory epithelium. zinc may play a role in the olfactory functioin and in the pathogenesis of the neurodegerative disorders affecting nose.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.50-58
• /
• 2014

Due to the cost burden of new construction, the necessity of repair and retrofitting of aged structures is sharply increasing as the domain of repair and retrofitting construction is expanding. Because of the necessity, new technologies for repair and retrofitting are continuously studied in Korea and foreign countries. Steel adhesive method, fiber reinforced plastic (FRP) surface adhesive method, and external prestressing method are used to perform the repair and retrofitting works in Korea. In order to consider a repair method using steel mesh reinforced cement mortar (SMCM), 3-point flexural member test was conducted considering repair area and layer number of SMCM. Five types of specimens including ordinary reinforced concrete (RC) specimen with dimensions of $1400{\times}500{\times}200$ (mm) were cast for testing the deflection measurement, a LVDT was installed at the top center of the specimens. Also, a steel strain gauge and a concrete strain gauge were placed at the center of the specimens. A steel strain gauge was also installed on the shear reinforcement. The 3 point flexural member test results showed that the maximum load of SMCM reinforced specimen was higher than that of basic RC specimen in all of the load-displacement curves. Also, the results showed that, when the whole lower part of the basic RC specimen was reinforced, the maximum load and strain were 1.18 and 1.37 times higher than that of the basic RC specimen, respectively. Each specimen showed a slightly different failure behavior where the difference of the results was caused by the difference in the adhesive level between SMCM and RC. Particularly, in SM-B1 specimen, SMCM spalled off during the experiment. This failure behavior showed that the adhesive performance for RC must be improved in order to utilize SMCM as repair and retrofitting material.

• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.131-140
• /
• 2003

As the importance of accuracy in measurings of 3-D anatomical structures continues to be stressed, an objective and quantitative of assessing image quality and accuracy of 3-D volume-rendered images is required. The purpose of this study was to evaluate the quantitative accuracy of 3-D rendered images obtained with MDCT, scanned at various scanning parameters (scan modes, slice thicknesses and reconstruction slice thickness). Twelve clinically significant points that play an important role for the craniofacial bone in plastic surgery and dentistry were marked on the surface of a dry human skull. The direct distances between the reference points were defined as gold standards to assess the measuring errors of 3-D images. Then, we scanned the specimen with acquisition parameters of 300 mA, In kVp, and 1.0 sec scan time in axial and helical scan modes (pitch 3:1 and 6:1) at 1,25 mm, 2.50 mm, 3.75 mm and 5.00 mm slice thicknesses. We performed 3-D visualizations and distance measurements with volumetric analysis software and statistically evaluated the quantitative accuracy of distance measurements. The accuracy of distance measurements on the 3-D images acquired with 1.25, 2.50, 3,75 and 5.00 mm slice thickness were 48%, 33%, 23%, 14%, respectively, and those of the reconstructed 1.25 mm were 53%, 41%, 43%, 36% respectively. Meanwhile, there were insignificant statistical differences (P-value<0.05) in the accuracy of the distance measurements of 3-D images reconstructed with 1.25 mm thickness. In conclusion, slice thickness, rather than scan mode, influenced the quantitative accuracy of distance measurements in 3-D rendered images with MDCT. The quantitative analysis of distance measurements may be a useful tool for evaluating the accuracy of 3-D rendered images used in diagnosis, surgical planning, and radiotherapeutic treatment.

• Journal of Gifted/Talented Education
• /
• v.19 no.3
• /
• pp.603-646
• /
• 2009

This paper explores in depth Gaston Bachelard's theory of imagination so as to establish the philosophical bases of creativity. While he had begun his studies on imagination to eliminate unreliable subjectivity hampering objectivity of philosophy of science, he was fascinated to become a philosopher of imagination by its unlimited power. Since his theory of imagination marked a prominent spot in the history of Western idea, this paper will seek its significant implications that will also shed light on the philosophical grounds of creativity. The best way to approach his theory is to differentiate whether imagination is the power of forming images or that of transforming them. If not misguided by surface simplicity of the aforementioned differentiation, it will be revealed that it has accrued strata in the history of Western idea. The power of forming images is related to theory of mimesis or of representation, and to ocularcentric and logo-centric structures. Bachelard strongly opposes to the theory of imagination as power of forming images, since, if it is so, its expansion and development are not possible. He thereby constructs the theory of imagination as power of transforming images. The force of movement lies at the core of his theory. Imagination as an ability to intuit movement is directly related to the problem of change in the history of Western idea. If an entity is incessantly changes itself, it becomes a crucial role of imagination to capture the force perse in the perpetual movement without distortedly and abruptly fixing it at a still point of time and space. Bachelard criticizes such a method that makes movement a controllable entity consisting of partitioned moments of space; instead, he constructs theory of imagination that reveals the true power of indispensable movement. Furthermore, it will be revealed that Bachelard's theory has more affinities with Kantian imagination and reflective judgement of aesthetics than the past researches on Bachelard showed. This paper, by means of the above investigation, will transcend the superficiality of defining what are Bachelard's formal, material, and dynamic imaginations; simultaneously, it will bear philosophical conditions of possibility that makes us experience imagination fully. These conditions also become the philosophical foundations of creativity. It will draw to a provisional close its imaginative journey of everlasting movement by making ontological and ethical dimensions of imagination and creativity.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.81-89
• /
• 2009

