• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3831-3843
• /
• 2023

The adsorption behaviour of Se(-II) onto granite and MX-80 bentonite in Ca-Na-Cl solutions has been studied utilizing adsorption experiments and surface complexation modelling. Adsorption kinetic experiments allude to steady-state adsorption periods after 7 days for granite and 14 days for MX-80 bentonite. Batch adsorption experiments were carried out to determine the influence that the physicochemical solution properties would have on Se(-II) adsorption behaviour. Adsorption of Se(-II) onto granite and MX-80 bentonite follows the trend of anionic adsorption, with a decrease in R_d values as the solution pH increased. There is also an ionic strength influence on the adsorption of Se(-II) onto granite with a decrease in the R_d value as the ionic strength increased. This effect is not found when observing Se(-II) adsorption onto MX-80 bentonite. Final experiments with a representative groundwater, determined that the adsorption of Se(-II) onto granite and MX-80 bentonite returned R_d values of (1.80 ± 0.10) m³·kg^-1 and (0.47 ± 0.38) m³·kg^-1, respectively. In support of the experiments, a surface complexation modelling approach has been employed to simulate the adsorption of Se(-II) onto granite and MX-80 bentonite, where it was determined that two different surface complexes, ≡S_Se^- and ≡SOH₂⁺_H₂ were capable of simulating Se(-II) adsorption behaviour.

• 분석과학
• /
• 제29권5호
• /
• pp.219-224
• /
• 2016

A sensitive method to detect trace anions in hydrofluoric acid (HF) by solid-phase extraction (SPE) clean-up and ion chromatography (IC) was described. Fluoride in HF solution was eliminated with solid-phase extraction, and residual fluoride, acetate, chloride, bromide, nitrate, phosphate and sulfate were consecutively separated with IC. The SPE parameters (selection of adsorbent, sample volume and pH, elution solvent and its volume) were optimized and selected. The removal effect of fluoride in HF solution was the best on Oasis WAX column, and the optimum conditions (1.0 mL of 25 % HF solution and 50 mM ammonium acetate 5 mL as elution solvent) were established by the variation of parameters. Under the established condition, the method detection limits of chloride, bromide, nitrate, phosphate, and sulfate were 0.04~0.30 µg/L in 25 % HF solutions (w/w) and the relative standard deviation was less than 5 % at concentrations of 20.0 and 40.0 µg/L. The concentrations of anions in a 25 % HF had detectable levels of 4.2 to 47.5 µg/L. The method was sensitive, reproducible and simple enough to permit the reliable routine analysis of anions in HF solution used in the process of producing semiconductors.

• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.99-104
• /
• 2024

이진트리의 최소 선형 배열(MinLA) 문제의 해는 선형 복잡도 O(n)의 근사 알고리즘으로 구하고 있으며, k = 10에 대해 다양한 근사 알고리즘 수행 결과가 제시되어 있고, 단지 2개 알고리즘만이 최적 해 3,696을 얻었다. 본 논문은 이진트리의 정확한 해를 O(n) 복잡도로 구하는 알고리즘을 제안하였다. 제안된 알고리즘은 먼저, n = 2^k - 1개 노드들에 중위 탐색(in-order search) 방법으로 번호를 부여하고, 2 ≤ 𝑙 ≤ k-2, (k = 5)와 2 ≤ 𝑙 ≤ k-3, (k = 6) 레벨에 존재하는 노드들에 대해 단 노드 자식들까지의 범위를 대상으로 번호를 재배열하는 방법을 적용하였다. 제안된 알고리즘을 k=5,6,7에 적용한 결과 Chung[14]의 S^(k)_min=2^k-1+4+S^(k-1)_min+2S^(k-2)_min 이론을 증명하였으며, S⁽⁵⁾_min에 대해서는 Chung[14]의 60보다 좋은 58을 얻었다. 또한, 기존의 근사 알고리즘들은 배열 결과를 제시하지 않고 있는데 비해 제안된 알고리즘은 정확한 배열 방법도 제시하는 장점을 갖고 있다. 따라서 제안된 알고리즘은 k > 10인 이진트리에 대해서도 항상 빠르게 최적의 해를 얻을 수 있기 때문에 기존의 근사 알고리즘을 적용하지 않아도 된다.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.775-782
• /
• 2003

In the study, the total conductivies in [(Ce $O_2$)$_{1-x}$ (Zr $O_2$)$_{x}$]$_{0.8}$(Sm $O_{1.5}$)$_{0.2}$ (x- 0, 0.05, 0.1, 0.2) solid solution were measured as a function of temperature and oxygen partial pressure between 80$0^{\circ}C$ and 1,00$0^{\circ}C$ using 4-probe d.c method. Under pure oxygen atmospere, the oxygen ionic conductivity of [(Ce $O_2$)$_{1-x}$ (Zr $O_2$)$_{x}$]$_{0.8}$(Sm $O_{1.5}$)$_{0.2}$ decreased with the concentration of Zr $O_2$At high oxygen partial pressure, the electrical conductivity is almost independent of oxygen partial pressure and decreased with the increase in Zr content. However, the electrical conductivity increase with decreasing oxygen partial pressure and is almost independent of Zr content at low oxygen partial pressure. Empirically, Total conductivity( $\sigma$ ) was expressed by the p$o_{2}$ -independent conductivity as $\sigma$$_{i}$, and the $p_{-1/4}$ $o_{2}$sup -dependent part as $\sigma$$_{e}$. Total, ionic and electronic conductivities fitted by data enabled to determine the transference number. The ionic transference number( $t_{i}$ ) decreased while the electronic transference( $t_{e}$ ) increase with the increase in Zr content and p$o_{2}$.

