• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.448-456
• /
• 2010

The mechanical behavior of granular soils is affected by particle bonding including natural cementation. This study addresses a simple model of small strain stiffness and salt concentration based on wave measurements of salt-cemented particulate media. Published models of artificially cemented soils with different curing methods and several types of cementation agents are reviewed. Glass beads with the median diameter of D50 = 0.5mm are prepared in rectangular cells using the water-pluviated method in salt water with different concentrations. Piezo disk elements and bender elements embedded in the cell are used for the measurements of compressional and shear waves. The relationships between elastic wave velocities and salt concentration show an exponential function. The measured small strain stiffness matches well the predicted small strain stiffness based on micromechanics for simple cubic monosized sphere particles. This study demonstrates that the salt concentration in salt-cemented specimen may be evaluated by using elastic wave velocities.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.57-62
• /
• 2021

Recently, the atomically thin two-dimensional transition-metal dichalcogenides (TMDs) have received considerable attention for the application to next-generation semiconducting devices, owing to their remarkable properties including high carrier mobility. However, while a technique for growing graphene is well matured enough to achieve a wafer-scale single crystalline monolayer film, the large-area growth of high quality TMD monolayer is still a challenging issue for industrial application. In order to enlarge the size of single crystalline MoS₂ monolayer, here, we systematically investigated the effect of process parameters in molten-salt-assisted chemical vapor deposition method. As a result, with optimized process parameters, we found that single crystalline monolayer MoS₂ can be grown as large as 420 ㎛.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.39-42
• /
• 2012

To study the physical and chemical properties, solid solutions of $(Sr_{1-x}Ba_x)NdFe{^{3+}}_{1-\tau}Fe{^{4+}}_{\tau}O_{4-y}$ system with x=0.0(SBN-0), 0.1(SBN-1), 0.2(SBN-2) and 0.3(SBN-3) were synthesized in air at 1,473 K and annealed in air at 1,073 K for 24 h. X-ray powder diffraction assured that the four samples had tetragonal symmetries (I4/mmm). Their lattice volumes increased gradually with x values. Nonstoichiometric chemical formulas were formulated using the data such as $\tau$(amount of $Fe^{4+}$ ion) and y(oxygen deficiency) values using Mohr salt analysis. It was found out that all the four samples had excessive oxygen (4-y>4.0). All the samples started to lose some of their oxygen at around 613K(TG/DTA thermal analysis). They exhibited semiconductivities in the temperature range of around 283-1173K. All the four specimens had sufficient tensile strength to endure the force of 19.6 N (2 kg of weights) and the conductivity values of the ECIAs which were painted on pieces of glass with the area of $150mm^2$ ($10mm{\times}15mm$) and it was in the order of ECIA-0${\rightarrow}$ECIA-1${\rightarrow}$ECIA-2${\rightarrow}$ECIA-3 at a constant temperature.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.11
• /
• pp.1526-1532
• /
• 2021

Suaeda australis, Phragmites australis, Suaeda maritima, Suaeda glauca Bunge, and Limonium tetragonum in the Seocheon salt marsh on the west coast of the Korean Penincula were sampled in order to identify the endophytes inhabiting the roots. A total of 128 endophytic fungal isolates belonging to 31 different genera were identified using the fungal internal transcribed spacer (ITS) regions and the 5.8S ribosomal RNA gene. Fusarium, Paraconiothyrium and Alternaria were the most commonly isolated genera in the plant root samples. Various diversity indicators were used to assess the diversity of the isolated fungi. Pure cultures containing each of the 128 endophytic fungi, respectively, were tested for the plant growth-promoting abilities of the fungus on Waito-C rice germinals. The culture filtrate of the isolate Lt-1-3-3 significantly increased the growth of shoots compared to the shoots treated with the control. Lt-1-3-3 culture filtrate was analyzed and showed the presence of gibberellins (GA₁ 2.487 ng/ml, GA₃ 2.592 ng/ml, GA₉ 3.998, and GA₂₄ 6.191 ng/ml). The culture filtrate from the Lt-1-3-3 fungal isolate produced greater amounts of GA₉ and GA₂₄ than the wild-type Gibberella fujikuroi, a fungus known to produce large amounts of gibberellins. By the molecular analysis, fungal isolate Lt-1-3-3 was identified as Gibberella intermedia, with 100% similarity.