The seepage should be analyzed to design or reinforce the levees. The steady seepage analysis is an usual application in USA and European countries where the large scaled dams and levees are existed. However, Korea and Japan, where the reaching time is short, the excessive forces are applied on the levees at the short reaching time if the seepages are analyzed in steady condition. Accordingly, the unsteady analysis based on the variation of time is necessitated. In the unsteady analysis, the flood wave type is necessary. No criteria and standards, however, are derived for the unsteady seepage in Korea. In the study, the flood wave type is derived for the unsteady seepage. The major reliable flood surface data are collected in 5 stations including Jindong of the Nakdong river basin. The data are sorted in duration, and they are non-dimensionalized. The statistical method is also applied to derive the waves. To verify the study, the seepage is analyzed by the derived wave and applied to the prototype. The results are also compared with the Japanese Method. The errors between the hydraulic gradient and critical velocity method are $0{\sim}0.7%$, $0{\sim}0.7%$ at the Jindong, $1.6{\sim}4.0%$, $1.7{\sim}4.1%$ at the Hyunpoong, $0.6{\sim}3.6%$, $0.6{\sim}3.7%$ at the Waegwan, $2.0{\sim}8.1%$, $2.0{\sim}8.1%$ at the Nakdong, and $1.2{\sim}9.8%$, $1.3{\sim}9.9%$ at the Jeongam, respectively. The relationship($R^2$) between each method is relatively high as $0.983{\sim}0.999$. This means the results are more logical than the Japanese method, and the study is applicable to the design of hydraulic structures.

• Journal of Korean Society of Forest Science
• /
• v.80 no.1
• /
• pp.32-41
• /
• 1991

This study is focusted to the national park of Korean typical mountain Chi-ri, its visual resources of forests, and practiced inspectind course by way of hypothesis and tests, to show visual resource management objectively, and that of quantitative basic data. spatial image structure measured by Semantic Differential(S.D.) Scale was shown through factor analysis algorithm for the analyzing psychological amount and examined the flowing out of decisive factor and the objective importance related mutual factors by appling the measurement of visual quality. Also, it has been investigated the differences between the degrees of expectation which is used before and of satisfaction which is used, by appling instrumental expectation theory. And showed patterns of investigation area through factor analyzing algorithm. As a national Park, visual factors that have natural landscape harmonized forest, sky, surface of the water, curious stones and rocks, temples should be escalate their values affirmatively so as to be the scenery of pointed direction and enjoyable, and it is needs the techniques visual resource management and its controlling technique to make artificial structures more intentional planning and systemical setting. Manmade distinctive quality in the spatials that affect complementally or harmonizingly, should be received considering relations between the distifution and joining which in line with various visual presenting massive factors. More than that, it is needed united basic standard to the beauty of arrangements which contain visual continuity considered balance between nature and human work, simplicity of structural types, assimilation, emphasis, unification of different factors and pro rata.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.39-45
• /
• 2012

To explore on the defense strategies against hervivory of 67 broadleaved tree species, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Taean-gun, Chuncheongnam-do were investigated. 46 broadleaved tree species(68.7%) had the domatia structures, and 21 species including Quercus salicina and Magnolia grandiflora did not. 31 species including Juglans mandshurica and Carpinus laxiflora reveals tuft type, 12 species including Quercus dentata and Corylus heterophylla reveals pocket+tuft type, and 2 species, Sorbus alnifolia and Prunus yedoensis does pocket type, and Viburnum odoratissimum var. awabuki does pouch type. Domatia number per leaf proves the highest figures, 23.4/leaf for Quercus dentata. Plant defense strategies using leaf lower-surface trichomes of Magnolia grandiflora reveals dense villous, those of Populus alba and Vitis vinifera reveals dense pilose, that of Elaeagnus umbellata does dense scaly hairs, that of Pueraria lobata does dense strigose. Plant defense strategies using extrafloral nectaries were adapted 23 tree species(34.3%). Observed examples are Prunus tomentosa, Ficus carica, Viburnum dilatatum and Carpinus laxiflora. Predatory mites were observed on the leaves of 40 tree species(59.7%), and mean values of predatory mites was highest values 23.4/leaf in Quercus dentata. Minute arthropods destroying the leaf of broadleaved trees. are such as Periphyllus californiensis, P. viridis, Diaspididae sp., gall mites, thrips, and total numbers observed were odered gall mites, Diaspididae sp., aphids and thrips. Natural enemies of these hervivores arthropods are such as predatory mites, Chilocorus rubidus, Coccinella septempunctata and the nymph, Aphidius ervi. These results indicate that defense strategies including protective mutualisms may be frequent in the temperate broadleave trees.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.1059-1075
• /
• 2017

