• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.35-36
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.65-67
• /
• 2008

An adaptive response surface method with Latin Hypercube sampling strategy is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed algorithm consists of the multi-objective Pareto optimization and ($1+{\lambda}$) evolution strategy to find the global optimal points with relatively fewer sampling data. In the adaptive RSM, an adaptive sampling point insertion method is developed utilizing the design sensitivities computed by using finite element method to set a reasonable response surface with a relatively small number of sampling points. The developed algorithm is applied to the shape optimization of PM poles for 6MW BLDC motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.701-702
• /
• 2008

An adaptive response surface method with Latin Hypercube sampling strategy is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed algorithm consists of the multi-objective Pareto optimization and (1+${\lambda}$) evolution strategy to find the global optimal points with relatively fewer sampling data. In the adaptive RSM, an adaptive sampling point insertion method is developed utilizing the design sensitivities computed by using finite element method to get a reasonable response surface with a relatively small number of sampling points. The developed algorithm is applied to the shape optimization of PM poles for 6 MW BLDC motor, and the cogging torque is reduced to 19% of the initial one.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권2_spc호
• /
• pp.28-54
• /
• 2020

Even though a systematic sampling approach is very crucial in both the general and detailed investigation phases to produce the best conceptual site model for contaminated sites, the concept is not yet established in South Korea. The U.S. Environmental Protection Agency (EPA) issued the 'Strategic Sampling Approaches Technical guide' in 2018 to help environmental professionals choose which sampling approaches may be needed and most effective for given site conditions. The EPA guide broadly defines strategic sampling as the application of focused data collection across targeted areas of the conceptual site model (CSM) to provide the appropriate amount and type of information needed for decision-making. These strategic sampling approaches can prevent the essential data from missing, minimize the uncertainty of projects and secure the data which are necessary for the important site-decisions. Furthermore, these provide collaborative data sets through the life cycle phases of projects, which can generate more positive proofs on the site-decisions. The strategic sampling approaches can be divided by site conditions. This technical guide categorized it into eight conditions; High-resolution site characterization in unconsolidated environments, High-resolution site characterization in fractured sedimentary rock environments, Incremental sampling, Contaminant source definition, Passive groundwater sampling, Passive sampling for surface water and sediment, Groundwater to surface water interaction, and Vapor intrusion. This commentary paper introduces specific sampling methods based on site conditions when the strategic sampling approaches are applied.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.220-223
• /
• 2012

현재 일반적으로 사용되는 Time Domain Sampling(아래 TDS) 방식의 SAW Device는 빠른 Data 처리를 할 수 있지만 그만큼의 빠른 sampling 속도를 요구하기 때문에 고속의 AD 컨버터가 필요하다. 이 고속의 AD 컨버터는 고가의 장비로 Device 제작에 부담이 되는 실정이다. 반면에 Frequency Domain Sampling(아래 FDS) 방식으로 구현된 SAW Device는 고속의 sampling을 요구하지 않기 때문에 고가의 고속 AD 컨버터가 필요하지 않다. 이렇게 느린 sampling 속도는 상대적으로 고속의 processing을 요구하게 되는데 이는 저가의 Embedded System만으로도 구현이 가능하기 때문에 가격대비 성능에서 효율이 훨씬 높다고 할 수 있다. 그럼에도 FDS 방식의 SAW sensor를 제작하는 것이 까다롭기 때문에 현재 구현된 FDS 방식의 SAW Device는 매우 드문 실정이다. 본 연구에서는 이 문제를 해결하기 위해 기존의 TDS용 SAW sensor를 그대로 이용한 FDS 방식의 SAW Device에 대해 설계 및 구현한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.312-315
• /
• 2012

현재 일반적으로 사용되는 Time Domain Sampling(아래 TDS) 방식의 SAW Device는 빠른 Data 처리를 할 수 있지만 그만큼의 빠른 sampling 속도를 요구하기 때문에 고속의 AD 컨버터가 필요하다. 이 고속의 AD 컨버터는 고가의 장비로 Device 제작에 부담이 되는 실정이다. 반면에 Frequency Domain Sampling(아래 FDS) 방식으로 구현된 SAW Device는 고속의 sampling을 요구하지 않기 때문에 고가의 고속 AD 컨버터가 필요하지 않다. 이렇게 느린 sampling 속도는 상대적으로 고속의 processing을 요구하게 되는데 이는 저가의 Embedded System만으로도 구현이 가능하기 때문에 가격대비 성능에서 효율이 훨씬 높다고 할 수 있다. 그럼에도 FDS 방식의 SAW sensor를 제작하는 것이 까다롭기 때문에 현재 구현된 FDS 방식의 SAW Device는 매우 드문 실정이다. 본 연구에서는 이 문제를 해결하기 위해 기존의 TDS용 SAW sensor를 그대로 이용한 FDS 방식의 SAW Device에 대해 설계 및 구현한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.167-174
• /
• 1994

In this study, an improved response surface method is proposed. By using gradient projection method, the sampling points for creating response surface are evaluated at the region close to the failure surface. This points are combined with linear response surface function and Rackwitz-Fiessler algorithm. Also, a method controlling the range of selecting sampling points considering the non-linearity of the limit states is proposed to reduce the error produced by approximating the non-linear limit state to linear response surface. With the examples the result of the proposed method is found to be more accurate and efficient than the previous response surface method.

• 한국습지학회지
• /
• 제3권1호
• /
• pp.61-73
• /
• 2001

This study was performed to survey the characteristics of surface water and soil in Wangdungjae wetland located at Chiri-Mountain. The results of survey summarized as follows; 1. The physico-chemical characteristics of surface water such as pH, temperature, and DO were in the range of 6.02-6.39, $13.5-24.3^{\circ}C$ and 3.81-9.97 mg/L, respectively. Also, the organic concentrations such as BOD and COD were in the range of 1.3-1.61 mg/L and 3.55-9.97 mg/L, respectively. The water quality of five different sampling sites showed the similar characteristics. 2. The physico- chemical characteristics of soil showed the different properties with the soil sampling depth. According to increasing sampling depth, cation exchange capacity (CEC) and electric conductivity (EC) increased but pH decreased. 3. The future survey and researches on surface water and soil environments are needed to preserve the Wangdungjae wetland at Chiri-mountain marsh.

• 한국CDE학회논문집
• /
• 제15권1호
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.