• Journal of Plant Biotechnology
• /
• v.6 no.4
• /
• pp.205-212
• /
• 2004

The objectives were to compare the salt tolerance levels in the parental rice cultivar, Dongjinbyeo, and induced mutagenesis derived its lines for plant height, MDA, ATPase, POD, and 2-dimensional protein electrophoresis pattern in NaCl-containing hydroponic nutrient solutions. Rice plants isolated from a population of rice (Oryza sativa L. cv. Dongjinbyeo) mutation lines, which were generated in combination with in vitro selection and gamma-ray, exhibited salt tolerance. Line No. 18 had the longest plant, whereas NaCl-sensitive line (No. 25) had the shortest plant. The parent, and the sensitive line showed severe damage from salt stress. Tolerant lines (No. 18, 50) had a lower malonaldehyde (MDA) content than the sensitive one (Dongjinbyeo, No. 25) during salt stress. Several proteins showed significant quantitative variation through 2DE; phosphoribulokinase, peroxidase, oxygen evolving enhancer 1 and the $H^+-ATPase$, which are known to be involved in salt tolerance. The effect of salt on peroxidase and $H^+-ATPase$ activity in the seedlings of two groups with contrasting genotypes of rice was studied. A greater activity was recorded in the tolerant lines as compared to the sensitive ones (P<0.05, Duncan's test). The results indicate that salt tolerant lines expressed more salt stress-inducible proteins associated with salt tolerance than the sensitive lines during salt stress.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.145-149
• /
• 2015

The electrochemical behavior of $Nd_2O_3-La_2O_3-NiO$ mixed oxide including rare earth resources has been studied to synthesize $La_{0.5}Nd_{0.5}Ni_5$ alloy in a LiCl molten salt. The $Nd_2O_3-La_2O_3-NiO$ mixed oxide was converted to $NiNd_2O_4$ (spinel) and $LaNiO_3$ (perovskite) structures at a sintering temperature of $1100^{\circ}C$. The spinel and perovskite structures led a speed-up in the electrolytic reduction of the mixed oxide. Various reaction intermediates such as Ni, $NiLa_2O_4$ were observed during the electrochemical reduction by XRD analysis. A possible reaction route to $La_{0.5}Nd_{0.5}Ni_5$ in the LiCl molten salt was proposed based on the analysis result.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2003

Doubled haploids have long been recognized as a valuable tool in plant breeding since it not only offers the quickest method of advancing heterozygous breeding lines to homozygosity, but also increased the selection efficiency over conventional procedures due to better discrimination between genotypes within any one generation. Salt tolerant mutants were obtained in rice the variety, 'Hawsungbyeo', through in vitro mutagenesis of in vitro cultured anther-derived calli. Various doses (30, 50, 70 and 90 Gy) of gamma ray were applied to investigate the effect of radiation on callus formation on medium containing 1% NaCl, green plant regeneration, frequency of selected doubled haploid mutants and of the salt tolerant screen. It was demonstrated that the dose of 30 and 50 Gy gamma rays had significant effects on callus formation, regeneration and selection of salt tolerance. No tolerant lines were obtained from non-mutagenized cultures. From gamma ray irradiated cultures, five tolerant lines ($M_2$generation) at germination stage and 13 tolerant lines ($M_3$genoration) at seedling stage were obtained. The frequency of salt tolerant mutants indicates that anther culture applied in connection with gamma rays is an effective way to improve salt tolerance.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.1
• /
• pp.9-19
• /
• 2016