The objective of this study was to evaluate the freezing and thawing resistance of the existing drainage system for leakage treatment of underground concrete structures operating in cold regions. The freezing and thawing test was conducted on 4 types of drainage system specimens to evaluate the freezing and thawing resistance of the drainage system. The freezing and thawing resistance was evaluated on 4 types of Hotty-gel, as a waterproofing material, connection methods and on two methods to fix the drainage board with Hotty-gel on the surface of cement concrete specimen. One cycle of the freeze-thaw testing was 48 hours (24 hours of freezing and 24 hours of thawing), and the temperatures of freezing and thawing were at $-18^{\circ}C$ and $10^{\circ}C$, respectively. Among the 4 types of Hotty-gel connection methods, leakage occurred after 28 cycles (8 weeks) of freeze-thawing only in the Hotty-gel connection method with the 'V' groove applied to the corner of the drainage board. No leakage occurred in the 3 types of Hotty-gel connection methods. In two fixing methods, leakage occurred in the method of fixing the drainage board on the cement concrete specimen using the washer, screw and plastic wall plug. Leakage occurred at one point after 10 cycles (3 weeks) of freezing and thawing. After 28 cycles (8 weeks) of freezing and thawing, leakage point increased to 5 points. As time passed, the leak point was not increased, but the amount of leakage was increased at each leak point. The Hotty-gel connection method with cross-sectional diagonal shape was evaluated to be the highest in the production efficiency considering the production time and manufacturing method of the Hotty-gel connection shape. In the construction efficiency considering the construction time and construction method, the fixing method of air nailer, fixed nail and washer was superior to that of the washer, screw and plastic wall plug.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.1
• /
• pp.19-30
• /
• 2009

The main fault of Yangsan Fault Zone (YFZ) and Quaternary fault were found in a trench section with NW-SE direction at an entrance of the Sinheung village in the northern Eonyang, Ulsan, Korea. We interpreted the movement history of the southern part of the YFZ from the geometric and kinematic characteristics of basement rock's fault of the YFZ (Sinheung Fault) and Quaternary fault (Quaternary Sinheung Fault) investigated at the trench section. The trench outcrop consists mainly of Cretaceous sedimentary rocks of Hayang Group and volcanic rocks of Yucheon Group which lie in fault contact and Quaternary deposits which unconformably overlie these basement rocks. This study suggests that the movement history of the southern part of the YFZ can be explained at least by two different strike-slip movements, named as D1 and D2 events, and then two different dip-slip movements, named as D3 and D4 events. (1) D1 event: a sinistral strike-slip movement which caused the bedding of sedimentary rocks to be high-angled toward the main fault of the YFZ. (2) D2 event: a dextral strike-slip movement slipped along the high-angled beddings as fault surfaces. The main characteristic structural elements are predominant sub-horizontal slickenlines and sub-vertical fault foliations which show a NNE trend. The event formed the main fault rocks of the YFZ. (3) D3 event: a conjugate reverse-slip movement slipped along fault surfaces which trend (E)NE and moderately dip (S)SE or (N)NW. The slickenlines, which plunge in the dip direction of fault surfaces, overprint the previous sub-horizontal slickenlines. The fault is characterized by S-C fabrics superimposed on the D2 fault gouges, fault surfaces showing ramp and flat geometry, asymmetric and drag folds and collapse structures accompanied with it. The event dispersed the orientation of the main fault surface of the YFZ. (4) D4 event: a Quaternary reverse-slip movement showing a displacement of several centimeters with S-C fabrics on the Quternary deposits. The D4 fault surfaces are developed along the extensions of the D3 fault surfaces of basement rocks, like the other Quaternary faults within the YFZ. This indicates that these faults were formed under the same compression of (N)NW-(S)SE direction.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.