• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.60-67
• /
• 2006

In modem days when architectural materials have grave impacts on overall design expression, materials for architecture, especially finishing materials have become the most essential elements for the design expression, as architectural space and form have been. When it comes to the architectural materials, they can be conceived by visual and tactile sensory system and perceptional system which based on memory and experience. This study confirms how materials bring into effect on architecture in the sense of its design. The main subject of this analysis is expression method of architectural finishing materials. Also, this study finds out the relationship between finishing materials and the images of materials by analyzing the effect factor of architectural material expression with the perspectives of materials, formal and environments and by examining roles of the architectural materials in design. The material factor, in the expression of materiality, is how to make tectonic space and to vary the surface of building as finishing material design. The formal factor is related to set up the new direction in the architectural form and to create the dynamic and informal space. And the social and cultural environment as the effect factor gives new situation and context to architectural material expression. This principle enables us to use architectural materials as one of the important elements which express the whole characteristics of the area.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.607-614
• /
• 2015

일반적으로 건축물의 마감은 기본적인 발수성을 가진 수성페인트 마감으로 이루어진다. 이는 건축물 외벽에 작업시 적용하기 쉬우며, 건축물 유지 또한 쉬워 많은 장점을 가지고 있다. 하지만 자외선으로 인해 변색 또는 열화 되기 쉬워 그 효과는 기대에 미치지 못하고 있다. 따라서 본 연구는 외부 표면마감 재료로서 발수제를 직접 혼입한 수성페인트의 색 변화를 통한 내구성능을 분석하여 실제 현장에 적용하기 위한 실용성을 평가하고자 하였다. 촉진 시간에 따른 색 변화 및 색차를 측정하였으며, 적용가능성은 실험결과를 토대로 평가하였다. 색차, 명도 및 색도의 변화량을 실험결과에 따라 종합적으로 고려해 볼 때 본 연구에서 제안한 발수제를 혼입한 수성페인트 마감공법(혼입율 2, 5, 8%)은 충분히 사용 가능할 것으로 사료된다. 이는 건축물의 외부 표면을 수성페인트로 칠한 후 추가로 발수제를 도포하는 등의 기존 표면 마감방법에 비해 공사내용이 간편하며 시공성도 양호하여 폭넓은 활용이 기대된다. 또한 실제 현장에서는 원하는 색상으로 필요한 양만큼 제조하여 사용할 수 있으며, 전문 인력이 필요하지 않아 손쉽게 활용 가능할 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.98-102
• /
• 1994

There are many difficulties in automatic polishing for die & mold surfaces. Even though the process has been studied in the past 15 years, it has not been achieved yet, but by the process of actual hand work of well-skilled workers. A new magentic assisted polishing process, which is one of the potential method for automation of surface finishing has been studied in the past 10 years by colleagues. The process has many merits, but on the other hand also has demerits, one being low efficiency of gridability by comparision with grinding wheel polish. Therefore, some attempts were tried to improve the grindability by adopting electropolishing, ultra-high speed milling, 5-axis controlled machine etc... most recently by collegues. This study also aims to improve the efficiency of polishing by introducing the easily-polished shape surface milling method equalizing the tool feed per tooth to the pick feed. This milling method was experimentally confirmed to have sufficient grindability to polish milled surface (with 10 .mu. mRmax surface roughness) into mirror surface (with 0.4 .mu. mRmax surface roughness).

• 설비공학논문집
• /
• 제21권4호
• /
• pp.236-242
• /
• 2009

In finishing work, defects are often taken place by many factors. One of them is the thermo-humidity condition on the work surface as coating and anointing adhesives. Thus, the condition of thermo-humidity on work surface should be checked prior to the finishing work. However, many construction companies show a tendency to overlook it because not only are measurement tools so expensive but they don't have skilled hands about those tools. Therefore, we propose the measurement method that makes it easy to recognize surface thermo-humidity condition so as to reduce constructional flaws. And then we test this product. The test progresses to four stages with various conditions. We evaluate its usefulness and application possibility of this product in the field.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.309-317
• /
• 2015