• 한국재료학회지
• /
• 제32권2호
• /
• pp.57-65
• /
• 2022

Herein a rich, Se-nanoparticle modified Mo-W₁₈O₄₉ nanocomposite as efficient hydrogen evolution reaction catalyst is reported via hydrothermal synthesized process. In this work, Na₂SeSO₃ solution and selenium powder are used as Se precursor material. The structure and composition of the nanocomposites are characterized by X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), EDX spectrum analysis and the corresponding element mapping. The improved electrochemical properties are studied by current density, and EIS analysis. The as-prepared Se modified Mo-W₁₈O₄₉ synthesized via Na₂SeSO₃ is investigated by FE-SEM analysis and found to exhibit spherical particles combined with nanosheets. This special morphology effectively improves the charge separation and transfer efficiency, resulting in enhanced photoelectric behavior compared with that of pure Mo-W₁₈O₄₉. The nanomaterial obtained via Na₂SeSO₃ solution demonstrates a high HER activity and low overpotential of -0.34 V, allowing it to deliver a current density of 10 mA cm^-2.

• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.1021-1022
• /
• 2003

• 대한수학회논문집
• /
• 제23권1호
• /
• pp.61-65
• /
• 2008

In this paper we prove that every positive solution of the third order rational difference equation $$x_{n+1}\;=\;\frac{{\beta}x_n\;+\;x_{n-2}}{A\;+\;Bx_n\;+\;x_{n-2}}$ converges to the positive equilibrium point $$\bar{x}\;=\;\frac{{\beta}\;+\;1\;-\;A}{B\;+\;1}$, where $0\;<\;{\beta}\;{\leq}\;B$, $1\;<\;A\;<\;{\beta}\;+\;1$

• 폴리머
• /
• 제37권5호
• /
• pp.663-668
• /
• 2013

고분자가 adefovir dipivoxil(AD)과 suberic acid(SUB)의 공결정 형성에 미치는 영향을 연구하였다. 고분자 첨가제는 poly(ethylene glycol)(PEG)과 poly(acrylic acid)(PAA)를 이용하였다. 용액에서 AD와 SUB를 혼합한 후에 고분자를 첨가하여 공결정을 제조했을 때는, 고분자의 영향은 결정모양과 결정성을 일부 변화시키는 것에 한정되었는데, 이러한 영향은 고분자 없이도 용액에 과량의 SUB를 이용하거나 용매첨가 분쇄법으로 유도할 수 있었다. 한편, 용액에서 AD와 고분자를 혼합한 후에 SUB를 첨가하여 공결정을 제조했을 때는, PEG의 경우 공결정의 변화를 훨씬 효과적으로 유도하였는데 결정성을 기준으로 같은 농도에서 3배 이상의 효과를 보였다. 또한 PAA의 경우에는 결정의 형성을 완전히 억제하는 효과를 보였다. 본 연구의 결과는 공결정 형성에 미치는 고분자의 영향을 단순히 혼합순서를 바꾸어서 조율할 수 있는 예를 보여 주었다.

• 센서학회지
• /
• 제30권2호
• /
• pp.94-98
• /
• 2021

In this study, pure and Co3O4/CoFe2O4-loaded Indium oxide (In2O3) nanofibers were synthesized by the electrospinning of an Indium/Polyvinylpyrrolidone precursor solution containing cobalt and iron bimetallic zeolitic imidazolate frameworks and subsequent heat treatment. The ethanol, toluene, p-xylene, benzene, carbon monodxide, and hydrogen gas sensing characteristics of the solution were measured at 250-400 ℃. 0.5 at%-Co3O4/CoFe2O4-loaded In2O3 nanofibers exhibited extreme response (resistance ratio - 1) to 5 ppm of ethanol (210.5) at 250 ℃ and excellent selectivity over the interfering gases. In contrast, pure In2O3 nanofibers exhibited relatively low responses to all the analyte gases and low selectivity above 250-400 ℃. The superior response and selectivity toward ethanol is explained by the catalytic roles of Co3O4 and CoFe2O4 in gas sensing reaction and the electronic sensitization induced by the formation of p (Co3O4/CoFe2O4)-n (In2O3) junctions.

• 한국재료학회지
• /
• 제16권8호
• /
• pp.524-528
• /
• 2006

On the synthesis of Au/$TiO_2$ core-shell structure nanoparticle, the effect of concentration of $Ti^{4+}$ and reaction temperature on the morphology and optical property of Au/$TiO_2$ core-shell nanoparticles is examined. A gold colloid was prepared by $HAuCl_4{\cdot}4H_2O\;and\;C_6H_5Na_3{\cdot}2H_2O$. Titanium stock solution was prepared by mixing solution of titanium(IV) isopropoxide (TTIP) and triethanolamine (TEOA). The concentrations of $Ti^{4+}$ stock solution were adjusted to $10.01{\sim}0.3$ mM, and then the gold colloid is added to the $Ti^{4+}$ stock solution. Au/$TiO_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of the $Ti^{4+}$ stock solution at $80^{\circ}C$. The size of synthesized Au nanoparticles was 15 nm. The thickness of $TiO_2$ shell on the surface of gold particles was about 10 nm. The absorption peak of synthesized Au/$TiO_2$ core-shell nanoparticles shifted towards the red end of the spectrum by about 3 nm because of the formation of $TiO_2$ shell on the surface of gold particles. The good $TiO_2$ shell is produced when $Ti^{4+}$ concentration is varied between 0.01 and 0.05 mM, and reaction temperature is maintained at $80^{\circ}C$. The crystal structure of $TiO_2$ shell was amorphous.