• Journal of Ocean Engineering and Technology
• /
• v.20 no.1 s.68
• /
• pp.43-47
• /
• 2006

Superposition of three wave trains on finite depth is investigated. This paper is focused on how to improve the linear superposition of three waves. This was realized by introducing the scheme. The idea of the scheme is based on a fixed point approach. Application of the scheme to the superposition makes it possible to obtain a wave profile of wave-wave interaction. With the help of FFT, it was possible to analyze high-order nonlinear frequencies for three interacting Stokes' waves on finite depth.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1608-1609
• /
• 2011

In this study, in order to develop the evaluation method for XLPE materials for HVDC cables, DC/Impulse superposition testing system was builded up. Throughout the P-spice simulation, optimal values of the protection resistor for the DC generation system and the blocking capacitor for the Impulse generator were calculated. DC/Impulse superposition system showed good result maintaining their proper wave shapes and amplitudes. This system would be planned to apply to the evaluation of XLPE materials for HVDC cables.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.775-784
• /
• 2010

In this paper we propose a design method of X band frequency hopping synthesizer in terms of phase noise and settling time with DDS driven PLL architecture, which has the advantages of high frequency resolution, fast settling time and small size. In addition, a noble method is proposed to remove the synthesizer output spurious signals due to superposition effect of DDS. The spurious signal which depend on its normalized frequency of DDS, can be dominant if they occur within the PLL loop bandwidth. We verify that the sources of that spurious signals are quasi-amplitude modulation and superposition effect, and suggest that such signals can be eliminated by intentionally creating frequency errors in the developed synthesizer.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.244-250
• /
• 1998

In this study, the stress intensity factors of center crack are analyzed when it is surrounded by symmetrically distributed small cracks. The values of stress intensity factors of the center crack are greatly influenced by the locations of distributed small cracks. When small cracks overlap or approach near the tip of a center crack, the effect of interaction arisen by these cracks becomes noticeable. In case of multiple distributed small cracks, the stress intensity factor of a center crack is found to be efficiently determined by the superposition method.

• Biomedical Science Letters
• /
• v.27 no.2
• /
• pp.99-104
• /
• 2021

Treatment techniques that affect homeostasis by non-invasive regulation in peripheral organs will advance disease research. Here, we demonstrate a non-invasive method of conditioning within an organ using a low-frequency stimulator superposition of alternating microcurrent wave in stages. It is first applied to the inflammatory response in H3N2-infected sinusitis mice. To check the progress of the treatment, mice were sacrificed every week for 3 weeks, nasal tissue was removed, and the inflammatory response was investigated through H & E staining. The low-frequency stimulation treatment group was found to alleviate the proliferation of epithelial cells and invasion of inflammatory cells compared to the control group as the passage of treatment time. The reduction of inflammatory cytokines in the nasal lavage fluid was observed in H3N2-infected sinusitis mice treated with of low-frequency stimulation using superposition of alternating microcurrent wave compared to H3N2-infected sinusitis mice after 3 weeks. These data demonstrate that low-frequency stimulation device in the form of using alternating current wave superposition on within organs provides a new method to regulate specific physiological functions. Therefore, it is necessary to prove the inhibitory effect of low-frequency stimulation using alternating current wave superposition on inflammatory diseases by various methods through further studies and clinical studies.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.3
• /
• pp.27-35
• /
• 2011

Larbi (1995) and Jeong et al. (2005) analyzed the various boundary end conditions of buried pipelines using the mode superposition method as one of the dynamic analysis methods of buried pipelines. However, it is very complicated to derive calculation equations for the solutions to be obtained by this method, and even the derived calculation equations need separate computer programming for the numerical analysis in order to obtain the solutions. For this reason, this method is extremely difficult for engineers to apply in their field works. In consideration of the shortcoming of the mode superposition method, this study's purpose is to propose a 3D dynamic finite difference method, which is more easily applicable in the field. For this purpose, we tested the accuracy of the 3D dynamic analysis and compared the results with those of the mode superposition method and certified that the 3D dynamic analysis could be an alternative method to obtain the seismic responses of the pipelines.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.777-787
• /
• 2012

The transient analysis for the output voltage of a piezoresistive microaccelerometer takes a relatively high computation time because at least two iterations are required to calculate the piezoresistive-structural coupled response at each time step. In this study, the high computational cost for calculating the transient output voltage is considerably reduced by an approach integrating the mode superposition method and the least square method. In the approach, data on static displacement and output voltage calculated by piezoresistive-structural coupled simulation for three acceleration inputs are used to develop a quadratic regression model, relating the output voltage to the displacement at a certain observation point. The transient output voltage is then approximated by a regression model using the displacement response cheaply calculated by the mode superposition method. A high-impact microaccelerometer subject to several types of acceleration inputs such as 100,000 G shock, sine, step, and square pulses are adopted as a numerical example to represent the efficiency and accuracy of the suggested approach.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.89-92
• /
• 2000

In this paper, an effective procedure is presented for the local recovery of displacements and stresses in multilayered composite panels, which incorporate the local refinement using mesh superposition. The mesh superposition method is used to refine the global coarse mesh by superimposing refined mesh to the localized zone of interest without transition zones. The finite element model used is a solid element based on the Hellinger-Reissner variational principle. The a posteriori computation of the through-the-thickness distributions of displacements and stresses is achieved using a predictor-corrector procedure. The procedure utilizes the superconvergent stresses and nodal displacements of the finite element patch. The element patch is generated by locally superimposing a refined local mesh to the coarse global mesh.

• Steel and Composite Structures
• /
• v.20 no.2
• /
• pp.295-316
• /
• 2016

This paper presents the results of experimental investigation, numerical calculation and theoretical analysis on axial compression ratio limit values for steel reinforced concrete (SRC) special shaped columns. 17 specimens were firstly intensively carried out to investigate the hysteretic behavior of SRC special shaped columns subjected to a constant axial load and cyclic reversed loads. Two theories were used to calculate the limits of axial compression ratio for all the specimens, including the balanced failure theory and superposition theory. It was found that the results of balanced failure theory by numerical integration method cannot conform the reality of test results, while the calculation results by employing the superposition theory can agree well with the test results. On the basis of superposition theory, the design limit values of axial compression ratio under different seismic grades were proposed for SRC special shaped columns.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.373-383
• /
• 2005

The cask is used to transfer the radioactive material in various fields required to withstand hypothetical accident condition such as 9m drop impact in accordance with the requirement of the domestic requlations and IAEA. So far the impact force has been obtained by the finite element method with complex computational procedure. In this study, the dynamic impact response of the cask body is analyzed using the mode superposition method, and the analysis method is proposed. The results we also validated by comparing with previous experimental results and finite element analysis results. The present method Is simpler than finite element method and can be used to predict the global impact response of cask