• 한국초전도ㆍ저온공학회논문지
• /
• 제24권2호
• /
• pp.19-22
• /
• 2022

We studied the effect of substrate-induced strain state on the superconducting transition in GdBa₂Cu₃O_7-x(GdBCO)/La_0.7Sr_0.3MnO₃ (LSMO) bilayers deposited on a LaAlO₃ (LAO) substrate. The stain state of LSMO is controlled by increasing the thickness from 20 nm to 80 nm. Analyses on the extended X-ray absorption fine structure (EXAFS) measurements reveal difference in the direction of MnO₆ octahedral distortion depending on the LSMO thickness, which leads to a difference in anisotropy of magnetization of LSMO layer. The superconducting transitions of our system are strongly correlated with the magnetic anisotropy accompanied by the MnO₆ octahedron distortion in a specific direction. This result suggests the possibility of improving the superconducting transition in the GdBCO/LSMO bilayer system by controlling the degree of competition between superconductivity and ferromagnetism via adjusting strain state in the LSMO layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.486-489
• /
• 2002

Temperature(T) dependence of the sheet resistance( $R_{$\square$}$) has been investigated on the c-axis oriented thin films of the (Bi2212/Bi2201) mixed crystal with different molar fractions. The $R_{$\square$}$-T superconducting characteristic deteriorated with reduction of the Bi2212 fraction, and almost disappears at 48 mol% where a superconductor-to-insulator transition took place, with the resistance on the normal state, RN, reaching 4.l㏀ at 80 K. This $R_{N}$ value is close to the universal quantum number, h/(2e)$^2$≡6.5㏀ predicted by the Kosterlitz-Thouless(KT) transition theory. The $R_{$\square$}$-T characteristics of the 48 mol% thin film can be elucidated as a competitive process of KT transition brought about by charge or vortex in the two-dimensional layer structure.e.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.210-213
• /
• 1999

Magnetoresistance and magnetization of Sr$_{l-x}K_xBiO_3$ were both measured as functions of temperature and magnetic field. Resistivity goes to zero at T=10.1K and the overall superconducting transition behavior under applied magnetic fields is similar to that of other BiO based superconductors. Also, below T<5K we have observed the reappearance of finite resistivity with a power law temperature dependence( ${\rho}$ ${\sim}$T$^1$); the reentrant superconducting transition of resistivity. Contrary to the Josephson weak link effect in polycrystalline samples, which gives the depression of the superconducting state with increasing electrical current or magnetic field, the superconducting state for T<5K is resumed by applying a higher current or magnetic field. Magnetic susceptibility( ${\chi}$ ) of Sr$_{l-x}K_xBiO_3$ for T<5K also shows similar trends to that observed in transport measurements: increase of ${\chi}$ (paramagnetic-like behavior) at a low magnetic fields(B=50 Oe) and, the resumption of perfect diamagnetism at high fields.

• Bulletin of the Korean Chemical Society
• /
• 제20권3호
• /
• pp.281-284
• /
• 1999

Two La1.82Ca1.18Cu2O6+δ (2126) compounds exhibited different properties depending upon how they were synthesized. The compound prepared under high oxygen pressure showed superconductivity. But the compound prepared under low oxygen pressure did not exhibit superconductivity, and showed a metal-insulator transition. Our study on these compounds shows that a small amount of additional oxygen intercalated into the superconducting phase plays an important role for superconductivity. The Fermi surface of non-superconducting 2126 compound possesses nesting phenomena, which is the reason for the M-1 transition. On the other hand, the superconducting 2126 compound does not show Fermi surface nesting. This is because the additional oxygen removes some electrons from Cu d-orbitals, thereby bradking the Fermi surface nesting.

• 대한화학회지
• /
• 제42권6호
• /
• pp.599-606
• /
• 1998

산화물 초전도체 발견 후 많은 이론적 발전이 있었으나, 초전도 상전이를 정확히 설명하는 이론은 아직 없다 하겠다. 특히 상전이점 근처에서 발견되는 이중전이(double transition)나 다양한 자기적 상전이에 대해서는 아직 정확한 이해가 없는 상태이다. 본 논문에 서는 전자유체의 응축모델을 사용하여 초전도 전이에 있어서, 전자기체의 응축과정이 CONFINEMENT와 TRAP의 두 단계로 일어남을 알았다. 이 두 단계 전이 메카니즘은 이중전이를 잘 설명할 뿐만 아니라, 여러 형태의 초전도에서 보이는 자기적 성질, 특히 다양한 vortex structure를 보여주는 magnetic phase transition을 잘 설명할 수 있었다. 여러 종류의 초전도체들에서 공통적으로 발견되는 double transition과 다양한 magnetic phase transition을 잘 설명할 수 있는지 여부가 초전도 현상 설명의 일반이론으로 적합한지를 결정할 것이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.20-25
• /
• 2018