This study is the high contraction processing conditions set by the method of the CPB process. And the ultimate goal of this study is the high contraction of the CPB processing test method that can solve the problems of the high-contraction fabric processing method of the current jet dyeing machine. Non-coating process(CPB process) developed by the expression of a soft touch, light weight, functional and to develop excellent breathable nylon fabric. The nylon fabrics established the optimum processing conditions through the high contraction of the various test conditions, the CPB system.(The benzyl alcohol was used as the main constrictor.) At this time, the warp and weft contraction of nylon fabric was about 20%. And it established the constrictor concentration, the treatment temperature, time of a variety of tests. Also non-coating process(CPB process) can develop soft touch, lightweight, excellent air permeability. As a result, we developed a high contraction nylon fabric having a uniform surface. Manufactured fabric is used for Wind-proof and Down-proof.

• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.13-18
• /
• 2006

The magnetic abrasive machining has been developed as a new finishing technology to obtain a fine surface of workpiece. In this paper, a static magnetic field method and a magnetic abrasive brush which has many technical advantages, are applied for the magnetic abrasive machining. In the experiment, some items such as finishing time, ratio of the magnetic abrasives to Fe-powder, motor revolutions per minute, and motor ratio revolutions per minute are tested. The results of this study have shown the fact that the burr height is mostly affected by the finishing time and the abrasive ratio. Also, it has been found that the magnetic abrasive machining is a possible new technology for the deburring.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.557-560
• /
• 2003

Magnetorheological finishing(MRF) is a newly developed and recently commercialized for finishing optical components. The magnetorheological fluid consists of a water based suspension of carbonyl iron, nonmagnetic polishing abrasives, and small amounts of stabilizer. This magnetorheological fluid is pumped from conditioner on the rotating wheel and suctioned back to the conditioner, where it cooled to setpoint temperature and evaporative losses are replaced. This method could produce some problems in suction. So newly designed MRF tools is proposed in which MR fluid is not circulated and conditioned by the slurry. The new polishing mechanism is experimented. Measured surface roughness supports the validity of this mechanism.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.782-787
• /
• 1997

This paper proposes methods for pencil machining and uncut area machining. Based on Z-map represented by triangular facets, self-intersection-free offset surface is generated with K-offset method in case of ball mill and flat mill Pencil machining can elliminate overload area before main machining rough, semi-finish and finish cutting,preventing fluctuations of cutting forces in concave regions form causing bad machining condition. Low productivity is caused by uncut area which has excessive or irreguar finishing allowance. Uncut area machining has the finishing allowance keep uniformly on part surface. This paper deals with two types of uncaut area, machining detection of excessive area and user-defined area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.133-134
• /
• 2019

As part of recent low-energy policies, thermal insulation standards for buildings are being tightened every year. The importance of external insulation methods is increasing due to the strengthening of insulation standards. Among the main materials used in the external insulation method, dry bit material is a finishing material composed of an organic binder and aggregate. When the fire occurs, the ignition of the surface part causes a direct fire on the thermal insulation material at the rear side when heat energy is concentrated. Therefore, it is important that the finishing material in dry insulation using a dry bit has a low fire spreading property in case of a fire and does not have a sustained combustion. The purpose of this study was to evaluate the fire spreadability by changing the internal fillers while using alkoxide-based acrylic emulsions, hybrid acrylic emulsions, and general acrylic emulsions in order to suppress the fire spreading properties of exterior finish materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1522-1526
• /
• 2005

In this study, the fabrication of large area silicon mirror is accomplished by anisotropic etching using MEMS for implementation of integrated optical pickup and the process condition is also established for improving the mirror surface roughness. Until now, few results have been reported about the production of highly stepped $9.74^{\circ}$ off-axis-cut silicon wafer using wet etching. In addition rough surface of the mirror is achieved in case of long etching time. Hence a novel method called magnetorheolocal finishing is introduced to enhancing the surface quality of the mirror plane. Finally, areal peak to valley surface roughness of mirror plane is reduced about 100nm in large area of $mm^2$ and it is applicable to optical pickup using infrared wavelength.