• Korean Journal of Materials Research
• /
• v.1 no.2
• /
• pp.93-98
• /
• 1991

The as-grown $YBa_2Cu_3O_{7-x}$ superconducting thin films on MgO(100) substrate have been prepared by a reactive coevaporation method. The superconducting transition temperature, surface morphology and crystalline quality were examined as a function of the substrate temperature ranging from $450^{\circ}C$ to $590^{\circ}C$. From the reflection high energy electron diffraction (RHEED) analysis, it was found the film consisted of almost amorphous phase with a halo pattern deposited at the substrate temperature of $450^{\circ}C$. The film deposited at the substrate temperature of $510^{\circ}C$ consisted of polycrystalline phase, showing a broad ring pattern. On the other hand, for the film deposited at $590^{\circ}C$, RHEED showed spotty pattern indicating that this film consisted of single crystal phase. It has rough film surface due to the surface outgrowth. The surface outgrowth increased as the substrate temperature increased from $510^{\circ}C$ to $590^{\circ}C$. the surface outgrowth may be due to the anisotropic growth rate. The highest transition temperature obtained in this study was $Tc_{zero}$ of 83K with $Tc_{onset}$ of 88K for the film deposited at $590^{\circ}C$ using activated RF oxygen plasma.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.115-128
• /
• 2011

Textile fabrication based on traditional culture has grown very attentive as fashion icons in recent so that designers, especially, who want to be the center of attention, may be a public interest and introduce their own culture to the world. In the 21st century by more focusing of our culture, Korean textile designs that is applicable our traditional motifs are required to develop and also its motifs could be comprehensibly got the spirit and the inherent meaning, and should be fuse with modern touch and developed practical design in daily life. Of all many different patterns, this paper placed an emphasis on three of main traditional motifs as a floral arabesque pattern, ivy pattern and butterfly pattern. The traditional motifs were applied through a hand-made technology and the professional design program of TexPro, and then the textile design was simulated by Photoshop to approaching the apparel design. Through these produced artworks, we have conscious that the oriental images have associate traditional meaning and the traditional design tried to express co-existence past and present. Moreover, we believe that the surface pattern design of textile for printing was good chance to relive the traditional meaning, and the tradition is recognized not mere old and expects more advance with applications.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.434-442
• /
• 2006

The purpose of this study was to develop the beautiful basic bodice pattern that satisfied both functionality and aesthetics on the basis of the change in the figure and length of surface body for each movement through a three-dimensional development figure of surface body for young women (aged between 18 and 24) who were very sensitive to fitness of clothes. Existing three basic bodice patterns (Yim wonja-, ESMOD-, and FIT-types) were selected and then compared and analyzed in terms of drawing methods and the wearing test was carried out by a sensory test in order to design an experimental prototype. The design of study prototype was improved by three wearing test that was correlated with low satisfactory item. And the ease was established by difference of previous direct measurement and body surface measurement.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.187-194
• /
• 2002

For the fine grinding process development of semiconductor monocrystalline silicon, wheel rotational speed, chuck rotational speed, feed rate and hysteresis force were controlled. Magic mirror system was used for grinding wheel pattern analysis. Curvature of wheel pattern was measured by fitting equation. The modeling of surface wheel pattern was related to wheel and chuck rotational speed. The calculated curvature of the model was well matched with the measured curvature. The statistical analysis indicated wheel and chuck rotational speed were significantly effective on.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1008-1017
• /
• 2005

When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.223-235
• /
• 1998

A dedicated CAM(Computer-Aided Manufacturing) system has been developed, which generated tool-path to machine Styrofoam stamping die-patterns in Chrysler Corporation. A previous process to build die-patterns was to "stick build" the pattern, in which stock is cut & glued together, and then the NC machining of part-surface shape completes building a Styrofoam die-pattern. The current process utilizes the developed CAM system, and almost removes the manual work, consequently reduces the overall lead time. The paper presents the overall system structures, tool-path generation, and some features of Styrofoam pattern machining.

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.35-45
• /
• 2012

The development of digital media made the change of architectural paradigm from tectonic to the surface and pattern. This means the transition to the new kind of materiality and the resurrection of ornament. This study started as an aim to apply biological pattern to architectural design from the new perception of pattern. Architectural patterns in the early era appeared as ladders, steps, chains, trees, vortices. But since 21st century, we can find patterns in nature like atoms and molecular structures, fluid forms of dynamics and new geometrical pattern like fractal and first of all biological patterns like viruses and micro-organisms, Voronoi cells, DNA structure, rhizomes and various hybrids and permutations of these. Pattern became one of the most important elements and themes of contemporary architecture through the change of materiality and resurrection of ornament with the new perception of surface in architecture. One of the patterns that give new creative availability to the architectural design is biological pattern which is self-organized as an optimum form through interaction with environment. Biological patterns emerge mostly as self-replicating patterns through morphogenesis, certain geometrical patterns(in particular triangles, pentagons, hexagons and spirals). The architectural application methods of biological patterns are direct figural pattern of organism, circle pattern, polygon pattern, energy-material control pattern, differentiation pattern, parametric pattern, growth principle pattern, evolutionary ecologic pattern. These patterns can be utilized as practical architectural patterns through the use of computer programs as morphogenetic programs like L-system, MoSS program and genetic algorithm programs like Grasshoper, Generative Components with the help of computing technology like mapping and scripting.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.904-921
• /
• 2021

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.