Xylanases sourced from different bacteria have significantly different enzymatic properties. Therefore, studying xylanases from different bacteria is important to their applications in different fields. A potential xylanase degradation gene in Massilia was recently discovered through genomic sequencing. However, its xylanase activity remains unexplored. This paper is the first to report a xylanase (XynRBM26) belonging to the glycosyl hydrolase family (GH10) from the genus Massilia. The gene encodes a 383-residue polypeptide (XynRBM26) with the highest identity of 62% with the endoxylanase from uncultured bacterium BLR13. The XynRBM26 expressed in Escherichia coli BL21 is a monomer with a molecular mass of 45.0 kDa. According to enzymatic characteristic analysis, pH 5.5 is the most appropriate for XynRBM26, which could maintain more than 90% activity between pH 5.0 and 8.0. Moreover, XynRBM26 is stable at 37℃ and could maintain at least 96% activity after being placed at 37℃ for 1 h. This paper is the first to report that GH10 xylanase in an animal gastrointestinal tract (GIT) has salt tolerance, which could maintain 86% activity in 5 M NaCl. Under the optimum conditions, K_m, V_max, and k_cat of XynRBM26 to beechwood xylan are 9.49 mg/ml, 65.79 μmol/min/mg, and 47.34 /sec, respectively. Considering that XynRBM26 comes from an animal GIT, this xylanase has potential application in feedstuff. Moreover, XynRBM26 is applicable to high-salt food and seafood processing, as well as other high-salt environmental biotechnological fields, because of its high catalytic activity in high-concentration NaCl.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2305-2308
• /
• 2012

Perovskite structured barium titanate particles ($BaTiO_3$) platelets were synthesized by molten salt synthesis and topochemical microcrystal conversion. As the precursors of $BaTiO_3$, plate-like $BaBi_4Ti_4O_{15}$ particles were first synthesized by the reaction of $Bi_4Ti_3O_{12}$, $BaCO_3$, and $TiO_2$ at $1080^{\circ}C$ for 3 h in $BaCl_2$-KCl molten salt. After the topochemical reactions, layer-structured $BaBi_4Ti_4O_{15}$ particles transformed to the perovskite $BaTiO_3$ platelets. $BaTiO_3$ particles with thickness of approximately $0.5{\mu}m$ and a length of $10-15{\mu}m$ retained the morphology feature of the $BaBi_4Ti_4O_{15}$ precursor. For <001> $Pb(Mg_{1/3}Nb_{2/3})O_3-32.5PbTiO_3$ (PMNT)-5 wt % PbO piezoelectric ceramics textured with 5 vol % of $BaTiO_3$ templates, the Lotgering factor reached 0.82, and $d_{33}$ was 870 pC/N.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.460-468
• /
• 2022

Due to its high electrical conductivity, low contact resistance, good weldability and high corrosion resi-stance, gold is widely used in electronic components such as connectors and printed circuit boards (PCB). Gold ion salts currently used in gold plating are largely cyan-based salts and non-cyanic salts. The cya-nide bath can be used for both high and low hardness, but the non-cyanide bath can be used for low hardness plating. Potassium gold cyanide (KAu(CN)₂) as a cyanide type and sodium gold sulfite (Na₃[Au(SO)₃]₂) salt as a non-cyanide type are most widely used. Although the cyan bath has excellent performance in plating, potassium gold cyanide (KAu(CN)₂) used in the cyan bath is classified as a poison and a toxic substance and has strong toxicity, which tends to damage the positive photoresist film and make it difficult to form a straight side-wall. There is a need to supplement this. Therefore, it is intended to supplement this with an eco-friendly process using sodium sulfite sodium salt that does not contain cyan. Therefore, the main goal is to form a gold plating layer with a controllable hardness using a non-cyanide gold plating solution. In this study, the composition of a non-cyanide gold plating solution that maintains hardness even after annealing is generated through gold-palladium alloying by adding thallium, a crystal regulator among electrolysis factors affecting the structure and hardness, and changes in plating layer structure and crystallinity before and after annealing the correlation with the hardness.