Niobium nitride (NbN) superconducting thin films with the thickness of 100 and 400 nm have been deposited on the surfaces of silicon oxide/silicon substrates using a sputtering method. Their superconducting properties have been evaluated in terms of the transition temperature, critical magnetic field, and critical current density. In addition, the NbN films were patterned in a line with a width of $10{\mu}m$ by a reactive ion etching (RIE) process for their characterization. This study proves the applicability of the standard complementary metal-oxide-semiconductor (CMOS) process in the fabrication of superconducting thin films without considerable degradation of superconducting properties.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.355-360
• /
• 1990

One of the possible ways to make a flexible wire of high-Tc superconductiong ceramics is the extrusion of a mixture slurry of superconducting powder with an appropriate polymer binder. The fabrication procedure for $YBa_2Cu_3O_{7-{\delta}}$ superconducting coils with this plastic mass is described. The major factors limiting the formation of extruded wire are the binder content, powder size, and entrapped gas in the mixture slurries. The optimum content of binder for both good flexbility and strength of wire was estimated to be 30wt%. The finer the powder size is, the more homogeneous structure the extruded wire has. The vacuum degassing before extrusion was necessary to remove the entrapped gas in as-extruded wire. The formability of wire depends greatly on the wire radius and binder content. After burning out the binder and the successive sintering, the contacts between the superconducting grains could be made. The resistivity vs. temperature behavior measured in the final wire showed the transition temperature of 90K with narrow transition width. However, the critical current densities of these wires are much lower in comparison to those of conventional bulk specimens.

• 한국전자통신학회논문지
• /
• 제17권2호
• /
• pp.279-290
• /
• 2022

초전도 한류기는 초전도 전이를 이용하여 전류를 제어하는 전력기기로, 수 msec 이내에 고장전류를 정상전류로 변환하여 전력계통의 유연성, 안정성 및 신뢰성을 높일 수 있는 기기이다. 고온초전도 선재는 상전이 속도가 빠르고 임계전류밀도가 높으며 교류손실이 적어 초전도 한류기에 적합한 소재이지만 최적화 연구가 부족함에 따라 고온초전도 선재 특성에 의존하는 기존 방식은 한류소자의 설계, 투입 선재의 양 등에 있어 비효율적이다. 따라서 초전도 한류기에 적합한 선재를 개발하기 위해 임계전류 균일도 향상, 최적의 안정화재 재료 선정 및 균일 적층 기술 개발 연구가 수행되었다. 본 연구를 통하여 개발된 고온 초전도 선재는 710m 길이에서 평균 804 A/12mm-w의 임계전류를 가지는 선재제조 기술을 확보함에 따라 효율성 향상, 비용 절감 및 크기 축소로 경제적 성과를 확보할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.60-65
• /
• 2003

An effective modeling and simulation scheme of a resistive type Superconducting fault Current Limiter (SFCL) using PSCAD/EMTDC is proposed in this paper. In case of High Temperature Superconducting (HTS) resistive type fault current limiter current limiting is implemented by the ultra-fast transition characteristics from the superconducting (non-resistive) state to the normal (resistive) state by overstepping the critical current density. The states can generally be divided into three sub-states: the superconducting state the quench state and the recovery state respectively. In order to provide alternative application schemes of a resistive type SFCL, an effective modeling and simulation method of the SFCL is necessary. For that purpose, in this study, an actual experiment based component model is developed and applied for the simulation of the real resistive type SFCL using PSCAD/EMTDC. The proposed simulation scheme can be implemented to the grid system readily under various system conditions including sort of faults and the system capacity as well. The simulation results demonstrate the effectiveness of the proposed model and simulation scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.131-133
• /
• 1995

Inductive high-Tc superconducting fault current limiter using YBCO superconducting ring in the secondary part has many advantages in power networks. It is based on the superconducting to normal transition and this paper describes its operational characteristics and experimental results, especially focused on the harmonic component analysis and recovery time. We fabricated and tested it under various conditions for the analysis of transient fault characteristics. And for the analysis of harmonics we used FFT methods. The superconducting ring was quenched in 240Arms and fault current was effectively limited to the lower current level. In addition, it was fast recovered when the fault condition was removed and after fault the system had odd harmonics.